Equipped with tally and talk-back functionalities, the Ghost-Eye Wireless 800TC ENG Video Receiver with a V-mount battery plate from CINEGEARS is suitable for receiving uncompressed, 1080p60, 10-bit, 4:2:2 video up to 2625' away.

The 800TC ENG receiver is cross-compatible with any Ghost-Eye 800TC transmitter. Whether in a point-to-point or point-to-multipoint configuration, your HDMI or SDI signal is carried with a low-latency rate of less than 1 ms over the license-free 5 GHz frequency band. The set is also capable of HDMI/SDI cross conversion via its HDMI and SDI ports.

Small obstacles in the line of sight are compensated for by an adaptive signal logarithm keeping your signal connected. For safety, signals dropped due to interference or loss of line of sight are automatically relinked within 1 ms of the obstacle being removed. Other features of the receiver are the optional AES-128 signal encryption and timecode support.

The tally light on the 800TC ENG receiver indicates when the camera is on the air, while the talkback feature on the transmitter end allows the camera operator to give heads up to the director. Combined with a video splitter, the 800TC ENG receiver can be used to trigger the record function on an external recorder. The transmitter features a V-mount battery plate attached on the back.

Receive Uncompressed 1080p60 Video    2625' Line of Sight Range    HDMI and SDI Output, SDI Loop Output    Auto-Relink, Low Latency of <1 ms    Uses License-Free 5 GHz Frequency Band    Supports Encrypted Ghost-Eye Transmitter    Tally and Talkback Support    Adaptive Small Obstacle LOS Compensation    Optional AES-128 Signal Encryption    V-Mount Battery Plate

• Receive wireless HD video and audio up to 2625'
• Supports resolution up to 1920 x 1080 at 60 fps 
• HDMI/SDI cross conversion with SDI loop-out
• Supports timecode
• Supports Start/Stop functionality
• Low latency at <1 ms
• Four transmission channels to an unlimited number of Ghost-Eye receivers
• Compatible with 800TC Ghost-Eye transmitter
• Optional AES-128 encryption
• Auto-relink once transmitter is back within range
• V-mount battery plate

Related Questions and Answers

Q: 1. When utilizing the 3G-SDI and HDMI I/O and Cross Conversion is the audio feed brought over as well. EG: Can I output Video/Audio from my camera's SDI and watch/listen to it on my HDMI monitor?

A: Yes, the audio should travel as well when cross converting with this product.

Q: 2. Can this mount to the Movi Pro pop and lock system?

A: That is possible. The FREEFLY Pop-N-Lock Quick Release System, B&H # FR91000205, has both 1/4"-20 and 3/8" threads to attach accessories. You would just need to use something like a 1/4"-20 to 1/4"20 Spigot or articulating arm to connect this to the Pop-N-Lock. 1/4"-20 Spigot - https://bhpho.to/2jdVltE E-Image Mini Arm with 1/4"-20 Studs - https://bhpho.to/2WODQn7

Q: 3. Can this device pass full Ancillary Data? Particularly SDI Audio Channels 15&16, the channels used for Blackmagic's CCU data. I know some of these units either compress or strip down the audio channels if they're based on WHDMI chipsets.

A: I dont believe it passes the full ancillary data, not 100% on this. Worked on a set where they requested teradeks for this exact reason.

Q: 4. Which end connects to the camera, the transmitter or receiver?

A: With systems like this you Transmit the signal from the camera to a monitor that has a receiver on it. The Transmitter will go with the camera.

Q: 5. it says you can power the transmitter via dtap butcan you power the reciever with a d tap?

A: Yes, both tx and rx can be powered via p tap to 2 pin lemo cables.

Q: 6. Can this be used to pull focus?

A: This is a Wireless Video Transmission System, not a wireless follow focus. However you could use this product in conjunction with a wireless follow focus system to view the video.

Q: 7. Will this work with the atomos inferno. This is 3sdi atomos is 12sdi ?

A: Yes it will. The Atomos Inferno accepts signals up to 12G-SDI, it can accept a 3G-SDI signal as well.

Q: 8. Is this compatible with the Cinegears 150m Receiver?

A: No this is Not compatible with the Cinegears 150m Receiver

Q: 9. What's in the box?

A: The following is included with this kit: 600MP Transmitter 600MP Receiver 2 x 2-Pin LEMO to D-Tap Cables Articulating Arm 2 x Extended Range Antennas 2 x SDI Cables Waterproof Case Limited 3-Year Warranty

Q: 10. How noisy is the transmitter?

A: The noise produced by the CINEGEARS Ghost-Eye 600MP Wireless Transmitter is very low, if barely audible on a microphone.