The Black Box 1x4 DVI-D Splitter with Audio & HDCP distributes a DVI signal simultaneously to up to four DVI displays, in resolutions up to 1920 x 1200 and 1080p HDTV. It supports input/output cable lengths up to 16.4 ft, and can be cascaded two levels deep with additional Black Box DVI splitters with audio and HDCP (1x2, 1x4, 1x8).

Beside each DVI port is a 3.5mm stereo audio jack for passing independent audio, useful for digital signage applications where you may benefit from audio communication. The splitter is fully HDCP compliant for compatibility with all Blu-ray players, cable boxes, and other devices. .

Distributes DVI Signal to 4 Displays    Supports Up to 1920 x 1200 and 1080p    3.5mm Stereo Jacks for Separate Audio    Supports Cable Lengths up to 16.4 ft    Supports Cascading Two Levels Deep    HDCP Compliant    Compatible with EDID-Capable Screens    Switches to Power-Save upon Signal Loss    19" Rack-Mountable (Kit Not Included)

• Distributes a DVI signal to up to four DVI displays
• Supports resolutions up to 1920 x 1200 and 1080p HDTV
• Supports input/output cable lengths up to 16.4 ft
• 3.5mm stereo audio jacks for separate audio
• HDCP compliant
• Can be cascaded two levels deep with additional DVI splitters with audio and HDCP
• Compatible with EDID-capable screens
• Power/Status dual-color LED indicator; output LED indicators
• Automatically switches to power-save mode if the input signal is lost
• No software required; plug-and-play installation

Related Questions and Answers

Q: 1. Does this splitter work for both t.v and projectors?

A: I have only used it for projectors but I don't see why not...keep in mind it's 1080 res not WUXGA

Q: 2. Can you cascade these units to reach more monitors?

A: YES, CAN BE USED IN CASCADE TO ACHIEVE MORE MONITORS

Q: 3. Didn't see this in the questions already: Would this splitter work well if the source cable is 75ft and includes a booster in the line? The lines going out from the splitter would be approx. 30 ft.

A: KanexPro 4K HDMI 1x2 Splitter is only as good as its source. If you have a quality HDMI cable input or a HT Base connection, it will work well. It can distribute up to 50' away.

Q: 4. How does one update the firmware on these devices?

A: Firmware is installed via the front USB connection. At this current time there are no firmware updates available for the KanexPro 1x4 HDMI Splitter BH #KASPHD1X44K.

Q: 5. Will this product create a new HDMI source?

A: This product takes in a single HDMI signal and turns it in to two HDMI signals.

Q: 6. Do the 3.5mm jacks output audio from the HDMI input signal, or are they independent from the HDMI input and require their own 3.5mm input?

A: If you input HDMI only, the HDMI and 3.5mm audio out is from the audio embedded in the HDMI. If you input 3.5mm audio, that overrides the HDMI audio and 3.5mm out.

Q: 7. Does this work for HDMI cable that is 100ft long?

A: We would not recommend this product for a cable run that is in excess of 50 feet.

Q: 8. Does it have an screw holes at the back?

A: There are no mounting points on the Watson Pro D-Tap 1x4 Splitter Cable.

Q: 9. Will it cause damage to keep this powered on 24/7/365? We have it installed in our employee training room (auditorium).

A: The KanexPro 1×4 HDMI Splitter is a low-voltage item and should not heat up or cause issues, so it should be able to operate 24/7/365. However, I would recommend keeping a spare on hand.

Q: 10. Looking for a replacement Power Supply- KanexPro 1x2 HDMI Splitter.. Ideas?

A: You can use the Watson Pro 12V 2A Power Supply (2.1mm) with the KanexPro 1x2 HDMI Splitter.