The 2L-2910 is a twisted pair cable, engineered for optimum signal transmission at resolutions up to 4K, including digital and analog data, audio, and video applications. The cable supports sweep frequency up to 400 MHz and has been verified to meet performance requirements set by the HDBaseT Alliance. The 2L-2910 supports long-distance connections while safeguarding transmission quality. The outer metal layer and the braid protect signal transmissions from electromagnetic interference and reduce the impact, caused by electrical noise. The 2L-2910 utilizes SF/UTP design with four unshielded 23 AWG twisted pair conductors. Among the four unshielded twisted pair conductors, there is one cross filler to reduce cross talk. Most importantly, the cable meets the requirements set by ANSI/TIA-568-C.2 (2009), ensuring high performance in electrical transmission.

• Optimized for multiple distributions, including HD video, audio, Ethernet, power and control
• Verified to meet performance requirements set by HDBaseT Alliance
• Supports sweep frequency up to 400 MHz
• Supports up to 4K data transmission
• 23 AWG bare copper conductor

Related Questions and Answers

Q: 1. We need to run new cable for this installation (remote camera). Will this work with Cat7 cable?

A: It is rated for Cat6/6a only. They will not support Cat 7 specifications

Q: 2. How long can I run the USB3.1 cable to this camera?

A: The USB cable that comes with the camera is 6 feet. You can extend that further with a high quality extender like the ATEN USB 3.1 Gen1 Extender Cable - 32.8' (BH #ATUE3310) but signal degradation may start to occur over some longer runs.

Q: 3. Is there any latency between this camera and other cameras connected to the computer via USB?

A: This will offer very little latency.

Q: 4. Is this green as the picture shows? Is it available in other colors?

A: The cable is green as shown, with this type of cabling we only have it in this color.

Q: 5. Can this system work in cascade , using the HDMI output of the transmitter to feed another transmitter. If so, how many times without a lost of quality?

A: Unfortunately, the EXT-HD60M cannot be cascaded.

Q: 6. Can this be used as an HDMI DA with the transmitter alone and does it need power in this case?

A: This is a kit which comes with both a Transmitter and Receiver, which need to be used together.

Q: 7. Is there anyway to record audio with this device ?

A: There are currently no audio recording options defined by manufacturer.

Q: 8. Is this compatible with the Vaddio ProductionVIEW HD-SDI MV CAM?

A: Yes it is. The Roboshot 12E is compatible with the Vaddio ProductionVIEW HD-SDI MV CAM.

Q: 9. Does the receiver support POE? If I were to put a POE injector on the Ethernet coming out of the transmitter.

A: The KanexPro HDMI Full HD Extender over Cat6 (196') does not support PoE as a power option.

Q: 10. Would it be useful to put a camcorder at a distance?

A: We've had issues with distance on this model and had to switch to a different brand. The Kanex Pro 1x4 distribution model works great in our facilities, but this 1x1 has not worked well in a couple of different use cases.