The Single Socket Fluorescent Fixture from Impact is a lightweight fixture in a polycarbonate housing designed to accept Edison-base compact fluorescent lamps. It can be used with up to 105W CFL bulbs. The fixture's bracket tilts and locks into position and features a standard 5/8" receiver that mounts on any 5/8" stud or accessory.

Two Single-Socket Fixtures    Two 50 x 50cm Softboxes    Two 60W LED Daylight Studio Bulbs    Two 6' Light Stands    6 x 7' Chroma Green Background

Related Questions and Answers

Q: 1. tungsten bulbs?

A: Fluorescent bulbs. You can use tungsten, they will just get a lot hotter and have a different color (more yellow) than the Fluorescent. You can use brighter bulbs than the one's that are supplied too.

Q: 2. Can I use halogen flood light bulbs in this set up?

A: Yes, but end-user must be mindful that Impact Daylight Two-Floodlight Light Kit can only handle a 500 watt bulbs only.

Q: 3. The FF-OF4 is 100-240 vac, however the 4 Socket Fluorescent Fixture is only 120 vac. I need light that all run at 220v, why would a kit have a setup that is not both 100-240vac?

A: This 3 Light Fluorescent Kit. The Impact FF-S4 Three Light Daylight Softbox Light Kit B&H # IMFFOF43LSBK (B&H Kit) is dual voltage 100-240 vac.

Q: 4. Are these lights flicker free? Thank you!

A: Unfortunately, these lights are not flicker free.

Q: 5. I don't know how to assemble this (Impact_FL1000_KI_Daylight_Floodlight_Kit). Is there an instruction sheet or diagram?

A: The Porcelain socket has a ring like a nut that you unscrew. You take that off slide the reflector on and then screw that part back on to keep the reflector securely attached to the socket.This is a link to a photo of the socket with the silver part (nut) you need to unscrew http://bit.ly/1LI32Dz.

Q: 6. Can ther hook up to a remote fash? If so, which remote do you recommend?

A: This is a continuous light kit, therefore it cannot sync with the cameras as done with a flash.

Q: 7. What is the actual max wattage? the listing says 50w/bulb for a total of 200w. but the product manual says 150w/bulb for a max of 600w. but the sets come with 32w bulbs. so what is actual max the light head can handle without, ya know, blowing up?

A: It is important to note that there is a difference between the actual draw and the equivalent outputs. This fixture can handle up to 4x 50w E26 lamps worth of actual draw.

Q: 8. Does this fit Bowens mount softboxes?

A: Unfortunately, no, the Impact 4 Socket Fluorescent Fixture is not compatible for use with Bowens-mount softboxes. The Impact Softbox for Fluorescent Fixtures (20 x 27.5"), B&H # IMFFSB70, would be the dedicated softbox compatible for use with the Impact 4 Socket Fluorescent Fixture. The Impact 4 Socket Fluorescent Fixture cannot use Bowens speed ring adapters.

Q: 9. Is this light dangerous to my skin if I shoot often ? Do fluorescent lights emit uv light and dangerous for skin ?

A: The Impact FF-S4 3-Light Daylight Softbox Light Kit should be fine for standard still photography and video usage needs. However, if you will be shooting with the lights positioned closer than approximately 10 inches (30 cm) from your subject without moving for longer than 6 hours a day, then you may wish to purchase replacement lamps such as the ALZO 15W Joyous Light Dimmable Full-Spectrum LED Bulb (5500K, 4-Pack), B&H # AL275504DIFS • MFR # 2007-55-04-DI-FS, for your usage needs.

Q: 10. In the pictures provided for this product it shows the product being used with a soft box. Is that soft box included with this product along with the stand? The portion where it says In the box provides no information regarding either or.

A: Hi John,Yes, the Box set I got came with the soft box and the stand. Hope that helps.Thanks.