The single, Adam Professional Audio T-Series T5V is an affordable, high-quality, near-field, active studio monitor well suited for project studios, commercial recording facilities, and broadcast environments. The speaker features Adam's U-Art 1.9" accelerated ribbon tweeter with HPS waveguide and a 5" polypropylene woofer with a rear-firing bass-reflex port. The unit is bi-amped with 50W allocated to the woofer, while 20W powers the tweeter, which combine to provide a frequency response of 45 Hz to 25 kHz and a maximum SPL of 106 dB. The rear panel offers XLR and RCA connections with controls for input sensitivity, gain, high-shelf (-2, 0, +2 dB), and low-shelf (-2, 0, +2 dB). The Adam Professional Audio T5V ships with a power cord.

Open Box Products Have a Limited 2-Year Manufacturer Warranty    5" Polypropylene Woofer    U-ART 1.9" Accelerated Ribbon Tweeter    HPS Waveguide from the S-Series    Bi-Amped Class-D Amplifier    Total Output: 70W    High & Low Shelf Filters    Frequency Response: 45 Hz to 25 kHz    Maximum SPL: 106 dB    Includes Power Cord    Limited 5-Year Warranty

U-ART 1.9" Accelerated Ribbon Tweeter

• Allows longer operation with fewer signs of fatigue
• Breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
• Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)

Air velocity ratio of 4:1 during the sound generation by folded U-ART membrane

• Direct, fast response in the high-range even with complex transients

HPS waveguide from the S Series

• Makes dispersion more consistent and imaging more stable over a wider area
• Reduction of early reflections on the surfaces of mixing consoles, desks, and more

Lightweight polypropylene construction of the woofer

• Excellent transient response even at high sound levels without breakup of the diaphragm

Vertical 2-way system with 5" woofer

• High resolution of the stereo image

Rear-firing bass reflex port

• Bass reproduction with very low compression

Linear frequency response of 45 Hz to 25 kHz

• Unbiased reproduction in a wide frequency band

Maximum peak sound pressure per pair in 3.3' (1 m) 106 dB

• Powerful, compression-free sound reproduction even at very high sound levels

DSP-powered crossover design

• Smooth frequency response without interference between the drivers in the critical midrange

Simple room acoustic adjustments via high- and low-shelf filters

• Allows optimal adaptation to acoustically difficult listening environments or individual preferences

Analog inputs over XLR and RCA

• Optimized for balanced and unbalanced line signals

Acoustically optimized cabinet geometry

• Reduction of unwanted reflections on the cabinets

Related Questions and Answers

Q: 1. Do I need to purchase SAM tech separately or it will be provided with speakers if I buy pair?

A: Tom from 2018 is correct that the software is free, but that doesn't answer the actual question. Yes, you need to purchase the GLM kit. No, it's not provided with the speakers. Without the hardware in the GLM kit, you can't do anything with the free software or use any of the SAM features.

Q: 2. hi, i would like to see a graphical frequency response for the fostex 6301 N series? please. thank you so much.

A: There are no graphical frequency response charts available currently, however the frequency response range of the Fostex 6301N series is from 70hz to 15khz.

Q: 3. This item shows up when filtering for AES inputs. But that seems incorrect. Does it have AES?

A: This unit does not include AES inputs. AES inputs are available on the 8330 and larger.

Q: 4. I assume these monitors cannot be used in the vertical orientation?

A: The A8H's waveguides can be rotated, allowing them to be used either horizontally or vertically.

Q: 5. Are monitors isolators included and why the warranty is 2 year and on manufacturer website is 5 year?

A: It is 5 year with registration with Adams-Audio. The isolators are NOT included:ADAM Audio USA:e-mail: usa-info@a href= http://adam-audio.com target= _blank adam-audio.com/a

Q: 6. correct input setting?

A: The filter setting may be applied depending upon the specific needs of the room/set-up. There is no generic recommended setting.LF EQ (4-Position Selector): -9, -3, 0, +1 dBHF EQ (3-Position Selector): -1, 0, +1 dB

Q: 7. What is the frequency response?

A: As per Audio Technica, the specs for the ATH-E70 are as follows: Frequency Response: 20Hz 19kHz, Sensitivity: 109 dB/mW, Impedance: 39 ohms.

Q: 8. Did Rokit solve the black goo of death problem? I have a pair of Rocket 6s that are self destructing because of this goo.

A: KRK has not formally acknowledged the Black Goo Issue.

Q: 9. do each of the pair of speakers need do be connected to the computer by individual USBs in order to have remote access?

A: They do not. There is an XLR AES3 output is provided to route digital signal to the second monitor, necessary for correct digital signal flow.

Q: 10. how would the adam a3x sound with this instead of the 7?

A: This would compliment the Adam A3X studio monitors, which go down to 60 Hz. This subwoofer has a frequeny range of 28 Hz to 300 Hz.