Use the FTR1U from Chief to mount your flat panel display (up to 32"). This sturdy tilting wall mount will allow you to mount your display only 2" from the wall. The FTR1U utilizes the Q-Latch mounting system for quick installations and can be used horizontally or vertically.

To confirm compatibility of this mount with your flat panel TV or monitor, visit Chief's Mount Finder Pro

Q-Latch Mounting System    Fingertip Tilt Adjustment

Integrated security

Q-Latch Mounting

Can be used vertically or horizontally

Supports select VESA patterns

50 x 50mm, 75 x 75mm, 100 x 100mm, 200 x 100mm, 200 x 200mm

Related Questions and Answers

Q: 1. Is the plate able to be removed from the wall mount so that the screen attached can easily be removed? I occasionally like to upgrade my ram and need to pull the computer off of the mount to do this.

A: Gabor FSM-S Full-Swing Small Wall Mount for 20 to 45" Displays BH #GAFSMS is easily disassembled via the included "M" series machine screws. But the monitor mounting plate is not a quick-release type.

Q: 2. What's the height of the vertical piece that attaches to the wall?

A: The wall bracket on the Gabor FSM-S Full-Swing Small Wall Mount for 20 to 45" Flat-Panel Displays (B&H # GAFSMS) is about 10" in height.

Q: 3. Can this be extended away from the wall to provide easy access to cable connections?

A: Yes: 2.95" Minimum Mounting Depth Each mounting bracket can be extended independently to allow for access to either side of the rear of your display for easy cable hookups.

Q: 4. would this work with metal studs?

A: The Gabor FSM-S Full-Swing Small Wall Mount for 20 to 45" Flat-Panel Displays BH #GAFSMS has been designed specifically for mounting directly on wooden studs or concrete walls. The supplied mounting hardware is not intended for use on metal studs.

Q: 5. Does this work for all monitors within its size?

A: The Gabor FSM-S Full-Swing Small Wall Mount for 20 to 45" Displays BH #GAFSMS is compatible with monitors/televisions that are 20 to 45",up to 77 lb and feature 75 x 75 to 200 x 200mm VESA mount spacing.

Q: 6. Can I use this wall mount for LG model 60UN7000PUB?

A: The Gabor Tilting Wall Mount for 42 to 90" Displays BH #GATMPX offers the following: Supported Screen Sizes: 42 to 90" / 106.7 to 228.6 cm Weight Capacity: Wood Stud, Concrete: 154 lb / 69.9 kg Metal Stud: 110 lb / 49.9 kg VESA Mounting-Hole Pattern: 200 x 200 to 700 x 400 mm The LG 60UN7000PUB has a 300 x 300 mm VESA wall mounting hole pattern and weighs in at just about 43 lbs. These products are compatible.

Q: 7. What is the distance between the wall and the vesa mount when fully retracted?

A: The Gabor FSM-S Full-Swing Small Wall Mount for 20 to 45" Displays BH #GAFSMS would have a minimum wll clearance of about 1.8 inches.

Q: 8. will this mount work with the TCL 5-Series S535 50" Class HDR 4K UHD Smart QLED TV BH #TC50S535 ?

A: Yes. The Gabor FSM-M Full-Swing Medium Wall Mount for 25 to 55" Displays BH #GAFSMM will work with the TCL 5-Series S535 50" Class HDR 4K UHD Smart QLED TV BH #TC50S535

Q: 9. Will you be able to see the mount sticking out behind a 32 inch tv?

A: The Gabor TM-SM Tilting Wall Mount for 30 to 50" Flat-Panel Displays BH #GATMSM will not be visible with a 32" television/monitor.

Q: 10. Is there a template for mounting

A: NO! Completely unnecessary! Figure the center of where you want the tv, left,right and up,down and mark it with a pencil. Before removing uprights spread them out to max and that is the most they can be mounted apart from each other on the wall. I would subtract an inch to avoid problems. Ideally you want to mount them 22-26 inches apart at the same height. It is all dictated by where your studs are located. Just dont mount to close together, less than 16 inches apart you best keep it centered all the time. Remove the uprights from the crossbars. You can use the same upright to mark both sets of holes. Your template. Use hardware capable of bearing the load(250lbs). If they are mounted at different heights as long as not to much. Half inch or so. There are screws at the top of each to level the bars perfectly. This is probably the BEST TV stand for sale anywhere! GOOD LUCK!!!