The black Cable Techniques 3.5mm TRS Locking Connector is an audio connector designed to be attached to a cable for use with lavalier microphones and wireless mic transmitters in theaters, conferences, and concert venues. It features a screw-locking collar and gold contacts. It is compatible with devices that have 3.5mm TRS locking jacks, including Sennheiser G3/G4 and 2000 Series units. The connector is compliant with cable diameters up to 6mm.

For Sennheiser G3/G4 and 2000 Series    Works with 3.5mm Locking Jacks    Gold Contacts    Screw-Locking Collar    Accepts Cable Diameters up to 6mm

• For use with Sennheiser G3/G4 and 2000 Series microphones and cables
• Works with devices with 3.5mm locking jacks
• Gold contacts
• Screw-locking collar prevents accidental disconnect
• Accepts cable diameters up to 6mm

Related Questions and Answers

Q: 1. Is this cable compatible with Sony UWP-D receiver? They have a different wiring inside than Sennheiser g3) but the connector is the same.

A: Yes the Cable Techniques Mini TRS to XLR Male Low-Profile Wireless Output Cable (18") is compatible with Sony UWP receivers.

Q: 2. Is this also compatible with Sennheiser G4 receivers?

A: The Cable Techniques Right-Angle Locking 3.5mm TRS to Low-Profile TA3M Coiled Cable (8 to 15") would not be recommended for use with Sennheiser receivers. The Sennheiser CL 35-XLR Right-Angle Locking 3.5mm TRS to XLR Male Coiled Output Cable (BH #SE700062 ) should be used instead.

Q: 3. Would there be any issue with using this to connect a Sennheiser G4 receiver to the input of Blackmagic Pocket 4K?

A: The Blackmagic Pocket 4K is not compatible with the Cable Techniques Mini TRS to TA3F Low-Profile Wireless Line Input Cable (18").

Q: 4. This says wired for Sennheiser. Shouldn't this be compatible with any and all outputs? I have a Sony UWP (URX-P41D) receiver.

A: Sennheiser and Sony use the same locking mechanisms, but the internal wiring is different. So, the Cable Techniques Right-Angle Locking 3.5mm TRS to 3.5mm TRS Coiled Cable for Sennheiser should not be used with the Sony URX-P41D Wireless Receiver.

Q: 5. Can I use this cable to connect my Sony UWP RX to the TA3 connection of the Mixpre-10 II?

A: No, you would instead use BH #CAMINLPUOX18 for connecting your Sony receiver into one of the XLR mic inputs on the Sound Devices MixPre-10 II.

Q: 6. Any idea why this does not work with my Tentacle Track E? Works perfectly with Sennheiser G4.

A: The Cable Techniques 3.5mm TRS to 3-Pin XLRF Unbalanced Cable may not be working with your Track E recorder because of what you are trying to connect. For instance, the Tentacle track E cannot be used with a line-level audio source.

Q: 7. Would these work on the Sony UWP range?

A: No this 3.5mm locking pin connector was designed for Sennheiser systems

Q: 8. Are these balanced cables wired the same as Sennheiser 500 balanced cable, going to Sound Devices?

A: Yes, the Cable Techniques Right-Angle Locking 3.5mm TRS to Low-Profile XLR Male Cables for Sony URX-P41D are essentially the same as the Sennheiser CL-500 Balanced Cable for Use with Sennheiser EK500 Receiver 1/8"-Male Mini Jack to XLR-Male Connector (B&H # SECL500), with the same wiring configuration.

Q: 9. Would these connectors work on the Sony UWP range?

A: Yes, this connector is compatible for use with Sony UWP wireless components that require a 3.5mm TRS locking connector..

Q: 10. Do you know if it's a Rean connector that's being used for that connector model ?

A: Cable Techniques has not specified any particular brand for the connector used in the construction of this model.