The black Electro-Voice EVID-S10.1D is a 2x10” subwoofer designed to provide low-end reinforcement for system designers, installers, and audio engineers configuring systems for background and foreground music in stores, clubs, eateries, schools, and more. It is IP54-certified for weather-resistant use outdoors and includes weather port covers that can be installed for compliance with IP65 standards. Installation versatility is offered via integrated U-bracket mounting points and M8 safety and flying points.

Removable, locking 4-pin Euroblock connectors allow for compatibility with commercial amplifiers and speakers. The two 10” high-excursion woofers yield a frequency response of 33 to 500 Hz and a 120 dB maximum SPL. A rear-panel switch allows for mono or stereo operation.

Dual 10" High-Excursion Woofers    IP54-Certified for Weather Resistance    IP65 with Supplied Cover Installed    High Maximum SPL    33 to 500 Hz Frequency Response    Removable Locking Euroblock Connectors    Mono/Stereo Switch    Integrated U-Bracket Mounting Points    Built-In M8 Safety and Flying Points

Dual 10" high-excursion woofers yield a frequency response of 33 to 500 Hz

IP54-certified for enhanced weather resistance

Install supplied weather port covers for compliance with IP65 standards

1600W peak (400W continuous) power handling for 120 dB maximum SPL (126 dB peak)

Removable, locking 4-pin Euroblock connectors accept up to 12 AWG (2.5mm) wire size

Integrated U-bracket mounting points

Built-in M8 flying points and safety point

Logo can be replaced to match speaker orientation

Crossover and transformer input panels (available separately) may be installed for enhanced functionality with 8 Ohms or 70/100V systems

Related Questions and Answers

Q: 1. Where is the serial number located? thanks, blake

A: On the box.

Q: 2. Will this work with Shure PGA98H?

A: Yes, the Electro-Voice TXA - TA4-Male to XLR-Male Adapter is compatible for use with the Shure PGA98H-TQG Clip-On Cardioid Condenser Horn Mic with TA4F (B&H # SHPGA98HTQG). The TXA adapter will convert the TA4F plug to standard 3-pin XLR and allows you to use phantom power from mic input on the mixer, amplifier, or recorder to power the PGA98H microphone.

Q: 3. Is the mounting hardware included with these speakers?

A: Yes, these speakers come with 2 x SAM (Strong-Arm-Mount) Mounting Systems.

Q: 4. What is the Maxium distance from the unit to the input source in order for bluetooth to work well?

A: Bluetooth works best within 30 feet.

Q: 5. Hello. Why should I go with Neodymium Capsule instead of the normal one? Thanks

A: The RE 50 with a Neodymium capsule will add additional gain to the mic.

Q: 6. Is the plug a regular 3 pin XLR? Do you need extra modules? I already have phantom power.

A: Yes, the Electro-Voice RE-92L Miniature Cardioid Lavalier Condenser Microphone does have a standard size 3-pin XLR connector on the attached power module which allows it to be connected to a standard XLR mic input on a mixer, recorder, camera or amplifier that can supply phantom power.

Q: 7. Is this the entire unit? I am looking for just the array and pole. The listing appears to be for that, but the price listed is more in line with the cost of the array and subwoofer.

A: This the complete system with subwoofer. In the Box: Product Highlights For Portable, Wireless Sound Setups Eight 3.5" Neodymium Drivers Freq Response (with Sub): 43 Hz - 20 kHz Custom Waveguides for Wide Coverage Horizontal / Vertical Dispersion: 120° / 40° Powered by EVOLVE 50 Active Subwoofer 500W of Class-D Amplification Magnetically Locking Mounting Pole Pole Includes Wire Assembly Includes Carry Bag Electro-Voice EVOLVE 50 Portable PA Column Array (Black) Speaker Pole Carry Bag Limited 3-Year Warranty

Q: 8. This has the same connection as Shure wireless packs that I have. Would it be compatible with the Shure QLXD's?

A: Yes, the Electro-Voice RE-97TX Miniature Omnidirectional Headworn Microphone (TA4-F) will work with Shure QLXD transmitters with TA4 connections such as the QLXD1 beltpack.

Q: 9. I have a Zoom h4n recorder and I accidentally ordered Shure wireless CVL lavs. Is this what I need to convert them to wired? If so, any tips with settings?

A: Yes, the Electro-Voice TXA TA4-Male to XLR-Male Adapter can be used to connect the Shure CVL Lavalier Microphone to the XLR input on the Zoom H4n Pro Portable Handy Recorder. The TXA adapter will convert the mic's TA4-female plug to XLR 3-pin male and will also allow you to use phantom power from the H4n Pro to power the mic. The TXA adapter will convert phantom power to the appropriate amount of plug-in power required for the CVL to function properly.

Q: 10. Can I connect two Everse 8 Speakers together?

A: The Electro-Voice EVERSE 8 Weatherized Battery-Powered Loudspeaker with Bluetooth Audio and Control (Black), BH # ELEVERBB, may be linked with another Electro-Voice EVERSE 8 by first pairing one speaker to your streaming device, then selecting LINK SPEAKERS in the BLUETOOTH control menu on both loudspeakers. Be sure to download Electro-Voice's intuitive QuickSmart Mobile app. The QuickSmart Mobile app allows pairing and grouping of up to 6 speakers, in any combination, including EVERSE 8, ELX200 powered family, and the EVOLVE family.