Designed for mobile filmmakers, the Samson Go Mic Mobile System provides both a dual-channel receiver and a transmitter in the form of an LM8 lavalier and belt pack transmitter. The receiver, which is dual-channel, can mount directly to your smartphone or DSLR camera, and allow you to transmit 48 kHz audio directly to the destination of your choosing.

The receiver itself plugs directly into iOS devices with the included micro-USB to Lightning cable, though it can also communicate with other devices utilizing either micro-USB or USB-C cables. Once the transmitter and receiver are paired, low-latency audio streams from one to the other without sync issues. The system works at distances of up to 100’ line of sight, operating on the 2.4 GHz frequency band, and giving you a frequency response of 10 Hz to 22 kHz for high-quality audio capture.

With the LM8 lavalier and included belt pack transmitter, you'll have a discreet, low-profile microphone, as well as freedom of movement. The system’s rechargeable lithium-ion battery can last up to 12 hours, doing so without draining the battery of your smartphone. Included in the Go Mic Mobile are a 3.5mm headphone/line-out cable for monitoring, as well as a shoe mount adapter.

Note: The Samson Go Mic Mobile offers digital audio compatibility with Android devices running Android 5.0 (Lollipop) or later that allow USB digital audio connectivity. Not all Android applications support USB audio, and you may need to download a third-party app to use this feature. Analog connectivity via the included 1/8" (3.5mm) cable is offered as an alternative solution.

Digital Wireless System with Lavalier    Go Mic Mobile Handheld Q8 Transmitter    Premium Square Mic Flag    Dual TRRS Inputs & Headphone Output    WMC-100 Wide Mouth Case    4 x Premium Foam Windscreens for Mics    Includes Lightning Cable    USB Charging Cable    Shoe Mount Adapter and Clothing Clip    3.5mm Audio Cable

• 2.4 GHz digital wireless system
• Low-latency audio transmission with no video sync issues
• Dual-channel receiver mounts directly to smartphones or cameras via included shoe mount adapter
• Plugs directly into iPhone and other iOS devices via included micro-USB to Lightning cable
• Plugs directly into Android devices via USB to micro-USB, or micro-USB to USB Type-C cables
• Receiver offers up to 12 hours of battery life via rechargeable lithium-ion battery
• Frequency response of 10 Hz to 22 kHz
• Switchable 3.5mm headphone/line and USB audio outputs with volume control
• LM8 lavalier and belt pack transmitter
• 100' operating range (line of sight)
• Up to three simultaneous systems, for six total transmitters
• USB charge cable, 3.5mm audio cable, and power adapter also included

Related Questions and Answers

Q: 1. I need a mic to do interviews with my fuji xt2, will this work?

A: This mic would work well with your camera, but a receiver is required as well. The Samson Go Mic Mobile Digital Wireless System with Q8 Dynamic Handheld Mic/Transmitter, BH #SASWGMMSHHQ8 would have everything you need to connect the wireless mic to the Fujifilm XT2 camera.

Q: 2. Can you use the Samson Go Mic Mobile during a Facebook Live stream?

A: yes. One word of warning. its a 10 mW transmitter Its on 2.4 GHz . Physics 101 its the microwave band. so its 100% line of sight. if you have *nothing* between the RX and TX its a very good mic . the moment you put body mass between it the thing is useless . lav belt packs are made for the back on your belt ect. It was unusable facing the cam 20 feet away! . the hand mic as its in front might be OK. Still the fact it was blocked was a deal breaker. had I known it was a wimnpy 10 mW of RF then I would have never bought it . I ended up buying a VHF pro-88 It does get a tad fuzzy at 100 Feet away but with in 30 feet its super solid. 150 mW RF and as its analog its nor a sudden drop off .

Q: 3. Does the receiver accept a line level input?

A: The receiver included with the Samson Go Mic Mobile Digital Wireless System can send a line level output signal when the output selector switch is set for headphones. The audio from the transmitter is sent wirelessly to the receiver so there is no physical input connection on the receiver. The transmitter is designed for mic level input.

Q: 4. Hi there, does anyone know if this is an updated model from the one that B&H sells for $99 ? ... The other model is Samson Stage XPD1 Presentation USB Digital Wireless System -- thanks for any help.

A: It's a different model and we sell them both. You seem to be confusing two different systems. B&H # SASWXPD1BLM5 is the single channel system with the USB receiver.B&H # SASWGMMSHLM8 is the dual channel system The receiver itself plugs directly into iOS devices with the included micro-USB to Lightning cable, though it can also communicate with other devices utilizing either micro-USB or USB-C cables.

Q: 5. Is there a cord I can buy that will plug into the transmitter (instead of the lav microphone) so i can tap into a sound board and record audio wirelessly directly to the camera?

A: Use this cable/adapter: Sescom SES-43DB-# 43 dB Pad DSLR Attenuating Line to Mic Level Cable (18") BH #SES43DBMZ2P: https://bhpho.to/2v5XQrR

Q: 6. Will the Samson RDX2 receiver pair with the PXD2 wireless Go mic transmitter? Thanks

A: This is the receiver for that bodypack. https://www.bhphotovideo.com/c/product/1502496-REG/samson_swgmmr_go_mic_mobile_receiver.html

Q: 7. Can you transmit to two receivers? I'd like to receive the transmission at my camera as well as the house sound mixer.

A: I am not positive but it would seem that two receivers both set to the same channel should receive the same signal from one transmitter set to that channel. I too will appreciate the answer to this. I can try it for you but I won't be back at my equipment for about three weeks.

Q: 8. Can I do real time audio monitoring?

A: When sending audio out of the Samson Go Mic Mobile Digital Wireless System with Q8 Dynamic Handheld Mic/Transmitter via the Micro-USB connection, the onboard 1/8" output can be used to monitor audio in real time. If the 1/8" output is needed to send audio to another device, monitoring would need to be done via a headphone output on the device connected.

Q: 9. Is there a mobile Gimbal that works with this Receiver attached to the back of the phone? Most block the lightning / usb-c port

A: I bought a longer USB-C to lightning cable and rubber banded the receiver to the gimbal handle. It barely works due to the weight.

Q: 10. Will this product work with the Canon Vixia HF G70 UHD 4K Camcorder and if so does it need any additional accessories?

A: Yes, the Samson Go Mic Mobile Digital Wireless System with Q8 Dynamic Handheld Mic/Transmitter is compatible for use with the Canon Vixia HF G70 UHD 4K Camcorder. The system includes a 3.5mm audio cable that you can use to connect the output from the wireless receiver to the mic input on the camera. Other than two AA batteries for the Q8 Mic/Transmitter, no additional accessories are required to use the system.