The Chrosziel 15mm Swing-Away Arm Assembly enables faster lens changes by conveniently moving the matte box out of the way of the lens. In addition to providing swing-away functionality, the assembly has joints which allow you to tilt the matte box as well as slide it horizontally and vertically when fitting it to your lens, compensating for possible inconsistencies found in complex rigging scenarios.

150mm Diameter Clamp Adapter    Swing-Away Arm for 15mm Rod    French Flag    3 x Filter Holders: 5.65x5.65"/4x5.650"    Pivot Mechanism    Set of Side Wings    Set of Rosettes for Handles    Accessory Bar with Adjustable Slider    Filter Tray Catcher    FlexiBellows

Related Questions and Answers

Q: 1. Can it fit on DSLR's?

A: Hi JoseIt depends on the lens / sensor combination you chose to use. My configuration works just fine; Sigma 17-50 2.8 zoom on Canon 60D (APC sensor) Wider lenses will produce vignetting. Beware that the weight of the Mattebox can stress the lens if it is not sturdy enough - consider buying railmount? (zoom lenses often protrude when in use)

Q: 2. Can this be adjusted up and down from the rails to centre the lens?

A: No, The Chrosziel MB 450W Super Wide Matte Box 15mm rod mount does not offer height adjustment. The Mattebox uses the worldwide industry standard for Rod mounting.

Q: 3. Will this hold 4mm thick filters?

A: Yes it should. This should hold any 4x4" or 4x5.65" filter.

Q: 4. May I use this matte box with the Zunow WCX-80 wide angle lens on a Sony FDR AX-100 camera with no vignetting? Thanks

A: This combination is unknown and the answer would only come from testing the components together. Having said that, we feel that the camera with its lens at the widest mm setting plus wearing the Zunow most likely will cause vignetting with the matte box. The vignetting should go away if you zoom in slightly.

Q: 5. I'd like to use this hood on a wide angle converter lens (16x9 Inc. 169-HDWC8X-72 EXII 0.8x Wide Angle Converter) with the Sony FDR AX-100 camera. The hood web site says it can work with a bit wider lenses. The outside diameter of the converter lens is 98mm (with a filter size of 105mm - I don't understand but those are the numbers I keep getting?). I prefer to not use rails for this small camera. Thanks

A: The rear clamp for this matte box is 85mm and cannot accommodate 105mm or 98mm. As far as not using rails, such a small camera cannot accommodate such large conversion lenses and matte boxes without them.

Q: 6. I have a bmpcc and Veydra lenses. They are 77mm. Will this matte box work with those?

A: The Veydra has a 77mm lens diameter or a 80mm diameter with the hood. Since the Cavision matte box can accommodate 50mm-80mm diameters with the inculded flexibel Donut Ring, you are good to go.

Q: 7. Is there no way to close all the way? Ie fold in the sides and fold down the eyebrow?

A: When using the LanParte MB-02 matte box you would lower the top flag with the side flags on or remove the side flags. The Side flags fold to allow you to lower the top flag.

Q: 8. Is there a 80mm to 114mm ring for this mattebox?

A: There is no 80mm to 114mm ring for the SHAPE Swing-Away Matte Box.

Q: 9. Will this mattebox support third party filter trays? Specifically a rota pola 4x5.65?

A: Yes, the SHAPE Swing-Away Matte Box should work with other brands of 4 x 5.6" Filter Frames, and the Rota Pola.

Q: 10. Would 2mm or 3mm filters fit in the metal trays?

A: Yes, the maximum thickness that can fit is 4mm.