The 3G-SDI Fiber Optic Extender from AV Matrix extends HD/SD signals up to 3G-SDI using your fiber optic cable network. This transmitter and receiver set has a range of up to 12.5 miles and features dual 3G-SDI outputs on the receiver. Supporting all SDI video resolutions up to 1080p at a bandwidth of up to 3Gb/s, this compact set is compatible with single-mode LC simplex fiber cable. Features include SDI equalization, re-clocking, hot-pluggable SFP modules with LC connectors, and up to 16-channel embedded audio support. This set includes two USB cables, 5V power adapters, and mounting brackets.

1 x Transmitter & 1 x Receiver    Transmits 1080p up to 12.5 Miles    3Gb/s Maximum Bandwidth    SD-SDI/HD-SDI/3G-SDI Automatic Switching    Dual 3G-SDI Outputs on Receiver    SDI Equalization & Re-Clocking    Hot-Pluggable SFP Module with LC Port    2 x USB Cables and 2 x 5V Power Adapters    2 x Mounting Brackets

Extends HD/SD signals up to 3G-SDI, 1080p over single-mode LC fiber optic cable

Supports range of up to 12.5 miles

SDI input and loop out, LC single-mode fiber output on transmitter

LC single-mode fiber input, dual SDI outputs on receiver

Supports metadata and 16-channel embedded audio

Signal re-clocking

Compact, USB-powered form

Related Questions and Answers

Q: 1. Does it support key+fill output from vmix linking two SDI outputs?

A: vMix only supports Key/Fill output on Blackmagic capture cards; the AVMATRIX VC41 1080p 3G-SDI PCIe 4-Channel Capture Card would not be supported. Supported cards are listed here: https://bhpho.to/482JxD3.

Q: 2. Does this unit output on both HDMI and SDI simultaneously, while having a HDMI input?

A: Yes, the AVMATRIX SC2030 3G-SDI/HDMI Scaling Cross Converter will simultaneously output on both HDMI, and SDI when using the HDMI input.

Q: 3. Can these be left in permanent setups for long periods without power cycling? Other converters have given us issues.

A: The current information provided on the AVMATRIX SC2030 3G-SDI/HDMI Scaling Cross Converter should allow the product to be left in a permanent setup.

Q: 4. How do you input and configure tally into the unit? I don't seem to see a gpi unit anywhere so is it TSL?

A: The AVMATRIX 16-Channel 3G-SDI Multiviewer and Switcher (1 RU) does not have tally light support.

Q: 5. Will this box make it possible for BlackMagic Design ATEM inputs to be consistent and usable?

A: This does scaling from HDMI/AV to SDI. You may be facing an issue that requires Frame Rate Conversion as well and for that we recommend the Decimator MD-HX Miniature HDMI/SDI Cross Converter with Scaling & Frame Rate Conversion, B&H # DEDDHX.https://bhpho.to/2fDbJBb

Q: 6. Are the Multiview outputs independent or provide the same output? Can SDI 1 display different layout as SDI 2 & HDMI?

A: The SDI and HDMI outputs of the AVMATRIX 16-Channel 3G-SDI Multiviewer and Switcher (1 RU) indicate that they would all output the same Multiview image.

Q: 7. Cna you control this via Companion?

A: It is out understand that the AVMATRIX 8 x 8 3G-SDI Matrix Switcher can be remotely controlled via ip and software.

Q: 8. Is a stream key needed, or does this unit act as a webcam with the USB out? Thanks.

A: No stream key is needed for the AVMATRIX Shark S4 4-Channel 3G-SDI/HDMI Video Switcher to send a video signal through its USB output.

Q: 9. When in "switcher" mode, what does the multiview output do? Is it possible to use this as an SDI router while also having a 10 input multiview?

A: When in switcher mode you would not have access to the Multiview output of the AVMATRIX 16-Channel 3G-SDI Multiviewer and Switcher. It would not be used as a multiviewer if you are using it in switcher mode.

Q: 10. Does this come with a power supply?

A: No, but the AVMATRIX SC2030 3G-SDI/HDMI Scaling Cross Converter can be powered via the Micro USB port.