The Smart-UPS SRT3000XLW-IEC Battery Backup & Surge Protector from APC is a high-performance, uninterruptible power supply (UPS) that helps to provide protection for electronic equipment in the event of utility power blackouts, brownouts, sags, surges, small utility power fluctuations, and large disturbances. It also provides battery backup power for connected equipment until utility power returns to acceptable levels or the batteries are completely discharged. The unit is controlled using a multi-function LCD status and control console.

Without any additional extended run options connected, the Smart-UPS SRT3000XLW-IEC can provide up to 72.9 minutes of runtime at 275W and up to 4 minutes of use when running a full load of 2700W. If you need longer runtimes, up to 10 external battery packs can be connected using two IEC jumpers, providing a maximum runtime of 2097.7 minutes at 275W, which decreases to 193.8 minutes when running a full load of 2700W.

APC's SRT3000XLW-IEC provides an output power capacity of 2700W / 3000VA, an output voltage of 208, 220, 230, or 240 VAC at 50/60 Hz ±3 Hz, six IEC 320 C13 battery backup outlets, two IEC 320 C19 battery backup outlets, an input voltage of 208, 220, 230, or 240 VAC at 40-70 Hz, and can accommodate British BS1363A, IEC-320 C20, and Schuko CEE 7/EU1-16P input connections using its three 8' power cords. It has a surge energy rating of 340 joules and its sealed lead-acid battery is maintenance-free, has suspended electrolytes, and can be recharged in around 3 hours. Included is a USB cable, a RS-232 signaling cable, and removable support feet. Protection is provided by a limited 3-year repair or replace warranty for the main unit and a limited 2-year battery warranty.

Output: 2700W / 3000 VA    Input: 208-240 VAC @ 40-70 Hz    6 x IEC 320 C13 Battery Backup Outlets    2 x IEC 320 C19 Battery Backup Outlets    2 x IEC Jumpers    1 x AC Input Outlet & 3 x Input Cords    LCD Status & Control Console    340-Joule Surge Energy Rating    Recharge Time: up to 3 Hours    Double Conversion Online Topology

Related Questions and Answers

Q: 1. Is the software that comes with this UPS fully compatible with OS X (Yosemite at least)?

A: There is no need to install software for the UPS when connecting to a Mac. You will be able to use the Macs Energy System Preference pane to control your systems responses when on battery power.

Q: 2. I just bought this and realized it came with a 30amp AC Plug. Can I safely adapt this to 15amp plug to use in a regular outlet? Will it just result in a slower battery charge?

A: Thank you for your interest in our products. If you do change the input power cord to 15 amp it will derate the UPS to a 1500VA UPS. It wouldn't slow charge but you would not be able to connect the same amount equipment to the UPS. We do recommend a licensed electrician change out the cord as well. For more information on this please check out the following knowledge base. https://www.apc.com/us/en/faqs/FA156517/

Q: 3. Where can I see the backup duration this battery provides for the capacity listed?

A: Thank you for your interest in our products. You can check the runtime of the UPS by going to Status Estimated Runtime on the LCD display.

Q: 4. Smart Card Compatibility: Is model fully compabile with: APC UPS Network Management Card 3 with 2 USB Ports and Temperature Monitoring, Newest Model 2020 (AP9641) ??

A: Thank you for your interest in our products. Yes the AP9641 will work in the SMT3000C.

Q: 5. Is this unit compatible with the APC Smart Card "AP9641" - 2020 version of network card?

A: No it is not compatible.

Q: 6. Will the SmartConnect feature function after the warranty has expired?

A: Yes, it will still function. The SmartConnect feature of the APC Smart-UPS C Battery Backup & Surge Protector with SmartConnect is built into the UPS itself and is not limited by the duration of the warranty.

Q: 7. I want to hook up to survillence system to keep powered up when losing utility power. I assume this will do the trick?

A: Absolutely will be fine.Most surveillance systems draw very little power, and the near perfect sine-wave output is great for video equipment that would otherwise be susceptible to electronic noise (ie. spurious lines in the video, etc). However, this unit can only keep your surveillance system running for a limited amount of time, and you can determine the amount of time by visiting the APC website and using their UPS sizing tool to help determine about how much time your system will stay powered.And a sidenote... if you are using a PC-based system to record the surveillance data, then the amount of time will be substantially reduced due to the extra power needs of PC itself, so make sure that you include the wattage of the power supply in the PC when determining your power needs.If this 1440VA (about 1050watts) will only keep your PC-based surveillance system powered for about 10-mins, then you might want to consider a larger UPS unit, or one that can accept additional battery packs to extend the power timespan.

Q: 8. are batteries replaceable?

A: Yes, the battery is replaceable.

Q: 9. Will this work on 15 amp?

A: Thank you for your inquiry. This would have a NEMA 5-20P plug on it. If you change the plug to a 15 amp plug then you would derating the UPS. You wouldn't get the full capacity out of the UPS and it would be rated for around 1,500VA. I apologize for any inconvenience this causes.

Q: 10. What is the battery connector on the back of the UPS for?

A: The port on the back marked battery is actually a disconnect, not a connector. It is recommended that you disconnect the battery during transportation, and this port provide a convenient way to do so.