The cocoa E6 Flex Directional Earset Mic with Highest Gain and Detachable 2mm Cable from Countryman combines the best of the classic E6 directional earset with the best of the directional E6i. It is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. The E6 Flex can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Flex Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 Flex to your skin tone for minimum visibility.

In addition, the E6 Flex Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Flex Earset's cable terminates to a 3.5mm locking connector for direct connection to a Senal AWS-2000 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 2mm Cable    3.5mm Locking (S4), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 Flex head-worn Earset combines the best of the classic E6 directional earset with the best of the directional E6i. The slim, springy ear section grips securely like an E6 classic, while the flexible front boom takes abuse like the E6i, and allows precise placement and easy reshaping. It is small and lightweight, and is hardly visible from a distance.

The E6 Flex Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. The protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 Flex provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. The directional, pattern-changeable microphone delivers maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. The omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Flex Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 Flex replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For general speaking.

Related Questions and Answers

Q: 1. Does this work on the Tascam DR-10L?

A: This would be the appropriate locking 3.5 mm connector for a microphone to be connected to the Tascam DR-10L digital recorder.

Q: 2. What is the Range from mic to receiver

A: These systems work line of sight and base specs off of optimal conditions. Realistically, 100-150 feet would work even though most of the time they will claim around 300 feet.

Q: 3. Is this a female 4-pin end that will specifically fit the audio-technica T-210?

A: No, the connector on this particular Countryman E6 & E6i Snap-on Replacement Microphone Cable is a TA5 which is a 5-pin mini-XLR connector. The Audio-Technica ATW-T210 Wireless Bodypack Transmitter uses a 4-pin Hirose cW-style connector. The version of the E6 cable that you will need for the ATW-T210 transmitter is the Countryman Snap-On Replacement Cable for E6 & E6i with Hirose 4-Pin cH-Style Connector - 1mm, Beige (B&H # COE6CABLEB1A).

Q: 4. Would this TA4F work with the Line 6 XD wireless headset mic?

A: This TA4F mini XLR could work with the Line 6 HS70/HS70T Omni-directional Headset Microphone.

Q: 5. Where is this product manufactured?

A: The Sennheiser XSW 2-835-A is currently manufactured in Taiwan.

Q: 6. do I need one or tow of these?

A: This would depend on whether your specific application calls for a diversity or non-diversity wireless system and what kind of coverage is needed. In many circumstances however, using two is most common.

Q: 7. Can I split the RF output of this to 2 receivers using a BNC-TEE, or do I need an RF splitter?

A: You would be able to accomplish this using the UA221. https://www.bhphotovideo.com/c/product/1335931-REG/shure_ua221_rsma_reverse_sma_passive_antenna.html

Q: 8. Would these work on the Sony UWP range?

A: No this 3.5mm locking pin connector was designed for Sennheiser systems

Q: 9. The unit says this is good for 470-698 MHz. The headline says 470-900. Please, what is correct?

A: The Shure UA874WB Wideband Active Directional Antenna (470 to 900 MHz), BH # SHUA874WB, is designed for UHF signal reception extending from 470 to 900 MHz.This is also documented in the user guide. Please note the "WB" (Wide Band) designation on page 3/4: https://www.bhphotovideo.com/lit_files/1096710.pdf

Q: 10. Can I get this in the G frequency Range or another Range?

A: No. As a US dealer, B&H offers the components in the Sennheiser XSW 2 Wireless Combo System with Handheld Mic & Senal Earset Mic for frequency range A (548 to 572 MHz) which is the only frequency band offered for the XS Wireless Series systems to use in North America. All of the frequency bands for Sennheiser's XS Wireless Series systems differ from the frequency bands used for the Evolution Wireless Series and the components from these two series do not work together. For example, frequency range A for the Evolution Wireless Series system is 516 to 558 MHz, which is different from the A range for the XS Wireless series. There is no frequency range G for the XS Wireless Series and the other ranges that Sennheiser offers for the XS systems are only for use in different countries. Each of the other frequency ranges for the XS Wireless Series are only sold in the countries where they can be used.