The Planet Waves Custom Series D'Addario PW-MPXLR-06 is a Y cable designed to connect your mobile device to any sound system that sports XLR inputs. At one end of the cable, you'll find a 3.5mm stereo connection for smartphones, tablets, media players, computers, and other compatible accessories. At the other are two XLR male plugs. The cable is 6' long.

Routes Mobile Devices to Sound Systems    Enables Stereo Connection    3.5mm to 2 x XLR Y-Cable    Cable Length of 6'    Oxygen-Free Copper for Pure Tone    Double-Molded Strain Relief    Shielded for Noise Rejection    Limited Lifetime Warranty

This cable utilizes oxygen-free copper conductors for low capacitance and pure tone

Encapsulated soldering points with double-molded strain relief provide durability and reliability

Two layers of shielding offer coverage for insulation and noise rejection

This cable carries a limited lifetime warranty

Related Questions and Answers

Q: 1. Will this mount the Auray DUSM-1 shockmount?

A: The Auray DUSM1 shock mount features a 3/8 female threading compatible with the K-Tek boom poles.

Q: 2. what c-stand and clamps do I need with the K-Tek KE-89CC?

A: For the C-stand, you can use any model, just be sure to select one that accommodates the height you require. Any standard C-stand and boompole holder can be used. For a stand that extends 10 feet, you may like the Impact Turtle Base C-Stand - 10.75' - Chrome (B&H# IMLSCT40M). The same stand is available in different heights. For an easy to use boompole holder, consider the Auray Boompole Holder and Grip Head Kit (B&H# GBBPHK) or BoomMate Boompole Holder and Grip Head Kit (B&H# BOBPHK).

Q: 3. is this a true TRS? meaning the tip is wired to pin 2, ring is wired to ping 3 and sleeve is pin 1 ? Or is this a pre-summed TRS?

A: This cable is wired straight through. Standard TRS. Pin 2 to Tip, Pin 3 to Ring, Pin 1 - Ground/Shield.

Q: 4. Is this a balanced cable?

A: No, the Roland Black Series 1/4" TRS to Dual 1/4" TS Cable is an unbalanced cable.

Q: 5. What screws can I use to mount connectors?

A: You can use 4-40 x 3/8" or 4-40 x 1/2" screws with the TecNec 16-Port Unloaded D-Series XLR Rack Panel (1 RU).

Q: 6. Does this pull one channel, or take both? I believe you need an extra resistor in there to take both channels. Thanks!

A: Most adaptors of this sort will take two channels from the 3.5 stereo end and mono it out (combine to 1 channel) into the Xlr end.

Q: 7. Can I use this cable to send an audio feed(3.5mm/sub out) from a Zoom F4 Recorder into a cameral's XLR input, such as Sony FS7?

A: The Mogami Gold 3.5mm TRS Male to Dual XLR Male Y-Cable could be used to connect a line output to a camera's XLR inputs, but you should be sure to set the input level to line level to avoid overloading the camera's preamps.

Q: 8. Is this compatible with the Rode VideoMic Pro Compact Shotgun Mic?

A: The rode video mic pro is a shotgun mic designed for dslr shooters. It has a mini jack for hooking into the mic jack of a dslr type camera and a cold shoe for fitting into the top of a dslr. You wouldn't want to use it on this boom pole. What you want is the rode NTG series shotgun mics. These are the video professional grade shotgun microphones, the NTG-1, NTG-2, NTG-3, NTG-4, and NTG-8. I personally use the NTG-1, and it has served me well for almost 8years. It requires phantom power from whatever recording device you are connecting it to but it is a great mic. You'll need a shock mount though to fit it onto the boom pole. I would suggest the Rode SM4 shock mount. Or if you want protection from wind look no further than the rode blimp and windscreen system. With this kit you are good to go for all indoor and outdoor shooting. Hope this helps!

Q: 9. What is the warranty for this?

A: The D'Addario PW-MPTS-06 Custom Series 1/8" Stereo Plug to Dual 1/4" Plugs Audio Cable has a limited lifetime warranty from the manufacturer.

Q: 10. Is the side-exit XLR port suitable for a plug-on wireless transmitter (such as the Sennheiser EW series "SKP"), or will it not attach firmly enough?

A: In theory, yes, you could connect a plug-on transmitter to the side exit XLR output on the K-Tek KE-110CCR Avalon Series Aluminum Boompole with Internal XLR Cable. Ideally, the transmitter would have a locking mechanism for secure connection at the XLR output.