The HDMI 2.0 Scaler with HDMI/DisplayPort/VGA Input from Link Bridge is a multi-format HDMI 2.0 scaler with HDCP 2.2 compliance. It supports HDMI and DisplayPort video resolutions up to 3840 x 2160 at 60 Hz and 4096 x 2160 at 60 Hz with 4:4:4 YUV. The scaler automatically selects and displays the most recently connected source. It allows you to adjust the video's contrast, brightness, hue, and saturation.

Analog audio output with volume control

Supports audio mute

EDID management functionality

Multiple user interfaces (Front panel, OSD, WebGUI, RS-232, Telnet, and IR remote)

Related Questions and Answers

Q: 1. Will this work to connect a Microsoft Surface Pro 6 to a LG UltraWide 29” screen to fit the 21:9 aspect ratio? Thx —

A: Yes, the Microsoft Surface Mini DisplayPort To HDMI 2.0 Adapter BH #MIEJT00001 will allow you to use an ultrawide display at up to 3840 x 2160 (3440 x 1440 in the case of 21:9.

Q: 2. Can I get the equipment delivered with British or European plugs?

A: This adapter does not contain any power plugs. This would go directly into the Mini Displayport port on the Surface.

Q: 3. Will this scale 1080p HDMI in to 720p component out? Will it extract HDMI audio to DD 5.1 bitstream through the coax out? Thanks.

A: Yes it can scale 1080p HDMI in to 720p/60 out, video goes out both the Composite and Component video ports at the same time, in fact if you just press the 720p/60 button on the bottom of the remote then everything will be done. Audio is also extracted and will go out both the S/PDIF audio port and L & R RCA audio jacks, it samples audio at 48 KHz.

Q: 4. How long is the cable?

A: This would be a 6'.

Q: 5. Lumantek Youtube video mentions using batteries. Does anyone make a small battery bracket that would work well with this device?

A: Unfortunately we do not carry any battery brackets for the Lumantek SDI to HDMI Converter with Display and Scaler at this time.

Q: 6. How many channels of audio does this support?

A: SHV+ supports "8 Channels for SDI Embedded Audio" and "2 channels for Ext. Audio out".

Q: 7. What image parameters can the user adjust? e.g. Horizontal or vertical size, or horizontal of vertical phase?

A: You can adjust the Horizontal and Vertical Mirror, Horizontal and Vertical Shift, Phase, Under/Over Scan and Aspect Ratio with this converter.

Q: 8. Does this converter support 740X400 70Hz input resolution?

A: Input resolutions are defined as up to 1920 x 1200 (WUXGA) and 1080p60. No low end input is defined, only the max.

Q: 9. Does this auto-switch based on active inputs?

A: It does not. This is not an Auto Switch.

Q: 10. What size is the berrol connector for the DC power in? I know its 5-18 volts with center positive. But what is the spec on the jack/plug size?

A: Outer diameter is 5.5 mm and inner diameter is 2.1 mm