This 24" RT MK3.1 EPIC +1/PRO-IO Module Power Cable from Teradek connects power from an EPIC +1 or PRO I/O Module to the MK3.1 receiver. This cable is designed with a 4-pin Hirose connector on one end, and a 4-pin LEMO connector on the other.

39" Length Cable    4-Pin Hirose to EPIC +1/PRO-IO Module    Connects Power to MK3.1 Receiver

Related Questions and Answers

Q: 1. If this has a maximum torque of 1.2nm, does that mean it's less responsive than the mk3.1 and motr.x?

A: Yes, the Teradek RT MOTR.S Max Lens Motor does have less torque than the MK3.1 and MOTR.X. However, the tradeoff is that this is faster.

Q: 2. Does this work with the Teradek CTRL.3 Latitude MDR-X and a Sony FX9 camera? One side is a 2.5mm LANC and the other side is?

A: Yes, this cable [Teradek RT Latitude MDR LANC Run/Stop Cable (16")] is compatible with the Sony FX9. The other end of this cable has a 6-pin LEMO port. Teradek calls it a CAM port.

Q: 3. Is it compatible with wooden camera top and bottom plates?

A: This device connects directly to the RED DSMC2 Camera's Right Side. It should still work with a top and bottom plate on the camera, it would just depend on the exact model of plates and how they sit on the camera.

Q: 4. Can this be used with the SmartKnob to control EF lenses on RED?

A: This product, along with the RT Smartknob, are both controllers. You would not connect them to each other, however you should be able to use both within a system with multiple motors. One could be set to control the focus while the other zoom or iris.

Q: 5. Will the MDR be compatible with RED Komodo for EF/RF lens control?

A: NO This is NOT compatible with the Komodo

Q: 6. Will the clamp work on the DJI Grip for Ronin 2 (30 mm)? Same size as Movi Pro ring. Or is there an alternative clamp?

A: Yes, this should clamp to the DJI Grip for the Ronin 2.

Q: 7. I'm trying to connect Dtap to Lemo to power my RedRaven through a Red DSMC2 V Lock I/O expander. Will this cable work?

A: Yes, this cable will work.

Q: 8. How is this powered? From the side of the DSMC2 Brain or from the DC outlet I see on the bottom? Thx.

A: This product requires a RED-approved DSMC2 Expander module with an RS-232 control port, such as B&H # REDSMC2IOVLE. Once you have the Expander the required cabled are included with the Teradek product. https://bhpho.to/2B1IpRG

Q: 9. Is this different from the standard Alexa run/stop port?

A: Yes, the ALEXA cameras use a 3-Pin EXT-RS port.

Q: 10. Would this work with the Ranger models?

A: Unfortunately, the Teradek RT ACI Module for RED DSMC2 will not fit the RED Ranger cameras.