The blue LP-TBRT Low-Profile HDMI Cable Retractor from FSR provides power and connectivity when installed in a separately available Low Profile Table Box or HuddleVU Wall Box. Up to four low-profile cable retractors can be added per box. These slim-style retractors can also be mounted in a horizontal position under a table to save space and provide clearance for seating.

Tangle-Free Cable Management    Hides & Protects Cables When Not in Use    Simple Pull-and-Release System    6' Cable Pulls Out from Top of Retractor    6' Cable Exits from Rear of Retractor    Compatible with Low-Profile Table Boxes    Compatible with HuddleVU Wall Boxes    Mount up to Four Retractors per Box    Can Be Mounted Horizontally under Table    Over 8000-Cycle Life

Low-profile design maximizes under-table space

Stackable design

Retractor life greater than 8000 cycles

Convenient user access

6' cable pulls out from top of the retractor

5' cable exits from rear of the retractor under the table

Related Questions and Answers

Q: 1. Does this version of the Q Block have the protruding nubs for connecting multiple blocks together?

A: No, the Quasar Science Q Low-Profile Block (2-Pack) does not have the nubs to connect them together.

Q: 2. What is the max spread between the mounting screws?

A: Unfortunately, Smallrig does not provide this info. The SmallRig Low-Profile NATO Rail is 90mm long and the screws look like they can be positioned over most of the mount length. We did check and it should be about 57.5mm of space where you can position the screws.

Q: 3. Would this product be compatible with the Rode NTG1 and a DSLR camera?

A: It will connect but it won't work because the Rode needs phantom power. Sennheiser's mke 600 works because it doesn't require phantom power. (it can run with a battery).

Q: 4. Does this work with my Tentacle Track E when connecting a Mic with a 48V supplied by BH #XVP1?

A: Yes, the Cable Techniques 3.5mm TRS to Low-Profile XLRF Cable can be used with the Xvive Audio P1 Portable Phantom Power Supply and the Tentacle Sync TRACK E Pocket Audio Recorder.

Q: 5. Any idea what the max load is for this nato rail? I have it on top of my camera cage and I use it with a Nato top handle.

A: Max payload is not listed by the manufacture for this product, but if you tighten the screws provided with the nato rail to the cage, holding 10+ pounds should not be an issue.

Q: 6. Is this compatible for use as an AES/EBU digital cable?

A: The Cable Techniques CT-LPS-3TMX Low-Profile TA3F to LXPXLR-3M Cable is designed to pass analog audio signals and will not likely pass digital signals in the same manner.

Q: 7. Will this work with a Sachtler 18 head?

A: The Matthews Low-Profile Mitchell Tie-Down is compatible with the Sachtler 18 fluid head.

Q: 8. What is the weight of this item in grams?

A: The ARTCISE XB54 Low-Profile Ball Head weighs 608.3 grams.

Q: 9. Does it support 4K 120 Hz???

A: Yes the FSR DR-H2.1-10M has 48 Gbps bandwidth, supporting 8K at 60Hz or 4K at 120Hz.

Q: 10. Are accessories releasable from either end?

A: Yes, you can release accessories from either end of the SmallRig Low-Profile NATO Rail (2.8").