This silver Clip for Capture v3 from Peak Design serves as a replacement part or as an additional support point for the Capture v3 harness system. By equipping more than one bag or strap with Capture clips, you can carry several cameras at once or switch between the two clips easily for comfortable and versatile use. Note that a plate is not included with this product, and must be purchased separately in order to carry equipment.

Keeping a slim profile at only 3.3" in length and weighing just 2.5 oz, the clip uses included thumbscrews or hex-head bolts to clamp onto any strap or belt as wide as 2.5" and as thick as 0.87". It is made of weatherproof aluminum to resist rust and is designed to withstand up to 200 lb of force. The clip is equipped with a quick release button so you can instantly grab your camera and start shooting, and it has a security lock that can be activated to prevent accidental release during longer trips. For enhanced stability, an anti-slip pad is used on the back plate for grip. All legacy Peak Design plates work with the Capture v3 clip except for the DUALplate v1, allowing you to carry objects such as lenses, binoculars, or GoPro cameras with optional accessories.

Clip Only, Replacement or Extra Part    For Straps up to 2.5" Wide & 0.87" Thick    Withstands Forces up to 200 lb    Quick Release Button for Instant Access    Slim Profile: 3.3" Length, Weighs 2.5 oz    Security Lock Helps Prevent Accidents    Anti-Slip Pad for Improved Stability    Rust-Resistant Aluminum Construction    Works with Most Other Peak Design Plates

• Replacement or additional clip for Capture v3 system, plate must be purchased separately in order to carry equipment
• Made entirely of rust-resistant aluminum and designed to withstand up to 200 lb of force
• Fits straps or belts up to 2.5" wide, and as thick as 0.63" with thumbscrew bolts or up to 0.87" thick with hex-head bolts
• Anti-slip pad for better grip on the mounting surface, increasing stability
• Quick release button for swift and easy access to camera
• Security lock prevents accidental release for safety during longer excursions
• Slim design with a length of 3.3" and a weight of 2.5 oz
• Compatible with all Peak Design plates except for the DUALplate v1, allowing for objects such as GoPro, lenses, and binoculars to be used with optional accessories

Related Questions and Answers

Q: 1. So, what happens if all my tripods use manfrotto plates?

A: If you have a Manfrotto RC2 plate on your heads, you can use the Peak Manfrotto plate. Click on the link below to view; https://bhpho.to/376mBST

Q: 2. what tripods is this compatible with?

A: All Arca Tripod Mounts and most RC2 with our Dual Plate. See all info here: a href= https://support.peakdesign.com/hc/en-us/articles/215887643-Choosing-Your-Range-Pouch-Size target= _blank https://support.peakdesign.com/hc/en-us/articles/215887643-Choosing-Your-Range-Pouch-Size/a

Q: 3. Will this hold a Z8 with a 150-600 sigma or 180-600 nikon?

A: Yes, the Peak Design Capture Camera Clip v3 (Black) can hold a Z8 with a Sigma 150-600mm or a Nikon Z 180-600mm. However, it may not be comfortable.

Q: 4. Do the hex-headed studs come with this clip-only version?

A: They do. Comes with both the thumb screws and the hex heads to replace the thumb screws if desired.

Q: 5. Does the base plate for the Camera Clip v3 fit on the Oben B117? ball head?

A: Yes, our plates will be compatible with that Oben B117.

Q: 6. Any women using this ? Is it uncomfortable for a woman to use this ?

A: Peak Design Capture Camera Clip v3 (Silver) is being used by women and it is not uncomfortable. I have not heard any complaints.

Q: 7. Is this clip compatible with the Tilta Camera Cage for BMPCC 4K?

A: Yes. You would just screw the small plate on the bottom of the Tilta cage.

Q: 8. I have the plate from V2. Will it work with V3 clip?

A: Yes, V2 plate works on V3. V3 plate POTENTIALLY could work with V2 capture. V2 capture sticks out more, so V3 plate might be too thin and thus the bolt on the capture might block the camera from sliding in. However, I find that I am still able to slide my mirrorless with v3 plate into a v2 capture if I turn it side ways.

Q: 9. will this fit the think tank pro and/or steroid belts?

A: It will be compatible with Think Tank Belts. See here: a href= https://support.peakdesign.com/hc/en-us/articles/201041778-Using-Capture-with-heavy-cameras-pro-lenses-and-battery-grips target= _blank https://support.peakdesign.com/hc/en-us/articles/201041778-Using-Capture-with-heavy-cameras-pro-lenses-and-battery-grips/a

Q: 10. How does this compare to the Spider holster? I've owned the spider for around 10 years and have liked them.

A: Both the Peak Design Capture Camera Clip v3 (Silver) and the Spider Camera Holster Spider X Camera Holster Backpacker Kit would be good options for a camera holder that can attach to the strap of a backpack or camera bag. While the usage of the two would be nearly identical, the main difference is the Peak Design option will hold the camera facing directly down against the camera strap, whereas the Spider option has a ball on the base of the camera's tripod socket and will allow the camera to hang in a various positions, though it usually will lay with the lens across your chest..