Appliances That Use Dc Power

Ubiquiti Networks Rps-dc-100w Dc/dc Power Module

Product Code: ga50143
Availability: In Stock

$267.00 $400.50

Qty

7 reviews Write a review

Description
Reviews (7)

Designed for use with the GPON Optical Line Terminal, the RPS-DC-100W DC/DC Power Module from Ubiquiti Networks can be inserted into the secondary power bay as a backup power source.

Compatible w/ GPON Optical Line Terminal Backup Power Module

Parameters
Power Type	DC to DC
Packaging Info
Package Weight	1.6 lb
Box Dimensions (LxWxH)	10 x 4.8 x 2.1"

The second power bay of the GPON Optical Line Terminal can house a backup power module. If the UF-OLT detects failure of the primary power module, the backup module automatically activates to supply uninterrupted power.

Both power bays can also house a DC/DC power module for use with DC power.

Related Questions and Answers

Q: 1. Does this work for the Ninja Inferno as well?

A: This is not compatible with the Inferno. It would just be compatible with the Blackmagic Video Assist and the Shogun Monitor.

Q: 2. When you install the DC2 how do you get the original battery door off to put on the new one with the cable hole?

A: There is a small pin on the bottom of the unit that when it is pushed in the door comes right off.

Q: 3. Does this have a battery?

A: No, this unit does not have a battery back up.

Q: 4. Does this work for the receiver component too?

A: How can i eliminate the buzz noise ? A lot of forum talk about it but no answer...

Q: 5. Would the Ronin S be able to power the Shogun Inferno with this cable?

A: No because the shogun inferno has a 2.1 mm DC barrel

Q: 6. Does this unit work with the G4 series transmitters as well?

A: I verified with the manufacture and yes it does work with the Sennheiser G4 transmitter series

Q: 7. I'm looking for a replacement to the DC power cable that came with my C100. Will this connect to the canon charger? How long is the cable? Thanks!

A: Sorry, no. The ends must be the same to work with the Canon CA-930 Compact Power Adapter and these are not. However, the OEM cable is available. Canon DC-930 DC Cable B&H # CADC930 (-----Copy and Paste this number to the B&H website search box and click Go. ) Or see below.

Q: 8. Would this be able to power a SmallHD monitor (or similar 5" inch monitor?)

A: We are not aware of this cable being able to power a SmallHD Monitor with the Ronin-S.

Q: 9. Will this work with the Feelworld LUT6s?

A: No, this cable will not work. However, this cable should work: https://www.bhphotovideo.com/c/product/1411731-REG/watson_ps_12v2a_21_12v_2a_power_supply.html?sts=pi&pim=Y

Q: 10. what is the length of this cable?

A: The cable is approximately 10".

Donald	28/08/2024
This will help us to not need to replace batteries all the time 5

Brent	09/07/2024
Using IEM receivers at remote battery powered speakers. Using old USB cable, i was able to cut the cable and wire it to this and now I can obtain power for my sennheiser ew receivers to run off my speakers battery. The DC2 accepts a range of voltage and converts it to 3V and this simply works flawlessly! This is wonderful and if I want to switch to AA's or rechargeable I can easily swap this out for those. thanks sennheiser 5

anyonymous	28/06/2024
We use this battery adapter with a 14v system via D-Tap plug. The DC adapter drops the 14v down to 3v. We use the power from a Steadicam Flyer sled to power this power adapter which then powers wireless Sennheiser receiver. Very easy to use and one could add pretty much any type of power connection that ranged 14v-8v (I believe) down to 3v to this adapter. Be blessed, Frederick Marbelle 5

Jason P	19/05/2024
I use this along with the Sennheiser Nt 2-3-Us Power Supply to convert a battery powered source to a AC power source. My uses for these two products are for setting up wireless speaker systems using body pack style transmitters and receivers to send a wireless signal from my audio mixer to the speakers without using (or needing) speaker cables. You will never again have to use batteries (for the transmitters and receivers) when you incorporate The DC 2 - DC Camera Power Converter and the Nt 2-3-Us Power Supply to send the signal. After 15 years of running speaker cables, taping down on walkways and over door ways, this investment was WELL worth it! I run my speakers wirelessly now with ease and convenience! 5

Christopher S.	12/05/2024
This is the third one I bought. One is powered from a P-Tap connection on my camera rig and the other two take their power from my Audio Devices BDS in my sound bag. Makes my life so much easier and AA free ;) 5

Homebum	07/05/2024
I have been using this with a Sennheiser g3 receiver and a Remote Audio BDSv4. I didnt buy the additional pigtail connecting cable as i had some unused ones from tbe BDS kit. I just soldered that to the battery packleads and all is well. 5

Ian	04/04/2024
Great but expensive solution for DC powering Senny wireless systems. Used on my camera to power directly from the AB battery/Titan charger. 5