Designed for commercial and fashion photographers, this 28" EZ-Pro Deep Parabolic Softbox from FotodioX features a deep construction that provides a large and soft light source for your subjects. It comes equipped with a Photogenic speed ring, making it compatible with Photogenic StudioMax series and Powerlight PL-series strobes, among other models. Optional speed ring inserts can also be used for quickly switching compatibility to additional light mounts. Thanks to its heat-resistant fabric, this softbox can be used with strobes as well as continuous light sources without any problems.

The EZ-Pro can be set up or collapsed in seconds. Its supporting rods open and close like an umbrella, and the included speed ring makes it easy to simply snap it onto the light. The interior of the softbox is lined with a reflective silver material and features a removable inner baffle, both of which help direct the light towards the subject and give you control over the composition. An outer front diffuser is also provided to help even out light intensity across the softbox. Both panels can be left in place while the softbox is collapsed to make for an even easier experience.

For Strobe, LED, Fluorescent, etc.    Heat-Resistant Fabric for Hot Lights    Lined with Reflective Silver Material    Inner Baffle and Front Diffuser    Easy to Set Up and Tear Down    Optional Additional Speed Ring Inserts

• Norman ML400 and ML600
• Photogenic StudioMax Series
• Powerlight PL-Series

Related Questions and Answers

Q: 1. Will this work with Godox AD 200?

A: Yes, you will need Godox S-type Bracket Bowens Mount Holder for Speedlite Flash Snoot Softbox Honeycomb. This is an adapter to use with any Bowens light modifier and your ad200.

Q: 2. Will this connect to the Godox SL-60W?

A: The Fotodiox EZ Pro with Bowens mount will fir on the SL60W.

Q: 3. What is the depth?

A: The depth of the FotodioX EZ-Pro Deep Parabolic Softbox (48", Bowens Speed Ring) is listed as 27.5 inches (70 cm).

Q: 4. does it work with speed lights?

A: You have to get a s-type bracket for you to use it with a speedlite which cost about $20.

Q: 5. Can I use a Nikon SB900 Speedlight with this softbox?

A: By adding the Godox S-Type Speedlite Bracket for Bowens B&H # GOSZ1, you may use this Fotodiox softbox with its Bowens mount. https://bhpho.to/2Fw3pj6

Q: 6. Would this work with the aputure 120d???

A: This will work with the Aputure 120d.

Q: 7. Can i fit my Godox ad600pro in this?

A: Buy it with confidence it fits.

Q: 8. Does it work with the Godox AD200?

A: If you purchase the Godox S-Type Speedlite Bracket for Bowens, B&H # GOSZ1, then yes, you may use the Godox S-Type Speedlite Bracket for Bowens to mount the FotodioX EZ-Pro Deep Parabolic Softbox (48", Bowens Speed Ring) for use with the Godox AD200 TTL Pocket Flash.

Q: 9. What lights would go well with this Softbox? Was hoping it would show in recommended accessories.

A: You could use the Fotodiox LED https://bhpho.to/2Jv00qd.

Q: 10. What kind of stand should I get in order to use this?

A: The FotodioX EZ-Pro Deep Parabolic Softbox (48", Bowens Speed Ring) B&H # FOEZPDSBI48, is designed to connect to the Bowens speedring connection on your light fixture, not directly to a light stand. The only stand requirement is that it should have a higher maximum load capacity than the combined weight of your light fixture and the softbox. Estimating the weight of most monolights are approximately 6-7 lbs, and the weight of the softbox is approximately 3 lbs, you should use a stand that supports 10 lbs or more. If you are looking for recommendations, I would recommend the Kupo Baby Roller Stand (8.8'), B&H # KUKS300712, the Impact Folding Wheeled Base Stand (Black/Chrome-plated, 8.5'), B&H # IMLSPSFB8, the Impact Turtle Base C-Stand - 10.75' (Chrome), B&H # IMLSCT40M, the Manfrotto Alu Air-Cushioned Compact Stand (Black, 7.7'), B&H # MA1052BAC, or the Impact Heavy-Duty Air-Cushioned Light Stand (Black, 9.5'), B&H # IMLS96HABI, depending on your budget and/or the type of stand you are interested in purchasing.