Transform your graphic prints into dry-erase boards with Drytac's 51" x 50' roll of 3.0-mil, clear PET WipeErase Clear Gloss Laminating Film. The durable film is resistant to graffiti, chemicals, solvents, water, stains, scratches, and abrasions. It also features a UV hard coat with a clear, glossy surface that safeguards against ghosting. Additionally, the film has a pressure-sensitive acrylic adhesive for bonding to a substrate.

Popular and recommended applications for the WipeErase laminate include planning or scheduling boards, calendars, notepads, menus, conference room walls, courtroom graphic displays, signage, and maps. You can make distinct, customized dry-erase wall decals by putting WipeErase over graphics that have been printed on Drytac's ReTac Wall. These decals are great for offices, schools, hospitals, dorm rooms, children's rooms, and kitchens.

Turns Graphic Print into Dry-Erase Board    Clear PET, UV Hard Coat, Glossy Surface    Pressure-Sensitive Acrylic Adhesive    Chemical/Solvent/Scratch-Resistant

Related Questions and Answers

Q: 1. I need the cards I'm laminating to be readable on both the front and backside. Will these pouches work for that?

A: These are single sided pouches, so only the front would be visible.

Q: 2. Is there a replacement for 3M™ 568 Positionable Mounting Adhesive that doesn't require heat?

A: Unfortunately, B&H does not carry the 3M™ 568 Positionable Mounting Adhesive, and we do not have an option that would allow you to reposition the placement of your item multiple times before adhesion, especially an option that does not require heat. The Drytac MultiTac Pressure-Sensitive Mounting Adhesive (22.5" x 150', Clear Roll) listed above does not require heat for adhesion, but it is also not repositionable once you place the item on the mounting adhesive.

Q: 3. Will this work with a standard Scotch laminator on a 5 mil setting?

A: In general the Dry Lam 9 x 11.5" Gloss Laminating Pouch (5.0 mil, 50 Pack) should work in most brands of laminators. But, you should makes sure the one you have does work with that specific material. Best is to contact the manufacture of the laminator.

Q: 4. Can this cut to 130mm Width?

A: This is 635mm wide. It can be cut smaller with the right tools, but unfortunately B&H does not provide that service.

Q: 5. is this heat activated?

A: Yes, the Drytac MultiTac Pressure-Sensitive Mounting Adhesive is heat activated and a tacking iron is needed. Please review the following item D&K Tacking Iron - Selector III BH #DKTIS3 • MFR #SE-2280 https://bhpho.to/3tQ6RQW

Q: 6. Is the adhesive permanent? That is, will it reactivate on a 2nd heating if I need to do multiple bite tacking for a large sheet?

A: Drytac Trimount Heat-Activated Permanent Dry Mounting Tissue (25.5" x 150' Roll) does not have a release layer which would allow for semi-permanent mounting.,

Q: 7. Can this be used for canon TA30?

A: Yes, the Inkpress Media Clear Adhesive Film Roll (17"x75') can be used with the Canon imagePROGRAF TA-30 Large Format Printer.

Q: 8. Is this product archival?

A: The manufacturer does not indicate that the Drytac MultiTac Pressure-Sensitive Mounting Adhesive (41" x 150' Roll, 1 mil, Clear) is archival. They do state that when all layers are compatible, the bond will not deteriorate and will last for many years, but it depends on how well all the assembled layers "like" each other. The Drytac MultiTac Pressure-Sensitive Mounting Adhesive (41" x 150' Roll, 1 mil, Clear) has an adhesive pH of 6. MTAC adhesive is used in both short term and long-term applications, where a high tack adhesive is required. The acrylic-based adhesive used in this build is non-yellowing and stable with excellent aging when properly applied to compatible surfaces.

Q: 9. will this work with a gbc ultima 65 ?

A: School-Lam Laminating Film is compatible with the GBC Ultima 65, which is designed to be used with NAP/School Film.

Q: 10. How do you use it?

A: You would just need to remove the adhesive film and apply it to your medium.