You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Fotodiox Wonderpana Freearc Xl Core Unit Kit For Sigma 12-24mm Art Lens With 186mm Slim, Solid Neutral Density 1.2 And 7.9 X 10.2" Hard-edge Graduated Neutral Density 0.6 Filters

Fotodiox Wonderpana Freearc Xl Core Unit Kit For Sigma 12-24mm Art Lens With 186mm Slim, Solid Neutral Density 1.2 And 7.9 X 10.2" Hard-edge Graduated Neutral Density 0.6 Filters
  • Product Code: ga48706
  • Availability: In Stock

$1,643.31 $2,612.86

The FotodioX WonderPana 8.0" Holder Bracket is a two-piece assembly designed to be used in combination with a FotodioX WonderPana FreeArc XL Core Unit or a WonderPana XL Aluminum Step-Up Ring. Attaching the WonderPana 8.0" Holder Bracket to a WonderPana FreeArc XL Core Unit or a WonderPana XL Aluminum Step-Up Ring can allow for the convenient use of two 2.0mm-thick filters measuring 7.9" wide, or one 2.0mm-thick filter measuring 7.9" wide along with one FotodioX 186mm round filter behind it.


Use of this holder bracket is easily accomplished by separately attaching its two assembly pieces to opposite sides of a WonderPana FreeArc XL Core Unit or a WonderPana XL Aluminum Step-Up Ring using six of the eight included brass short-screws. Pre-tapped threaded inserts along the edge of a WonderPana XL Aluminum Step-Up Ring accommodate those screws and ensure correct positioning of the two assembly pieces so that they are positioned parallel to each other and can hold a 7.9"-wide filter between them. The combined WonderPana XL Aluminum Step-Up Ring, and WonderPana 8.0" Holder Bracket can then be attached to a compatible lens.


For WonderPana FreeArc XL Core Units that consist of a rear lens collar and a front filter holder, pre-tapped threaded inserts along the edge of the front filter holder accommodate six of the eight brass short-screws for correct positioning of the WonderPana 8.0" Holder Bracket's two assembly pieces. Once the holder bracket and a front filter holder are combined, and the separate collar has been slid over the rear of a compatible lens until it has achieved a secure fit, the front filter holder with the attached holder bracket can be screwed onto the front of the installed rear lens collar.


After being fitted onto a compatible lens, the bearing design of the WonderPana FreeArc XL Core Unit allows a WonderPana 8.0" Holder Bracket to be rotated 360°. This permits the use of graduated neutral density and other filters that are enhanced by varied positioning.


The FotodioX WonderPana 8.0" Holder Bracket provides two pairs of filter slots, a configuration that accommodates two compatible rectangular filters. For each rectangular filter that is placed within one of the holder bracket's slots, its position is secured by integrated guides within each slot. These guides apply pressure along both sides of a filter that is sufficient to hold it in place, but permits movement of that filter. This can complement the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot.

The WonderPana 8.0" Holder Bracket features a lightweight, aluminum-alloy construction that has a corrosion-resistant, black anodized finish for durability. A rigid pouch is included for storage and transport.

For Sigma 12-24mm f/4 DG HSM Art    WonderPana FreeArc XL Core, Lens Cap    WonderPana 8.0" Holder Bracket    186mm Solid Neutral Density 1.2 Filter    16x Filter Factor, 4-Stop    Darkens Entire Image    7.9 x 10.2" Graduated ND 0.6 Filter    Up to 4x Filter Factor, 2-Stop    Reduce Exposure in Selective Areas    Hard-Edged Line of Transition

Parameters
MaterialAluminum alloy
CompatibilityAdapter Ring:
WonderPana FreeArc XL Core Unit
WonderPana XL Aluminum Step-Up Ring

Filters:
Accepts up to two 7.9" rectangular filters (200.7 mm wide, 2.0 mm thick); or up to one 7.9" rectangular filter (200.7 mm wide, 2.0 mm thick) and one round FotodioX 186 mm filter
RotatingWhen installed on a WonderPana FreeArc XL Core Unit: Yes, 360°
When installed on a WonderPana XL Aluminum Step-Up Ring: No
DimensionsArea occupied from edge-to-edge when installed on a WonderPana FreeArc XL Core Unit or WonderPana XL Aluminum Step-Up Ring: 8.7 x 1.6" (22.0 x 4.0 cm)
Weight8.6 oz (243.8 g)
Packaging Info
Package Weight0.64 lb
Box Dimensions (LxWxH)6.7 x 4.65 x 2.45"

  • When used with a FotodioX WonderPana FreeArc XL Core Unit or a WonderPana XL Aluminum Step-Up Ring, allows for the convenient use of two filters measuring 7.9" wide, or one filter measuring 7.9" wide along with one FotodioX 186mm round filter installed on a WonderPana FreeArc XL Core Unit or WonderPana XL Aluminum Step-Up Ring
  • Provides two pairs of filter slots, a configuration that accommodates up to two 2.0mm-thick rectangular filters
  • Allows up to two compatible rectangular filters to be rotated 360° when used with a FotodioX WonderPana FreeArc XL Core Unit
  • Integrated guides within each filter slot apply pressure along both sides of a filter that is sufficient to hold it in place, but permits movement of that filter, complementing the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot
  • Lightweight, aluminum-alloy construction with a corrosion-resistant, black anodized finish for durability
  • Microfiber cleaning cloth included, plus a rigid pouch for storage and transport

Related Questions and Answers

Q: 1. Will this work on the new Sigma 12-24 Art?

A: It works well with the 11-24 canon so I can only assume that it will work with that lens. n Needs to be kept spotlessly clean so as to avoid flare abboration

Q: 2. does the canon version works with the new sony 12-24mm lens?

A: No, it only works with the Canon 11-24mm.

Q: 3. Does the filter holder or filters physically block any of the field of view of sigma 14-24 mm dg hsm f mount lense? Not dg "dn"

A: No, the FotodioX WonderPana FreeArc XL Core Unit Kit for Sigma 14-24mm Art Lens with 8.0" Holder Bracket would not physically block any of the field of view on a Sigma 14-24mm Art lens.

Q: 4. 1) is there any 77mm filter? 2) is this made in China?

A: They do make a 77mm filter by Vu however it is a 2-stop (VUVSND277) unfortunately. And the item is made in China.

Q: 5. Can I stack both filters and will it cause vignetting?

A: Yes, it will but only at very wide apertures

Q: 6. Does the filter holder or filters physically block any of the field of view of sigma 14-24 mm dg hsm f mount lense? Not dg dn

A: FotodioX WonderPana FreeArc XL Core Unit Kit for Sigma 14-24mm Art Lens with 8.0" Holder Bracket does not block any of the filed of view, also the filters don't block it either.

Q: 7. Hello, Can I stack the filters with each other? For example, black promist 1/4 + Polarizing. Thank you

A: Yes, you can stack them.

Q: 8. Do I need to buy another lens ring to fix this filter? This adapter is immediately attached to the lens or you need to buy something else? What is included with this filter?

A: What you see is in the photos is all you need if you want to use the polarizer. In the Box: FotodioX 186mm Slim Circular Polarizer Filter Filter Pouch Limited 2-Year Warranty FotodioX 186mm Center-Pinch Snap-On Lens Cap for Select WonderPana Systems & Filters Limited 2-Year Warranty WonderPana FreeArc XL Core Unit for Sigma 14-24mm f/2.8 DG HSM Art Lens Limited 2-Year Warranty If you want to use the square or rectangular filters, then you will need the brackets. Click on the link below to view; https://bhpho.to/32VgMWY

Q: 9. How is this installed?

A: You can use gaff tape https://bhpho.to/3353R3h.

Q: 10. I need to use a clear or haze filter. Is it possible to utilize more than one filter at a time-a polarizer and an ND filter?

A: You cannot stack a uv filter on top of the Slim Circular Polarizer Filter included with the FotodioX WonderPana FreeArc XL Core Unit Kit for Sigma 14-24mm Art Lens with 186mm Slim Circular Polarizer Filter. Fotodiox 186mm filters are not designed with a front threads.

29/08/2024

I’ve used Tiffen and still do for their Black Pro Mist and Black Satin filters but man. These are a whole other level. It’s like upgrading to an Aston Martin from a BMW.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Magmod Reflector Xl

$224.85 $308.04

Magmod Xl Essentials Pack

$104.85 $135.26

Google Pixel Buds Gen 1 (clearly White)

$357.00 $506.94

Fotodiox Wonderpana 8.0" Holder Bracket

$299.85 $458.77

Products You May Like

Tiffen 6.6 X 6.6" Satin 1/8 Filter

$1,947.00 $2,492.16

Tovatec Li-ion 26650-a Battery

$66.00 $85.14

Verkada Large Arm Mount

$477.00 $696.42

Ikan Hoverfly Lightweight Shoulder Rig

$447.00 $545.34

Weldex 17" Sun Readable Open-frame Monitor

$2,173.50 $2,803.82

Tiffen 4.5" Round Gold Diffusion/fx 1 Filter

$716.85 $1,082.44

Proaim Aluminum Camera Line Slider (4')

$591.00 $744.66