This black Clip for Capture v3 from Peak Design serves as a replacement part or as an additional support point for the Capture v3 harness system. By equipping more than one bag or strap with Capture clips, you can carry several cameras at once or switch between the two clips easily for comfortable and versatile use. Note that a plate is not included with this product, and must be purchased separately in order to carry equipment.

Keeping a slim profile at only 3.3" in length and weighing just 2.5 oz, the clip uses included thumbscrews or hex-head bolts to clamp onto any strap or belt as wide as 2.5" and as thick as 0.87". It is made of weatherproof aluminum to resist rust and is designed to withstand up to 200 lb of force. The clip is equipped with a quick release button so you can instantly grab your camera and start shooting, and it has a security lock that can be activated to prevent accidental release during longer trips. For enhanced stability, an anti-slip pad is used on the back plate for grip. All legacy Peak Design plates work with the Capture v3 clip except for the DUALplate v1, allowing you to carry objects such as lenses, binoculars, or GoPro cameras with optional accessories.

Clip Only, Replacement or Extra Part    For Straps up to 2.5" Wide & 0.87" Thick    Withstands Forces up to 200 lb    Quick Release Button for Instant Access    Slim Profile: 3.3" Length, Weighs 2.5 oz    Security Lock Helps Prevent Accidents    Anti-Slip Pad for Improved Stability    Rust-Resistant Aluminum Construction    Works with Most Other Peak Design Plates

• Replacement or additional clip for Capture v3 system, plate must be purchased separately in order to carry equipment
• Made entirely of rust-resistant aluminum and designed to withstand up to 200 lb of force
• Fits straps or belts up to 2.5" wide, and as thick as 0.63" with thumbscrew bolts or up to 0.87" thick with hex-head bolts
• Anti-slip pad for better grip on the mounting surface, increasing stability
• Quick release button for swift and easy access to camera
• Security lock prevents accidental release for safety during longer excursions
• Slim design with a length of 3.3" and a weight of 2.5 oz
• Compatible with all Peak Design plates except for the DUALplate v1, allowing for objects such as GoPro, lenses, and binoculars to be used with optional accessories

Related Questions and Answers

Q: 1. What side of a backpack strap is this usually used on? Can this be used with a BlackRapid strap or PD Slide ?

A: The Peak Design Capture Camera Clip v3 can clamp onto any strap or belt as wide as 2.5" and as thick as 0.87". When on a backpack, the camera clip part is generally on the outside. This can clamp to any strap that fits the specifications. Though using it on a camera strap may pull the strap down, and it would be harder to clip and unclip the camera when mounted on a camera strap.

Q: 2. Is the capture camera v3 comfortable and safe to use for a Canon R6 mk11 with attached? 100-500 mm lens?

A: The Peak Design Capture Camera Clip v3 (Black) will work with the Canon R6 mark II. However, using the Peak Design Capture Camera Clip v3 (Black) with a telephoto lens it can be uncomfortable. Generally, prime lenses on the smaller side would be the way to go.

Q: 3. Can you still access the battery door on a Fuji X-T1 with the plate screwed into the body?

A: Nope. I have the Fuji X-t1, sadly the plate still won't access the battery door. The slot is simply not long enough and the screw head is too big. Potentially can modify the plate... but that's at your own risk.

Q: 4. Will the capture Clip V3 with dual plate v2 work securely on LowPro photo sport backpack? Do I need the Propad?

A: The Capture Clip V3 will work with the Dual Plate V2. You do not need the PROpad.

Q: 5. Can the Peak Design Capture Clip be used on the straps of the Hex Cinema Backpack?

A: The straps on the Hex Cinema Backpack will be too thick for the Peak Design Capture Camera Clip v3 (Black).

Q: 6. Can this be used with 3 Legged Thing Zelda on Z6? Using 3LT Travis 2.0 tripod currently. Thanks

A: Yes, they are both Arca Swiss compatible.

Q: 7. Does the backpack screws come with this ?? Jim

A: Yes.

Q: 8. Do I need to use their supplied base plate or can I use one of my existing plates? -- Currently I use the Manfrotto 501 plate, but can switch to arca, but I would prefer a larger arca base plate for my tripod as I shoot video and use heavy lenses. So, would I be able to use any arca baseplate, or even an L-bracket with this?

A: This system is only meant to be used with the Peak Design plates. A long plate would not fit properly in this system.

Q: 9. in your opinion, can the capture secure a d-850 while on a road bike (city riding)?

A: Yes it will

Q: 10. I already have a ARCA type tripod and plate. Will the plate I have fit the clip itself? Basically, can I buy just the Peak Design V3 Capture Camera Clip or do I have to buy both the plate and the clip?

A: No, a standard ARCA Plate won't fit into the Capture Clip. You have to use their plate in order to use the clip. However, if you already have an ARCA tripod, the Capture plate will fit the ARCA tripod.