Illuminate the aquatic world at depths as great as 492' with the silver 20° Aqualite Pro eLED Lamp Head, which fits on all Underwater Kinetics Aqualite Dive Lights. The spot beam is narrow enough to be an effective focusing light or a means of exploring tight spaces, but also wide enough to be a general backup or primary dive light. This LED head features three or four outputs ranging from 160-750 lumens, depending on which light body you're using. Additionally, the lights' batteries provide run times that vary from 1.6 hours on the high-output setting to 12 hours on the low setting.

Depth Rating: 492'    Multiple Outputs from 160-750 Lumens    Run Time: 1.6-12 Hours    20° Beam Angle    Color Temperature: 5500-6500K    Compatible with All Aqualite Dive Lights    Requires Light Body and Battery    Anodized Aluminum Alloy    Made in the USA

• Light source: eLED
• Four outputs on the Aqualite Pro: 160, 300, 430, and 750 lumens
• Up to 500 lumens on the Aqualite-S and Classic
• Run time: 1.6-12 h on the Pro, 2.0-9.0 h on the S
• 20° beam angle makes the head effective as a focusing light and tool for exploring tight spaces, while also allowing for use as a general backup dive light or even a primary one
• Spot beam ensures good visibility by reducing the reflection of light off particles in the water, which is known as backscatter
• Daylight-balanced color temperature of 5500-6500K restores hues that are absorbed by water, so you can see everything in rich, vibrant, accurate colors

• Depth rating: 492'
• Crafted from a machined aluminum alloy known as Hydralum, which acts as a heat sink for cooling
• Anodized for excellent corrosion resistance
• Light heads are interchangeable and can be connected to all Aqualite bodies, including the Pro, S, and Classic
• Made in the USA

Related Questions and Answers

Q: 1. Does this dive light feature an automatic SOS light feature?

A: The Tovatec Mera Dive Light with Camera does not have an auto SOS feature.

Q: 2. Is this compatible with a Meikon housing for iPhone 7 Plus?

A: The Underwater Kinetics Aqualite Travel Grip for Underwater Camera and Lights has a standard 1/4 -20 bolt. It could be attached to any housing that has a standard 1/4 -20 socket. We do not sell Meikon underwater housings. We suggest you connect a Meikon dealer. Underwater Kinetics Aqualite Travel Grip for Underwater Camera does not include the light.

Q: 3. I need a red filter for my tovatec camera and I can't find one

A: There isn't a red filter for the Tovatec Mera Dive Light with Camera. If there was it would filter the camera and the light so the images would be too red. If you move in really close to your subject the built-in light should correct the color.

Q: 4. Can this light use the uv-395 eLED lamp Head ?

A: According to Underwater Kinetics, the factory installed lights can be replaced with these ones as well.

Q: 5. will this battery pack work in will this battery pack work in the the UK Aqua Sun eLed ? if so how much of a boost does it give it

A: It does not look like this Underwater Kinetics Rechargeable NiMH Battery for C8 eLED L2 or Light Cannon eLED L1 Dive Light is compatible with the Aqua Sun eLed.

Q: 6. What is the color temperature of this lamp--warm, cool, or somewhere in-between? I would prefer on the warm side, like the halogen lamp it will replace.

A: This light specification is 2500 Lux, therefore the light should be a warm white color.

Q: 7. What is the best resolution to set for underwater video?

A: Just like on land it is best to set the camera at the highest resolution. You could always lower the resolution in the computer. You cannot increase it.

Q: 8. can the light bulbs be replaced by lamp owner if they ever go bad?

A: The leds on this light are not user replaceable.

Q: 9. Does it have a specific above and below-water setting? Is that why the brightness and runtime change above and below water?

A: Yes the Godox WT40R RGB Dive Tube Light (15") has an underwater setting which draws more power and thus offers a lower run time underwater.

Q: 10. Will this case carry and protect a Nikkor 300 2.8 MM lens?

A: Yes, however you will need foam inserts.