You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Adam Professional Audio T7v T-series Active Nearfield Monitor (single)

Adam Professional Audio T7v T-series Active Nearfield Monitor (single)
  • Product Code: ga50919
  • Availability: In Stock

$637.47 $911.58

The single, Adam Professional Audio T-Series T7V is an affordable, high-quality, near-field, active studio monitor well suited for project studios, commercial recording facilities, and broadcast environments. The speaker features Adam's U-Art 1.9" accelerated ribbon tweeter with HPS waveguide and a 7" polypropylene woofer with a rear-firing bass-reflex port. The unit is bi-amped with 50W allocated to the woofer, while 20W powers the tweeter, which combine to provide a frequency response of 39 Hz to 25 kHz and a maximum SPL of 110 dB. The rear panel offers XLR and RCA connections with controls for input sensitivity, gain, high-shelf (-2, 0, +2 dB), and low-shelf (-2, 0, +2 dB). The Adam Professional Audio T7V ships with a power cord.

Open Box Products Have a Limited 2-Year Manufacturer Warranty    7" Polypropylene Woofer    U-ART 1.9" Accelerated Ribbon Tweeter    HPS Waveguide from the S-Series    Bi-Amped Class-D Amplifier    Total Output: 70W    High & Low Shelf Filters    Frequency Response: 39 Hz to 25 kHz    Maximum SPL: 110 dB    Includes Power Cord    Limited 5-Year Warranty

Key Specs
Monitor Type & ConfigurationActive 2-Way
Total Power Output70 W
Tweeter1x 4" / 102 mm Air Motion Transformer
Woofer1x 7" / 17.8 cm Polypropylene Cone
Frequency Range39 Hz to 25 kHz
Audio I/O1x XLR 3-Pin Balanced Line Input
1x RCA Unbalanced Line Input
Digital Audio I/ONo
Network I/ONo
WirelessNo
Parameters
Number of Included MonitorsSingle Monitor
EnclosureBass-Reflex/Ported, Shielded
Total Power Output70 W
Tweeter1x 4" / 102 mm Air Motion Transformer
Woofer1x 7" / 17.8 cm Polypropylene Cone
AmplifiersLF: 50 W Class-D
HF: 20 W Class-D
Performance
Frequency Range39 Hz to 25 kHz
Maximum Sound Pressure Level (SPL)110 dB (Peak)
Total Harmonic Distortion (THD)0.5%
Signal Processing
EQ1x HF Shelf
1x LF Shelf
Crossover Frequency2.6 kHz
Connectivity
Audio I/O1x XLR 3-Pin Balanced Line Input
1x RCA Unbalanced Line Input
Digital Audio I/ONo
Network I/ONo
USBNo
WirelessNo
Mobile App CompatibleNo
Power
AC Input Power100 to 240 VAC, 50/60 Hz
Power Consumption132 W
Physical
ColorBlack
Monitor OrientationVertical
Mounting PointsNo
Dimensions (W x H x D)8.3 x 13.7 x 11.5" / 21.1 x 34.8 x 29.2 cm
Weight15.7 lb / 7.1 kg
Packaging Info
Package Weight18.45 lb
Box Dimensions (LxWxH)18.1 x 15.3 x 11.6"

U-ART 1.9" Accelerated Ribbon Tweeter

  • Allows longer operation with fewer signs of fatigue
  • Breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
  • Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)

Air velocity ratio of 4:1 during the sound generation by folded U-ART membrane

  • Direct, fast response in the high-range even with complex transients

HPS waveguide from the S Series

  • Makes dispersion more consistent and imaging more stable over a wider area
  • Reduction of early reflections on the surfaces of mixing consoles, desks, and more

Lightweight polypropylene construction of the woofer

  • Excellent transient response even at high sound levels without breakup of the diaphragm

Vertical 2-way system with 7" woofer

  • High resolution of the stereo image

Rear-firing bass reflex port

  • Bass reproduction with very low compression

Linear frequency response of 39 Hz to 25 kHz

  • Unbiased reproduction in a wide frequency band

Maximum peak sound pressure per pair in 3.3' (1 m) 110 dB

  • Powerful, compression-free sound reproduction even at very high sound levels

DSP-powered crossover design

  • Smooth frequency response without interference between the drivers in the critical midrange

Simple room acoustic adjustments via high- and low-shelf filters

  • Allows optimal adaptation to acoustically difficult listening environments or individual preferences

Analog inputs over XLR and RCA

  • Optimized for balanced and unbalanced line signals

Acoustically optimized cabinet geometry

  • Reduction of unwanted reflections on the cabinets

Related Questions and Answers

Q: 1. correct input setting?

A: The filter setting may be applied depending upon the specific needs of the room/set-up. There is no generic recommended setting.LF EQ (4-Position Selector): -9, -3, 0, +1 dBHF EQ (3-Position Selector): -1, 0, +1 dB

Q: 2. Do I get a pair if i make this purchase?

A: You have to order 2 to get a pair.

Q: 3. Can I use it as desktop speakers?

A: Yes. These will work on a desktop. Isolation pads are usually a good option to ensure the desk does not resonate with the speakers. I would recommend using an audio interface for the best sound out of a computer, but a cable like this can be a less costly solution to output sound from a computer: https://bhpho.to/3yudNDe

Q: 4. Did Rokit solve the black goo of death problem? I have a pair of Rocket 6s that are self destructing because of this goo.

A: KRK has not formally acknowledged the Black Goo Issue.

Q: 5. Are monitors isolators included and why the warranty is 2 year and on manufacturer website is 5 year?

A: It is 5 year with registration with Adams-Audio. The isolators are NOT included:ADAM Audio USA:e-mail: usa-info@a href= http://adam-audio.com target= _blank adam-audio.com/a

Q: 6. Does it come with the speaker grates?

A: Sorry, grates are not included.

Q: 7. Do I need to purchase SAM tech separately or it will be provided with speakers if I buy pair?

A: Tom from 2018 is correct that the software is free, but that doesn't answer the actual question. Yes, you need to purchase the GLM kit. No, it's not provided with the speakers. Without the hardware in the GLM kit, you can't do anything with the free software or use any of the SAM features.

Q: 8. I assume these monitors cannot be used in the vertical orientation?

A: The A8H's waveguides can be rotated, allowing them to be used either horizontally or vertically.

Q: 9. Is this D2 version?

A: No. The M-Audio BX5 D2 Active 70W 5" 2-Way Studio Monitor Speaker - Pair (B&H # MABX5D2) is a discontinued model. The M-Audio BX5 Graphite 5" 100W Active Studio Monitor is a newer model which is single active studio monitor with updated features and more power.

Q: 10. how would the adam a3x sound with this instead of the 7?

A: This would compliment the Adam A3X studio monitors, which go down to 60 Hz. This subwoofer has a frequeny range of 28 Hz to 300 Hz.

23/09/2024

Monitors are of good quality, scooped up sound. Very pleased with them, thinking maybe adding T10 sub along for a full mix preview.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Rat Rig 39" Single Rail V-slider

$449.85 $638.79