Utilizing expertise in over IP KVM solutions, KE8952 are IP-based HDMI KVM extenders that allow access to a computer system from a remote USB console to anywhere over an intranet. The KE8952 KVM over IP Extenders support one HDMI monitor at each end, providing a greatly improved video display image with 4K x 2K video resolution (up to 3840 x 2160). KE8952 also support 1Gbps SFP fiber module expansions, enabling connections via fiber optic network to extend distances in transmission. Furthermore, the KE8952 features Power over Ethernet (PoE) function, the power can be supplied through a PoE Network Switch; therefore, eliminating the need for a power adapter and effectively reducing the power configuration cost.
The 4K HDMI KVM over IP Extender consists of a Transmitter unit that connects to the computer and a Receiver unit that provides console access from a separate location. The computer is accessed from the remote console over a standard TCP/IP network via Cat 5e/6 cable that allows point-to-point, point-to-multipoint, multipoint-topoint, and multipoint-to-multipoint administration. KE8952 can be connected either directly to each other or via a high-speed network, over a copper-based or fiber-based LAN.
Implementing the KE Matrix Management Software (CCKM) with KE8952, IT administrators receive advanced features functioning as auto detection of all KE Series Extenders on the same subnet for the sake of fast installation or configuration, username/password authentication and authorization, and the ability to define different types of connections that can be switched and shared. Security features also provide extra protection, supporting AES encryption for secured data transmissions, while RADIUS, LDAP, AD or remote user authentication provides an added layer of connection security; moreover, with an OSD, RS-232 support, and Auto MDIX, the KE series is the most cost-effective and convenient way to get a full digital extension from anywhere on the intranet.

• Ultra High Definition (UHD) video quality - up to 3840 x 2160 @ 30 Hz (4:4:4); 36-bit color depth
• Support interlaced video (1080i)
• Support standard HDMI resolutions from 640 x 480 up to 3840 x 2160 @ 30 Hz
• Support stereo speakers and stereo microphone
• USB Virtual Media Support
• Auto-MDIX - automatically detects cable type
• Built-in 8 kV/15 kV ESD protection and 1 kV surge protection
• Fanless design for silent operations that are energy efficient
• Hot pluggable
• Upgradeable firmware

Related Questions and Answers

Q: 1. Can you run 2 seperate transmitters on the same network?

A: Any number of transmitters and receivers can be installed on a network.

Q: 2. What is the proper signal receiver for this transmitter?

A: The Ocean Matrix 4K HDMI over HDBaseT 2.0 USB KVM Receiver with Two-Way IR, RS-232, CEC & PoC would be a good pick. See: https://www.bhphotovideo.com/c/product/1585354-REG/ocean_matrix_omx_01hmbt0003_r_4k_hdmi_over_hdbaset.html

Q: 3. How many meters will it work with cat5e cables, in 1080 and 4k?

A: The KanexPro 4K HDMI Extender Kit supports both CAT5e and CAT6a cables. When using CAT5 or 6 cables for 1080p or 4K signals, the distance from transmitter to receiver would be 40 meters or 131 feet.

Q: 4. What is the latency of the conversion?

A: Users have reported a latency between 150-200ms.

Q: 5. Does it support 1920x1200?

A: Yes. The following unit supports the following format and compressions. Video Format HDMI Input (4:4:4 YUV) UHD 4K: 60 fps 1080p: 60 fps 1080i: 60 fps 720p: 60 fps 576p: 60 fps PAL: 60 fps 480p: 60 fps NTSC: 60 fps PC Resolutions HDMI: 1280 x 960 HDMI: 1280 x 800 HDMI: 1280 x 768 HDMI: 1680 x 1050 HDMI: 1360 x 768 HDMI: 1600 x 900 HDMI: 1024 x 768 HDMI: 800 x 600

Q: 6. Does this come with one power supply or two?

A: Yes, the Evolution 4K HDMI Extender comes with a 12 VDC power supply.

Q: 7. what is the maximum distance for 1080p on CAT6?

A: When using a HDMI extender like the Vanco Evolution 4K HDMI Extender the maximum distance we would recommend sending the signal over Cat6 is 100m or 328ft.

Q: 8. Does this device only pair with the transmitter or can you link this device to decode any ip stream like an h264 from a camera.

A: If you are looking to send Video over a LAN/WAN network we recommend NDI encoders and decoders. The Ocean Matrix OMX-HDMI-2-IP has multiple setup solutions listed here. All of the setups are Transmitter to Receiver. Configuration - https://bit.ly/3BOLgeO

Q: 9. I have a Dahua NVR with 8 camera support. I have one Ethernet cable running to a corner of my house where I want to put two cameras. Can I use this to split the ethernet cable to two cameras?

A: Yes; this was the exact use case I used it for as well. You just need to ensure your POE power supply is large enough to support both of the cameras.

Q: 10. Since it supports 4K HDR, I assume Dolby Vision will work as well? Ordered it for delivery Dec. 1

A: Yes, Dolby Vision will work.