Mount your Canon EOS C200 camera on a shoulder rig, tripod, or other rig and add accessories with this Baseplate from SHAPE. The system features a baseplate with 15mm LWS rod clamps, a camera plate, and two aluminum 15mm rods that measure 12" in length.

The baseplate features three 1/4"-20 screws to securely mount your camera, as well as multiple 1/4"-20 and 3/8"-16 mounting thread options. The baseplate features 1/4"-20 and 3/8"-16 tripod mounting threads on the bottom. The standard 15mm LWS rod clamps secure the included 15mm rods with locking levers, allowing you to add accessories such as a follow focus, matte box, and more.

Attaches underneath the camera via 1/4"-20 screws, and the camera adapter plate features 3/8"-16 and 1/4"-20 threads

Mount on a tripod or rig with 3/8"-16 and 1/4"-20 threads

The 15mm rod clamps on the baseplate secure two 12" long 15mm aluminum rods

The 15mm LWS design is designed to respect the C200 optical center

Four rubber pads at the top of the base protect and securely hold your C200 camera

Allen wrench attaches to the bottom of the baseplate via a magnet

Related Questions and Answers

Q: 1. Will this work with the c300iii? I already have the Shape Arms and only want to swap out the handles with the grip remote, like the option previously offered with the mark i and ii.

A: It will not as this is specifically for the C200.

Q: 2. What do I need to use this either with a C100 mark II or a 5d mark IV?

A: Hello JimThank you for your question! For the C100 Mark ii, you do not need anything else than this rig. The main baseplate of this shoulder mount was specifically designed for the Canon C series cameras (C100-C300-C500). So it should fit fine. As for the 5D Mark IV, if the optical center is not an issue, it should be ok, if it is, you can still use it but adding accessories like a mattebox might be a bit tricky.For more detailed info, please call us at 1.888.968.9810We hope this answers your questions and we thank you for your interest in our products.The SHAPE team

Q: 3. Will this rig work with a C100 AND a C300 Mark ii?

A: Hello Julia,Thank you for your question! The baseplate in this rig was not designed for the C100 and C300 MKii. It was designed to fit the C300 mark i. It can work, but won't be ideal and might not respect the optical center of those cameras. For instance, the C300 mark ii is a bigger camera, so if you want to add a mattebox, it might not be centered. At that point, we cannot guarantee it will fit perfectly. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 4. Will this work with the C300mk2?

A: Hello Chris, Thank you for reaching out to us! The grip relocator you will need for the C300 MkII is actually this one: https://www.shapewlb.com/en/product/brands/canon-camera-supports/canon-eos-c100-c300-c500/canon-c-series-grip-relocator_898.aspx?id_page_parent=1287. This unit includes the aluminum bracket which needs to be inserted in our Push Button, part of our handles, and the male-female cable to plug into the camera. We hope this helps and we thank you for your interest in our products. The SHAPE team.

Q: 5. What's the main difference between this and the Shape Offset Rig?

A: The difference between this product and the Offset Version, which is B&H # SHC100OF, is the Offset configuration itself. The Standard Version has 2 longer 15mm rods that go straight from the handles to the shoulder pad. The offset rig has two shorter sets of 15mm rods and an offset bracket. Some prefer the offset design because it puts the camera directly in front of your eyes for use.https://bhpho.to/2b1Xcio

Q: 6. Do you need to buy an extension cable for the monitor?

A: No, you won't need an extension cable for the monitor. The cable provided with C200 is plenty long enough to work with this cage system.

Q: 7. Do you need a counterbalance if you're not using a battery brick?

A: That will depend on how you set up the C200 and if that set up makes the rig front heavy. Here is a 1.8 pound counter balance from Lanparte that attaches through 15mm rods. https://bhpho.to/36XEv9W

Q: 8. Is this plate identical to the bottom plate that is included in the full cage by Shape for the c200?

A: Hi Jason, yes this is the same plate that we use for the C200 cage.

Q: 9. I'm looking for a rig that has a quick and easy transition during events from handheld mode to tripod. Would you recommend this?

A: You can screw a plate to the bottom of the baseplate. So, if you are willing to leave the baseplate on and rails then it would be fast.

Q: 10. Can I relocate the remote handle to the handles on the shoulder mount?

A: Hello! Thank you for your question! You can indeed remove the rubber handle on the unit and insert the C300 bracket designed to attach the remote handle of the camera.We hope this helps and we thank you for your interest in our products.The SHAPE team