Trigger your camera from up to 328' away by picking up the RF Transmitter & Receiver from Pluto. Using a 2.4 GHz frequency and four channels, users can easily set up an interference-free remote triggering setup with their Pluto Trigger and camera. This model is designed for Nikon cameras and offers a max sync speed of 1/200 second. Additionally, the transmitter features a PC sync input and the receiver offers a 2.5mm sync port for setting up elaborate shoots with multiple flashes and cameras if so desired. Each device runs on two easily-found AAA batteries and this set comes with a 2.5mm to 3.5mm sync cable and a 3.5mm to 6.5mm adapter.

Transmitter and Receiver Set    Frequency: 2.4 GHz    Range: 328'    4 Channels    Max Sync Speed: 1/200 Second    Transmitter Features PC Sync Port    Receiver Features 2.5mm Sync Port    Each Device Runs on 2 AAA Batteries    2.5mm to 3.5mm Sync Cable    3.5mm to 6.5mm Adapter

Related Questions and Answers

Q: 1. Will the remote fire a continuous burst when triggered via the laser? Or triggered via the button with the accessory IR transceiver?

A: The Pluto has a Burst mode. It is not very good in that the camera may not respond quickly enough to get the burst you want. That being said what there is a way if you only need 2 seconds and your camera has a burst mode. In the settings you can set the Pluto software to a Slow triggering camera which is equivalent to holding down the shutter. Settings are 0, 150ms, 1s, & 2s. If you set it to 2 seconds you will get a 2 second burst at whatever rate your camera is capable of doing. My Canon 7Dmk2 shot 16 exposures in that time using this function.

Q: 2. Is this compatible with a Nikon Z5?

A: Yes this Pluto Trigger Kit is compatible with the Nikon Z5.

Q: 3. Is the only way to program this device is with a smart phone?

A: It has the ability to function as either a simple infrared remote or it can connect to a smartphone over Bluetooth 4.0 LE for programming and setup of advanced modes. Since it only operates as a simple IR remote without a smartphone, it would be strongly recommended that you get a smartphone too.

Q: 4. I'm trying to figure out which Pluto trigger kit to get for my D7000. Can anyone help?

A: If you go to the Pluto trigger site and look at the cable compatibility chart. It will tell you which cable to get with the trigger. The way B&H has them listed is the trigger with each cable independently.

Q: 5. Can I use it with a Nikon D3400 as a camera trap

A: Unfortunately, the D3400 lacks a remote shutter connection, which is required in order to use this remote set up.

Q: 6. Can it be utilized outside in inclement weather conditions? If so, Please provide the MTTFF and MTBF?

A: No, the Thor Satellite L-Band RF over Fiber Transmitter and Receiver Kit is not waterproof. This unit would need to be mounted in NEME4 waterproof enclosure. Also, the failure rate is very low, it is about 1 % in 2 years of operation.

Q: 7. Will this work with a Canon eos 4000d and a voking III FLASH?

A: Due to the lack of a center pin in the hot shoe of certain Canon cameras (e.g. 4000D, T100, SL3, and T7, among others), the Pluto RF Transmitter & Receiver for Canon Cameras (B&H# PLRFTRCAN) will not receive the sync signal from the camera to trigger a flash on (in the hot shoe of the transmitter) or off (in the hot shoe of the receiver) of the camera. If an economy-priced option is desired then we recommend the Godox X2 2.4 GHz TTL Wireless Flash Trigger for Canon (B&H# GOX2TC) for mounting in the hot shoe of any of the aforementioned cameras or any other Canon camera with a pre-2022 hot shoe, or even in those of the most modern version of the Canon hot shoe on a camera such as the Canon EOS R50 with the Canon AD-E1 Multi-Function Shoe Adapter (B&H# CAOCSAADE1). The Godox X1R-C TTL Wireless Flash Receiver for Canon (B&H# GOX1RC) would be added to receive the signal off camera.

Q: 8. The Pluto Trigger website shows my Nikon D500 needs the DC0 Cable, Is this 10 Pin Cable the DC0 cable Pluto says I need for my Nikon D500 ?

A: D500 uses the same connector as D800E which I have. It should work fine. However, it won't work for my second body D750.

Q: 9. Is this device compatible with Nikon Z6 camera?

A: yes it is

Q: 10. does the work with 470ex ai bounce flash?

A: Yes this will work with the 470 EX flash.