Designed for creating strong objects that require a high impact tolerance, the natural milky 1.75mm ABS-X Filament from CraftUnique uses "Zero Warp" technology to create a filament with less cracking and improved interlayers that adheres well to glass, tape, and other adhesive print beds. All of these factors help to create a material with enhanced mechanical properties that is stronger than traditional ABS filament with fewer issues, such as warping and poor bed adhesion. This filament is compatible with 3D printers that utilize 1.75mm diameter filament.

1.75mm ABS-X Filament    Natural Milky Color    Zero Warp Technology    Improved Interlayers    Reliable Bed Adhesion    Enhanced Mechanical Properties    Improved Strength & Aesthetics

"Zero Warp" technology

Improved interlayer adhesion

Reliable bed adhesion for glass, tape, and other adhesives

Enhanced mechanical properties over regular ABS

Improved strength & aesthetics

Related Questions and Answers

Q: 1. What height would the 6 stand be at its lowest possible height?

A: Around 32 to the top of the light, but the soft box adds around 8 when situated horizontally. Vertically, or using the octagonal soft box on it would add more.

Q: 2. Can this be used on the Adventurer 3?

A: Yes, the FlashForge 1.75mm Creator Series ABS Filament (2.2 lb, Red) is compatible with the Adventurer 3.

Q: 3. What is the shipping size and weight of this kit?

A: The kit is approximately 14 lbs total. The size of the actually shipping box varies according to what the warehouse has at the time and what they feel is best to protect the items.The light stands are the longest part of the kit and the stands when closed are about 27 inches long. So the box will be at least that long.

Q: 4. Will this work with Hikvision DS-2CD2185FWD-IS dome camera?

A: https://www.bhphotovideo.com/c/product/1162129-REG/hikvision_ab110_inclined_ceiling_mount.html is the correct mount.

Q: 5. Will this work with the Da Vinci Pro 1.0?

A: No, unfortunately this would be filament for an XYZ 3D printer.

Q: 6. If you decide to switch to using LED bulbs will it be possible to use them in this kit?

A: Both the the Impact 4 Socket Fluorescent Fixture, B&H # IMFFS4, and the Impact FF-OF4 Octa 4-Socket Fluorescent Fixture, B&H # IMFFOF4, in the Impact Soft n' Natural Kit #3 listed above will accept Edison-base LED bulbs as long as the ballast on the base of the bulb has enough clearance for the bulbs to fully screw into the light socket. Fluorescent and LED lamps may be used in these fixtures, but tungsten/incandescent lamps CANNOT be used in these light fixtures.

Q: 7. Will this work with the da Vinci mini w + ???

A: It will not. The compatible filament will be BH #XYRFPLCXS0QB.

Q: 8. Do you know the dimensions of the package (length,width, height)?

A: The box I received was 27 L x 14 1/2 W x 11 3/4 H

Q: 9. Is This Filament 3mm or 2.85mm?

A: 3mm Filament Diameter

Q: 10. What is the shore hardness? And can a printed part stretch?

A: The TPU Shore hardness is 94A, the printed model can be stretched, but it depends on the actual situation.