You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Fotodiox Wonderpana Freearc Core Unit Kit For Sigma 20mm Art Lens With 6.6 X 8.5" Soft-edge Graduated Neutral Density 0.9 And 145mm Circular Polarizer Filters

Fotodiox Wonderpana Freearc Core Unit Kit For Sigma 20mm Art Lens With 6.6 X 8.5" Soft-edge Graduated Neutral Density 0.9 And 145mm Circular Polarizer Filters
  • Product Code: ga48762
  • Availability: In Stock

$1,262.49 $1,742.24

The FotodioX WonderPana 6.6" Holder Bracket is a two-piece assembly designed to be used in combination with a FotodioX WonderPana FreeArc Core Unit, a WonderPana 145 Core Unit, or a WonderPana FreeArc Aluminum Step-Up Ring. A WonderPana Core Unit or a WonderPana FreeArc Aluminum Step-Up Ring with the WonderPana 6.6" Holder Bracket attached can then allow for the convenient use of two 2.5 to 4.0mm-thick filters measuring 6.6" wide, or one 2.5 to 4.0mm-thick filter measuring 6.6" wide along with one FotodioX 145mm round filter behind it.

Use of this holder bracket is easily accomplished by separately attaching its two assembly pieces to opposite sides of a WonderPana Core Unit or a WonderPana FreeArc Aluminum Step-Up Ring using the six included brass short-screws. Pre-tapped threaded inserts along the edge of a WonderPana Core Unit or FreeArc Aluminum Step-Up Ring accommodate those screws and ensure correct positioning of the two assembly pieces so that they are positioned parallel to each other and can hold a 6.6"-wide filter between them. The combined WonderPana Core Unit, or WonderPana FreeArc Aluminum Step-Up Ring, and WonderPana 6.6" Holder Bracket can then be attached to a compatible lens.

For WonderPana Core Units that consist of a rear lens collar and a front filter holder, pre-tapped threaded inserts along the edge of the front filter holder accommodate the six brass short-screws for correct positioning of the WonderPana 6.6" Holder Bracket's two assembly pieces. Once the holder bracket and a front filter holder are combined, and the separate collar has been slid over the rear of a compatible lens until it has achieved a secure fit, the front filter holder with the attached holder bracket can be screwed onto the front of the installed rear lens collar.

After being fitted onto a compatible lens, the bearing design of the WonderPana FreeArc Core Units and WonderPana FreeArc Aluminum Step-Up Rings allows a WonderPana 6.6" Holder Bracket to be rotated 360°. This permits the use of graduated neutral density and other filters that are enhanced by varied positioning. While a WonderPana 145 Core Unit does not include a 360° rotating mechanism, eight pre-tapped threaded inserts all around its edge allows the WonderPana 6.6" Holder Bracket to be installed in 45° increments so that rectangular filters placed within it can be angled to the best approximate position relative to the subject in front of the camera.

The FotodioX WonderPana 6.6" Holder Bracket provides two pairs of filter slots, a configuration that accommodates two compatible rectangular filters. For each rectangular filter that is placed within one of the holder bracket's slots, its position can be secured using the included brass long-screws. Pre-tapped threaded inserts along the outside of the holder bracket allow the long-screws to each apply pressure to a spring-loaded retainer within each filter slot. When a pair of the long-screws are used, the level of grip upon a rectangular filter can be varied, which can complement the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot.

Each FotodioX WonderPana Core Unit or WonderPana FreeArc Aluminum Step-Up Ring includes front filter threads, which allow a FotodioX 145mm round filter to be used along with this filter holder. If a 145mm round filter is used on the attached WonderPana Core Unit or WonderPana FreeArc Aluminum Step-Up Ring, the rectangular filter slot closest to the rear of the holder bracket becomes unavailable. The WonderPana 6.6" Holder Bracket features a lightweight, aluminum-alloy construction that has a corrosion-resistant, black anodized finish for durability. A rigid pouch is included for storage and transport.

For Sigma 20mm f/1.4 DG HSM Art    WonderPana FreeArc Core Unit, Lens Cap    WonderPana 6.6" Holder Bracket    6.6 x 8.5" Graduated ND 0.9 Filter    Soft-Edged Line of Transition    Up to 8x Filter Factor, 3-Stop    Reduce Exposure in Selective Areas    145mm Circular Polarizer Filter    1.25 to 8x Filter Factor, +0.3 to 3-Stop    Helps to Eliminate Reflections and Glare

Parameters
Filter Capacity2x 6.6 x 8.5", 168 x 216 mm, Wonderpana 66 (2.5 to 4 mm Thick)
or
1x 6.6 x 8.5", 168 x 216 mm, Wonderpana 66 (2.5 to 4 mm Thick) and
1x Round 145 mm
MaterialAluminum
Dimensions7.3 x 0.8" / 18.5 x 2 cm
Weight5.6 oz / 158.8 g
Packaging Info
Package Weight0.665 lb
Box Dimensions (LxWxH)6.7 x 4.75 x 2.4"

  • When used with a FotodioX WonderPana FreeArc Core Unit, a WonderPana 145 Core Unit, or a WonderPana FreeArc Aluminum Step-Up Ring, allows for the convenient use of two filters measuring 6.6" wide, or one filter measuring 6.6" wide along with one FotodioX 145mm round filter installed on a Core Unit or FreeArc Aluminum Step-Up Ring
  • Provides two pairs of filter slots, a configuration that accommodates up to two 2.5 to 4.0mm-thick rectangular filters
  • Allows up to two compatible rectangular filters to be rotated 360° when used with a FotodioX WonderPana FreeArc Core Unit or WonderPana FreeArc Aluminum Step-Up Ring
  • When used with a WonderPana 145 Core Unit, allows up to two compatible rectangular filters to be installed in 45° increments so that a filter placed within it can be angled to the best approximate position relative to the subject in front of the camera
  • Ability to vary grip on each installed rectangular filter to complement the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot
  • Lightweight, aluminum-alloy construction with a corrosion-resistant, black anodized finish for durability
  • Rigid pouch included for storage and transport

Related Questions and Answers

Q: 1. Will this also fit the new f2.8 version of the 12-24?

A: No, this is for the f/4 version of the Sony 12-24mm zoom lens only.

Q: 2. does this fit olympus 60 mm macro lens?

A: The filter threads on the Olympus M.Zuiko Digital ED 60mm f/2.8 Macro Lens are 46mm. Therefore the Vivitar 46mm UV, Circular Polarizer, and Solid Neutral Density 0.9 Three-Piece Filter Kit will fit perfectly.

Q: 3. does the canon version works with the new sony 12-24mm lens?

A: No, it only works with the Canon 11-24mm.

Q: 4. I need to use a clear or haze filter. Is it possible to utilize more than one filter at a time-a polarizer and an ND filter?

A: You cannot stack a uv filter on top of the Slim Circular Polarizer Filter included with the FotodioX WonderPana FreeArc XL Core Unit Kit for Sigma 14-24mm Art Lens with 186mm Slim Circular Polarizer Filter. Fotodiox 186mm filters are not designed with a front threads.

Q: 5. This filters works in 16-50 samsung nx500 lenses?

A: Yes, these filters will fit the 16-50mm.

Q: 6. Can I stack both filters and will it cause vignetting?

A: Yes, it will but only at very wide apertures

Q: 7. Is there ANY vignetting in the corners when using this filter holder for the Sigma 14-24/f2.8 ART?

A: Hi--it is likely that there is very slight vignetting using this filter holder at 14mm on that lens.

Q: 8. Does the filter holder or filters physically block any of the field of view of sigma 14-24 mm dg hsm f mount lense? Not dg "dn"

A: No, the FotodioX WonderPana FreeArc XL Core Unit Kit for Sigma 14-24mm Art Lens with 8.0" Holder Bracket would not physically block any of the field of view on a Sigma 14-24mm Art lens.

Q: 9. Does the filter holder or filters block any of the field of view of sigma 14-24 mm dg hsm f mount lense?

A: The FotodioX WonderPana FreeArc XL Core Unit Kit for Sigma 14-24mm Art Lens with 8.0" Holder Bracket does not vignette on the Sigma 14-24mm f/2.8 DG DN Art Lens.

Q: 10. Does the filter holder or filters physically block any of the field of view of sigma 14-24 mm dg hsm f mount lense? Not dg dn

A: FotodioX WonderPana FreeArc XL Core Unit Kit for Sigma 14-24mm Art Lens with 8.0" Holder Bracket does not block any of the filed of view, also the filters don't block it either.

29/07/2024

Opening the box for this lens left me speechless, it's an absolute beauty to behold and the build quality is fantastic and luxurious. L lenses are nice but I find this nicer. The image quality amazing on my 70D. I particularly love the colours that this lens puts out, they seem more true to the colours of your subject than other lenses. Non photographers usually marvel the camera but now all they notice is this lens. Great job Sigma! I don't have any photos with me at the moment but I will be adding some when I get the chance.

5
27/05/2024

Sharpness from 1.4 ... Fantastic!

5
13/05/2024

the image is really nice, even with aperture wide open. sharp as hell from edge to edge. focus is quick,precise and quiet. color is pleasant. 20mm is just right wide angle, one step away from exaggerate and still wide enough. i'm also so obsessed with the bokeh by f1.4. down side is, it's really heavy. whole body made ofbrass, and all kinds of premium glasses, I know Sigma is really trying everything he can do to make it perfect, but it's really a heavy one for me to think twice when I pack (990g)

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Wagan Jumpboost V10 Air

$382.50 $604.35

Tiffen 127mm 80a Color Conversion Filter

$1,669.50 $2,621.11

Products You May Like