You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Camvate 25mm Handlebar Monitor Mount For Dji Ronin-m (black & Red)

Camvate 25mm Handlebar Monitor Mount For Dji Ronin-m (black & Red)
  • Product Code: ga50782
  • Availability: In Stock

$93.60 $145.08

The CAMVATE 25mm Handlebar Monitor Mount for DJI Ronin-M, in black and red, can be attached to 25mm rods and poles, such as the handlebar of the DJI Ronin-M and select other gimbals. It provides a 1/4"-20 screw on top for mounting a monitor or other device or accessory weighing up to 3.3 lb. It consists of a tilt and swivel mount and a handlebar mount that offers a single 3/8"-16 and three 1/4"-20 mounting threads. The tilt and swivel mount screws into one of the 1/4"-20 threads and can be tilt-/swivel-adjusted on the top and bottom to set your monitor at the desired angle. Alternatively, various other accessories can be screwed into any of the four threads.

25mm Handlebar Mount    3.3 lb Weight Capacity    Adjustable Tilt and Swivel Positions    Threaded Holes for Alternate Accessories

Parameters
Load CapacityHandlebar Mount:
Not Specified by Manufacturer

Tilt & Swivel Mount:
3.3 lb / 1.5 kg
Material of ConstructionAluminum
Mount TypeHandlebar Mount:
24.9 to 25.5 mm Rod Mount
3 x 1/4"-20 Female
1 x 3/8"-16 Female

Tilt & Swivel Mount:
1/4"-20 Male on Top
1/4"-20 Male on Bottom
Weight4.2 oz / 118 g (Total)
Packaging Info
Package Weight0.2 lb
Box Dimensions (LxWxH)3.8 x 2.9 x 2"

Related Questions and Answers

Q: 1. Can I use Canon 5 mark v with 16-35 2.8 and rode mike?

A: Does anyone know when dji plans to release a focus motor or dual handle grip. has this been any mention of it?

Q: 2. I need to know if this handless works for ronin first generation?

A: The Ronin bars are 30mm. These handles fit the Ronin M bars which are 25mm.

Q: 3. is the (ronin s only ) kit equivalent to the standard pack on the dji website?? which includes all of the accessories such as the focus motor&wheel etcc..

A: Yes, this kit that we sell for the Ronin-S is identical to the Standard Kit that is sold on the DJI website.

Q: 4. is the bottom of the handle threaded so you can mount to a tripod?

A: Yes. The Ronin-S has a standard tripod mount to mount the included mini-tripod or mount to a standard tripod.

Q: 5. Will this work on the Tilta Basic Ring Grip Plus? If not, which clamp would fit?

A: The SmallRig 25mm Rod Clamp for DJI Ronin-M/Ronin-MX/FREEFLY MōVI is intended to be used as a mounting point for the DJI Ronin-M, Ronin-MX, and the FREEFLY MōVI. The SmallRig 25mm Rod Clamp for DJI Ronin-M/Ronin-MX/FREEFLY MōVI is not compatible with the Tilta Basic Ring Grip Plus for DJI Ronin (BH #TIGAPRG), which has a larger pipe diameter.

Q: 6. How would I mount a monitor to this clamp?

A: You can use any monitor mount or articulating arm that has a 1/4 20" or 3/8 16". Screw that end on the clamp and the other end on the monitor.

Q: 7. Does the Ronin App have a tracking and phone camera view option like the Zhiyun play app?

A: Currently the Ronin-S doesn't have Active Track technology like the Osmo Mobile 2 or other DJI drones. However, in future firmware and software updates there will always be new features added.

Q: 8. what is the diameter of the base? I want to buy a handle and it goes from 20-44mm

A: Though the handle is not a perfect circle so referring to a diameter doesn't quite apply, but the diameter of the round side is about 1.2in and it is about 2in in depth.

Q: 9. Is Ronin-S compatible with Eva1?

A: The Ronin-S is designed to hold a DSLR or Mirrorless Camera camera, not a digital cinema camcorder like the EVA-1. The Ronin M would be more appropriate for the EVA-1 as a stabilizer. DJI Ronin 2 3-Axis Handheld / Aerial Stabilizer Basic Combo B&H # DJRON2BASCOM.

Q: 10. Sony a6000 is listed as a compatible camera.There's speculation that the Ronin s overkill for a camera this size.True or false?

A: The A6000 is compatible with the Ronin-S. There are certainly smaller options that will be able to balance the A6000, like the B&H # ZHZYC, but that does not mean that the Ronin-S is overkill.

23/09/2024

This is a more technical device than you might expect but it works wonderfully. It takes some serious getting used to and set-up. Unlike some of the others DJI gimbals it's not a plug and play type piece of equipment. But once you get the hang of it, it works wonders and opens up the door to a whole new style of shooting.

5
17/09/2024

I've been loving my Ronin-S. It is incredibly smooth and pretty easy to operate. It's not nearly as heavy as I was anticipating based on the initial reviews I'd seen before it came out. The joystick is the smoothest I've used which is really nice. I'm looking forward to using it on many projects. I would highly recommend it.

I do have two things I'm not super keen on though. First, when I pre-ordered it, the camera and lens compatibility list for advanced functions was much larger and the two cameras that I own (6d and 70d) were on it. That was a huge selling point. When it actually came out, only the 5D and 6d mkii were actually compatible. I was pretty disappointed with that. I really hope the new firmware updates take care of that and what they advertised will work.

Secondly, holding the trigger is what locks the pan and tilt. Maybe there is a way and I don't know yet but it would be great if you could lock the tilt but not the pan. That functionality on the Crane 2 was really nice.

5
08/09/2024

Very easy to use and feel great and look good. little better then the Crane 2 gimbal ...

5
01/09/2024

I ordered the Ronin-S on June 6th and received it on the 20th of July. Throughout the month and a half long wait, I checked the reviews for this product every day and was shocked to see it getting one and two star reviews. I'd seen a lot of YouTube videos of people just loving it!

I am a wedding videographer and I shoot with a Canon 1dxii. Most other gimbals like this just don't accommodate the weight of the beast, but I can say that this gimbal changes that. I shot a wedding this past weekend and the gimbal performed amazing! I could even put my 85mm 1.2 (an extremely heavy lens) on and it still performed amazing.

Balancing is easy if you practice a couple of times with your lenses. It doesn't need to be perfect for it to work. If you can get it relatively close to balanced, it works just great.

The battery life is amazing! I used it for most of the day and it only drained about 20% of the battery.

Overall, this gimbal has completely changed the game for me and I cannot wait to use it more!

5
21/08/2024

Build quality ... weight capacity ... usability ... everything about this Gimbal is awesome!!

5
09/08/2024

Wish there were even more accessories for this, it took a bit of online lurking to figure out how to get this working, but it's great!

5
19/07/2024

I have the Crane 2 and I am quite happy with it but I thought I would give the Ronin S a try. Mostly I use a GH5S on the gimbal so the first upgrade is manual focus control which works great. The Ronin S seems a little easier to balance and the motion seems a bit smoother. The Ronin S feels better in my hands but it is noticeably heavier. I also like that the Ronin S you can control motion using the joystick and gesture at the same time. I have to choose which mode to use on the Crane 2.

One thing I don't understand is why you have to connect that battery pack to the gimbal to charge it. That is inconvenient I like the replaceable batteries in the crane better. At least it charges relatively fast.

The extra weight seems worth it to me to get the extra features. I will keep the Ronin S and likely sell the crane 2. I hope they sell extra batteries soon I always want a backup.

5
06/06/2024

Got an email from B&H to review the Ronin S, which I never respond to them. But it did remind me to see what accessories might be available. I saw that it has a 3.5 stars???? That's nonsense. So here I am. The Ronin S is awesome. I use the Ronin M all the time. This S model gives so much more in performance features. I use the GH5 with it flawlessly, focus, start/stop record. Would I recommend it? YES.


I can only come up with 2 issues and those are operator issues. First sadly I already broke it, kinda. The little controlling cable cover door that hangs down when the cable is attached is soft. It was dark and I was breaking the S down. For some reason I didn't feel that I was grabbing the door along with the connector and pulled the door right off. Beware its soft and didn't catch I was grabbing both. You cannot take it apart and put the door tab back in. I took the smallest Leatherman flat screwdriver to slowly push it back in being careful not to puncher the cover.



Second problem I had was forgetting that the GH5 connection door was open when removing the camera.... I know dumb but I was lucky no damage when I was twisting off it only made a snapping noise. Be careful removing the camera.



That's it 2 operator errors. The Ronin S is FUN! So you might be wondering am I selling the Ronin M? Absolutely NO!


After using both they are built for different situations. I need/want both. 3.5 stars? That's just nuts. It's 5 stars easy!



FYI: GH5 users the S will balance with a Zacuto Dock attached to the mounting plate perfectly.


WHERES MY ACCESSORIES!!!

5
12/05/2024

such awesome technology! was a little hard to get initially balanced, but i've also never had to balance a gimbal before.
everything (besides follow focus) works perfectly using the IR cable with my canon t6s. havent had any issues so far

5
28/04/2024

Great build quality, excelent for my 6d mark ii just waiting for the pull focus to work with my camera in future updates

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Dyconn Albatross Quad-display Monitor Mount

$1,049.97 $1,427.96

Rosco Litepad Swivel Arm

$98.64 $123.30

Mount-it! Mi-2762 Dual-monitor Desk Mount

$329.97 $481.76

Products You May Like

Pelican 1020 Micro Case (clear Black)

$80.85 $119.66

Savage Background Leader Bar (7.16')

$230.97 $297.95

Hosa Technology Camcorder Microphone Cable

$116.85 $157.75

Barco Ex 4k Video Matrix Processor/scaler

$21,180.00 $26,263.20

Mcdsp Mc2000 V6 (hd, Download)

$447.00 $612.39

Proaim Linkon 5/8" Double Header

$115.44 $182.40