Tannoy Studio Monitors With Super Tweeter

Tannoy 5" Full-range Ceiling Loudspeaker With Ict Driver (pre-install, Pair)

Product Code: ga52098
Availability: In Stock

$1,014.00 $1,439.88

Qty

0 reviews Write a review

Description
Reviews (0)

This pair of 5" Full-Range Ceiling Loudspeaker from Tannoy includes two wide-bandwidth, high-power handling, and high-sensitivity loudspeakers built around Tannoy's CMS 3.0 Ceiling Monitor System technology. This speaker has been re-engineered for optimum compatibility with Lab.gruppen commercial amplifiers while also delivering consistent broadband directivity, precise articulation for voice and music, and long-term reliability in installation applications.

The point-source configuration of the ICT driver's mid-bass and tweeter sections ensures a wide and controlled dispersion for optimum coverage, avoiding the significant energy losses in the vertical plane at the crossover frequency that are inherent in typical two-way designs. The ICT (Inductive Coupling Technology) drive unit also addresses two common component failures in background music systems: the tweeter and the crossover. Use of wireless electromagnetic coupling to drive the tweeter means that no crossover is required, making the ICT drive unit exceptionally reliable and ideal for applications where constant heavy usage is the norm. The mineral-loaded polypropylene cone material and nitrile rubber surround further enhance durability and long-term reliability.

The loudspeaker utilizes a 16-Ohm driver, making it ideal for use in high-performance, low-impedance systems. A low insertion-loss 30W transformer is included, with convenient front switching for taps at 30W, 15W, and 7.5W, with an additional 3.75W tap for traditional constant voltage systems. An extra clamp extension accommodates thicker ceiling panels, and a locking design prevents inadvertent over-screwing. The magnetic grille attachment enables easy removal and fitting for custom painting and tapping changes.

Each speaker includes a grille, two tile support rails, and a C-ring. This pre-install model is supplied without a backcan.

71 Hz - 24 kHz Frequency Range at -10 dB ICT Driver 16-Ohm Driver 90° Coverage Angle Magnetic Grille Attachment

Parameters
Low Frequency Driver	5" / 130 mm mineral loaded polypropylene
High Frequency Driver	ICT aluminum dome
Frequency Range	71 Hz to 24 kHz at -10 dB
System Sensitivity	89 dB (1 W = 4 V for 16 Ohms)
Nominal Coverage Angle	90°
Coverage Angle	105°, 1 to 6 kHz
Directivity Factor	5.6 averaged, 1 to 6 kHz
Directivity Index	7.0 averaged, 1 to 6 kHz
Power Handling	Average: 50 W Program: 100 W Peak: 200 W
Recommended Amplifier Power	100 W @ 16 Ohms
Nominal Impedance	16 Ohms
Maximum SPL	Average: 106 dB Peak: 112 dB
Transformer Taps	70 V: 30 W (165 Ohms), 15 W (330 Ohms), 7.5 W (660 Ohms), 3.75 W (1320 Ohms), OFF & low impedance operation 100 V: 30 W (330 Ohms), 15 W (660 Ohms), 7.5 W (1320 Ohms), OFF & low impedance
Crossover	7 kHz inductively coupled
Enclosure	Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating
Safety Features	Safety ring located at rear of enclosure for load bearing safety bond
Clamping Characteristics	Security toggle clamp Clamping Range: 0.37 - 2.36" / 1 - 6 cm Recommended Clamp Torque: 1.5 Nm
Mount	Separate back can for pre-installation
Cable Entry	Cable clamp & squeeze connector for conduit up to 0.9" / 22 mm
Conduit	Conduit Knockouts on PI Backcan Three Sets of Horizontal Positions: 0.75" / 19 mm, 0.87" / 22 mm, and 1.10" / 28 mm
Connectors	Removable locking screw terminals with "loop thru"
Compliance	UL-1480, UL-2043, CE
Dimensions	Bezel Diameter: 8.11" / 20.6 cm Front of Ceiling to Rear of Speaker Unit: 5.2" / 13.2 cm Front of Accessory Back Can Bezel to Top of Safety Loop: 6.0" / 15.4 cm Hole Cutout Diameter: 7.5" / 19 cm
Weight	6.3 lb / 2.9 kg

5" ICT transducer for durability and longevity

High power and high sensitivity with extended frequency response

Wide, controlled, constant directivity dispersion for optimum coverage

Convenient front tapping switch for settings

Magnetically-adhering grille system for easy custom painting

Three-clamp, self-aligning mounting system

UV-resistant baffle and grille

Suitable for: voice alarm systems, multi-zone foreground music & paging systems, boardrooms & offices, business music systems, airports, convention centers, hotels, waiting rooms, houses of worship, retail outlets, shopping malls, lounges, bars, cruise ships, and courtrooms

Related Questions and Answers

Q: 1. Are these speakers suitable for outdoor use in a covered patio?

A: I have them indoors they work fineI have seen them at hair salons tooI'm sure it will be fine as long as water doesn't hit it.

Q: 2. do these work with the sound bar 300?

A: No they do not.

Q: 3. Can these speaker ideal for a Dolby Atmos heights incealling speakers e.g 5.1.4 setup?

A: Yes, these can be used as Atmos speakers.

Q: 4. Is this price for 1 or 2 speakers?

A: Each system is one speaker unit.

Q: 5. Are these speakers compatible with my Pyle Amp. PPA66BT

A: If used as passive speakers, without connecting the included 12V power supply, the pair of Pyle Pro PDICBT87 8.0" Bluetooth Ceiling/Wall Speakers can be used with the Pyle Pro PTA66BT Bluetooth Audio Power Amplifier. When used as passive speakers, the internal Bluetooth feature on the speakers will not be active, but the Bluetooth feature on the amplifier allows Bluetooth audio to be streamed through the speakers.

Q: 6. Are these the Sonance/Sonos 6" or 8" speakers?

A: The Sonos In-Ceiling by Sonance (Pair), B&H # SOINCLGWW1, includes 6" speakers.

Q: 7. Do these install into a standard 8in speaker ring?

A: In the box, these Sonos In-Ceiling by Sonance speakers include a template to cut the correct size hole in your ceiling for mounting. The installation instructions are available in the manual here: https://www.bhphotovideo.com/lit_files/685190.pdf

Q: 8. Can I connect these speakers to MM 3000 Technical Pro Amplifier?

A: Yes you can use the Technical Pro MM3000 with the Pyle PDWP5 speakers.

Q: 9. what is the recommended amplifier power for PIC8E speaker ?

A: The PIC8E speaker is rated at 300 watts peak and 150 watts RMS power at 8 ohms. You will want an amplifier that can supply around 300 watts RMS at 8 ohms per channel.

Q: 10. Is there a diagram or picture of the included wall mounting brackets and instructions for the wall mounting that are available for review?

A: You can see a diagram of the included wall-mount brackets for the Bose Professional FreeSpace 3 Surface-Mount Satellite Loudspeakers and the instructions for installation on pages 3 and 10 of the user manual. https://www.bhphotovideo.com/lit_files/703689.pdf

There are no reviews for this product.