Capture brilliant images of the aquatic world with your Canon EOS 6D Mark II DSLR camera in Ikelite's 200DL Underwater Housing with Dry Lock Port Mount, which has a depth rating of 200'. An Ikelite bulkhead with a manual hot shoe connection enables reliable electrical triggering of optional external strobes via sync cords. The use of an optional TTL hot shoe and converter will allow for TTL operation with compatible Ikelite DS strobes; non-Ikelite strobes will still work in manual mode only.

Ergonomic, mechanical push-buttons, dials, and levers afford access to nearly all camera functions, including all the essential ones. Built for durability, the enclosure is made in the USA from a corrosion-resistant polycarbonate and ABS plastic blend. It is white on the front, top, sides, and bottom, but clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera's rear controls. The supplied aluminum tray with a left-hand quick-release grip affords improved balance and handling, while offering an attachment point for an optional lighting arm.

This housing ships without a required lens port, and accepts various, interchangeable dome and flat ports for an array of lenses. For full compatibility details, see the port chart. The Dry Lock (DL) port system accommodates lenses with large diameters, and provides added security against leaks at the surface, thanks in large part to the included vacuum valve for checking watertight integrity before the dive. You'll need to pick up the required pump in order to remove excess air and actually create a vacuum.

Depth Rating: 200'    Ikelite 5-Pin Bulkhead Strobe Connector    Manual Flash Exposure, TTL Optional    Mechanical Controls    Access to Nearly All Camera Functions    White ABS/Polycarbonate Body, Clear Back    Interchangeable DL Lens Port System    Ships Without Required Lens Port    Vacuum Valve Included    Made in the USA

• Depth rating of 200'
• Two double-passivated, stainless steel locking latches are corrosion-resistant and virtually unbreakable
• Housing is made by hand in the USA from a corrosion-resistant polycarbonate and ABS plastic blend
• White on the front, top, sides, and bottom to reflect sunlight and keep the camera cool when shooting on or above the water's surface
• Clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera's rear controls
• Housing alone has nearly neutral buoyancy in fresh water, though your choice of lens and port may change the overall buoyancy of the system
• Open-groove design suspends the rear O-ring in the natural position, making maintenance easier and preventing accidental twisting or stretching
• Front-loading mounting plate enables quick camera installation, and does not need to be removed in order for you to gain battery or memory card access
• Mounting plate has a 1/4"-20 threaded hole on the bottom for connection to an optional tripod

• Use of an optional external strobe is highly recommended for color correction and adequate brightness, and basically essential once you descend deeper than 15-20' underwater
• Strobe restores hues that are absorbed by the water, so your images are vibrant and accurate
• Try to stay no more than 3-4' away from your subject to preserve natural colors in images
• Ikelite ICS-5 bulkhead connector with a manual hot shoe connection enables reliable electrical triggering of strobes
• Optional TTL hot shoe and converter, such as Ikelite's CT1K Canon TTL Kit, will enable TTL operation with compatible Ikelite DS strobes, which use the #4103.51 Single and #4103.52 Dual Sync Cords
• Non-Ikelite strobes, such as those from Sea & Sea, INON, and Nikonos, will still work in manual mode only, and can be connected via #4118.1 Single and #4118.2 Dual Sync Cords
• Older non-digital strobes can be used in manual mode via #4103.51 Single and #4103.52 Dual Cords
• Housing ships without a required sync cord for a strobe
• Bulkhead has been moved to the top of the enclosure to keep the cord out of your way and reduce strain on the ends
• Ikelite's #4403 Optical Slave Converter and Aquatica's Water Wizard system are available options that will let you trigger wireless slave strobes
• Exposure compensation is available via the camera's controls

• Sensitive shutter and AF-On levers are curved and extendable, in order to increase comfort when using the optional right-hand grip
• Push-buttons have been modified to reduce weight and salt buildup
• Upgraded soft-touch knobs, including the zoom knob on the side, allow for a better, more comfortable grip with or without gloves
• Ergonomic, mechanical push-buttons, knobs, and levers afford access to all camera functions except for the LCD panel illumination button, depth-of-field preview, dioptric adjustment knob, and multi-function lock
• Control symbols are etched into the back of the housing with lasers, so they won't fade or fall off with time
• Control placement is as close as possible to the layout of functions on the camera, allowing your muscle memory to guide you--so you don't have to learn another set of controls
• LCD monitor can be tilted during camera installation to give you a better viewing angle
• Supereye Viewfinder enhances your view through the camera's OVF when you're wearing a mask
• You can remove the Supereye quickly if you'd like to attach the optional Straight or 45° Magnified Viewfinder instead
• Hard-anodized aluminum tray with a left-hand quick-release grip improves balance and handling, while offering an attachment point for an optional lighting arm
• Optional right-hand grip can be added easily
• 1/4"-20 mounts and other mounting points enable connection to a tripod and the addition of accessories
• Tray is more than 3/4 lb lighter than Ikelite's previous model
• Housing is a 1/2 lb lighter than its FL-mount counterpart
• Another 1/4"-20 threaded mount is located front and center on the housing above the port mount, allowing for the attachment of a focus light, GoPro action camera, or other lightweight piece of equipment
• Spare 1/2-20 threaded port on top of the enclosure allows for the addition of various accessories
• Optional Cable Grip or Aluminum Top Handle can be added for easier carrying if you're using 2 strobes

• Ships without a required lens port
• Accepts all Ikelite Dry Lock (DL) dome and flat ports, enabling you to shoot with a wide variety of lenses
• Zoom and focus gears are available for many lenses
• For complete compatibility details, see the port chart linked above
• DL port system accommodates lenses with large diameters
• Provides added security against leaks at the surface, thanks in large part to the included vacuum valve that helps you check watertight integrity before the dive
• Removal of excess air to create a vacuum requires #47011 Pump with Gauge
• DL mount can be removed and replaced by the older FL (Four Lock) port locks, though this change would be irreversible unless you sent the housing back to Ikelite to have the DL mount installed again

Related Questions and Answers

Q: 1. I have a Canon Rebel T1i w/Ikelite housing. Are the lens ports compatible with this new housing? I have an 8 dome port w/port body and a flat port for my 60mm macro.

A: The older FL ports will not be compatible with the DL port Base. The Base can be removed and replaced with four locks to use your existing ports. Shoot an email to ikelite@ikelite.com for more details on options.

Q: 2. Does this come with the dry port for my 16-35mm 2.8 sony GM lens ? I'm assuming i don't need to buy anything else besides whats mentioned above

A: Lens ports and lens accessories are not included with the purchase of the Ikelite 200DL Underwater Housing for Sony Alpha 1 or a7S III with Dry Lock Port Mount. As different users may use different lenses with the underwater housing, the lens port is not included and must be purchased separately. The Ikelite DL 8" Dome Port for Wide-Angle and Zoom Lenses in DSLR and Mirrorless Housings, B&H # IK75340, the Ikelite DL 28mm Port Extension, B&H # IK75028, the Ikelite DL 50mm Port Extension, B&H # IK75050, and the Ikelite 5509.16 Zoom/Focus Gear, B&H # IK550916, would be the lens accessories needed for use with the Sony FE 16-35mm f/2.8 GM Lens.

Q: 3. Would this be overkill for using the camera in rainy or snowy conditions?

A: The housing is designed to withstand 200ft of water pressure so it'll certainly keep your camera dry in rainy/snowy conditions. That being said, you may find it to be relatively bulky for the application. It would be a good choice if you want to take it underwater eventually.

Q: 4. Hi, is this compatible with the Sony Zeiss FE16-35mm f4 lens and Sony 16-50mm kit lens? Thank you

A: Yes this would work for both lenses

Q: 5. Will this housing fit EF lenses with an adapter or only RF? For example I have the EF 16-35mm f/2.8 iii but not sure if this housing would be compatible.

A: Yes the Canon 16-35 f2.8 Mark 3 EF lens is compatible with the Ikelite 200DL Underwater Housing for Canon EOS R Mirrorless Camera when using the Canon EF to RF adapter.

Q: 6. Does this work with the canon t7?

A: No, the Ikelite 200DL Underwater Housing for Canon EOS Rebel T7i with Dry Lock Port Mount (200') is not compatible for use with the Canon EOS Digital Rebel T7 DSLR Camera. According to Ikelite's website, they do not plan to offer a housing for this camera model.

Q: 7. Is there not a frame or handle that attaches to the base of the housing to hold on to.. or a flash?

A: Yes, the housing ships with a single tray mount and quick release handle. A second (right) quick release handle can be added by incorporating the Quick Release Handle with Extension (4077.02): a href= https://www.ikelite.com/products/quick-release-handle-with-extension?variant=31336950534 target= _blank https://www.ikelite.com/products/quick-release-handle-with-extension?variant=31336950534/a

Q: 8. Do you have to buy an additional cover for longer lenses?

A: Thank you for the inquiry. See the Port Recommendation column of this chart to see supported lenses and their corresponding ports. a href= http://www.ikelite.com/images/products/housings/general/dl-port-charts.pdf target= _blank http://www.ikelite.com/images/products/housings/general/dl-port-charts.pdf/a

Q: 9. ikelite 200DL model adaptable with sony a7r4?

A: The Ikelite 200DL Underwater Housing for Sony Alpha a7R IV and a9 II Mirrorless Digital Cameras, BH # IK71474 would be suitable. https://bhpho.to/3eDUhwv

Q: 10. What lenses are suited for this housing?

A: The lens port chart can be seen here: a href= http://docs.ikelite.com/reference/port-chart-dl-system.pdf target= _blank http://docs.ikelite.com/reference/port-chart-dl-system.pdf/a