The two-input SDI to QAM Modulator and IPTV Streaming Encoder from Thor bundles a real-time HD hardware encoder with a managed program stream multiplexer and RF QAM modulator. It can encode two channels of HD-SDI video to MPEG-2 or H.264, and modulate the programs on QAM carrier outputs. The unit can also modulate programs encoded externally via an ASI input. This platform is suitable for corporate MATV systems or in-house HD video distribution from SDI sources.

Quadrant Amplitude Modulation (QAM) is commonly used in cable TV systems due to its high bandwidth. The QAM-IP chassis supports all three primary J.83 QAM standards; ITU-T J.83A, J.83B, and J.83C. Any QAM-IP chassis can be set to output RF carriers under either of these three standards without the need to change firmware. The encoder modules are independent of the modulator chassis system.

The HD-SDI uncompressed digital video is commonly used in broadcasting and professional A/V systems. Serial digital video can be carried over single-conductor coax cables employing common BNC connectors. The low-latency encoding reduces the time delay between video input and encoded program output.

• Broadcasts live HD-SDI video and ASI as cable TV and IPTV channels
• Broadcasts over the existing coaxial cabling to an unlimited number of televisions with Full HD resolution
• Low-latency encoding
• Encoding latency of approximately 70 to 110 ms
• Any SDI input up to 3G-SDI at 1920 x 1080p60
• ASI input SPTS or MPTS up to 120 Mb/s
• Fully network-managed through browser
• QAM-256/64 RF output
• IPTV output unicast or multicast IGMP UDP, RTP/RTSP
• ASI output with multiplexer cherry picking

Related Questions and Answers

Q: 1. How do you access the settings for this device?

A: The following unit is Web pages based. The unit provides the same settings as the front-panel menus in simple Web forms based on a web driven interface.

Q: 2. What is the max bitrate output?

A: Yolo-Liv doesn't publish the maximum bitrate of the YoloLiv Instream Vertical Live Streaming Encoder and Monitor.

Q: 3. Is there a certain type of SD card or USB thumb drive that works best with this machine for recording audio and video?

A: The Datavideo H.264 Dual Streaming Encoder/Recorder has no recording with the USB, it is for Firmware updates only. The SD card Does not need to be UHS-II.

Q: 4. Could you please expatiate on this response? "However this model runs the original Tik Tok and Instagram phone apps in a vertical mode."

A: Both Instagram and Tik Tok work with phone apps. You must use the Instagram phone app to connect with Instagram or you could be banned. Since the YoloLiv Instream uses the approved phone app from Instagram or Tik Tok you will not be banned for using a 3rd party solution.

Q: 5. Can it stream to ANY RTMP destination?

A: The YoloLiv Instream Vertical Live Streaming Encoder and Monitor lists in its specifications the capability of streaming using RTMP/RTMPS.

Q: 6. Can the HDMI out port of the Instream be used to connect a bigger external monitor to mirrow the Instream display?

A: Yes, you can use the HDMI output to output a mirror of the YoloLiv Instream Vertical Live Streaming Encoder and Monitor's display to a larger monitor.

Q: 7. would this device be able to display unencrypted catv digital signals? we use them at our business from a blonder tonue encoder.

A: The Thor QAM CATV RF and ATSC RF to HDMI Decoder Set-Top Box is designed to decode ATSC and QAM Signals.

Q: 8. Can you also stream horizontal?

A: The YoloLiv Instream Vertical Live Streaming Encoder and Monitor is designed only for vertical use.

Q: 9. How is this any different than the OG box?

A: The YoloLiv Instream Vertical Live Streaming Encoder and Monitor is similar to the Yolobox. However this model runs the original Tik Tok and Instagram phone apps in a vertical mode.

Q: 10. unlock code?

A: Please call Zv Technical Support at 877-493-3833 or email them at support@zeevee.com. They can help you out with the unlock code. Thanks