This Flood Holographic Film Lens from Nila is an accessory for the Varsa V2 LED fixture. Its diameter is approximately 7" and it fits in the built-in slot at the front of the light. This lens allows you to use a color gel and barndoors simultaneously. Its 80° beam angle creates a very wide light projection ideal for illuminating large spaces.

80° Beam Angle    7" Diameter    Allows Use of Barndoors and Color Gel

Related Questions and Answers

Q: 1. I am looking for parts for a light kit a replacement adapter and parts for a MOVO Photo wmx 20 camera mount wireless lavalier microphone, the shoe mount and wind screens?

A: For replacement parts to use with the Movo Photo WMX-20 Camera-Mount Wireless Lavalier Microphone System, you can use the Revo Hot Shoe to 1/4"-20 Male Post Adapter (B&H # RESACS14M) and the Auray Foam Windscreen for 1/4" Diameter Microphones 3-Pack (B&H # AUWLF0143).

Q: 2. What battery would power this?

A: There is no battery option, the Nila Boxer Daylight LED Fixture (No Accessories Included) is an AC powered light.

Q: 3. How far out will this set light up something? What is the drop off in feet?

A: The drop off with all light sources are exactly the same; they are bound by the inverse square law. The inverse square law states that the power of the light will be inversely proportional to the square of the distance. So if you take a distance of 2 meters and square it, you get 4, the inverse of which would be 1/4 or rather, a quarter of the original light output power - not half. Simply put, if you double the original distance, the light is as strong as it was at the original distance.If you move the subject 3 meters from the light (3 * 3 = 9, so the inverse is 1/9th) the power of the light source now becomes 1/9th of what it originally was.At 4 meters away, the light is 1/16th its power compared to 1 meter away (4 *4 = 16, so the inverse is 1/16th). The above remains true with all light sources. The best I can recommend is to Google the inverse square law and lighting, as I cannot get into it here. But using the above as an example, if the ikan iLED312-V2 gave you an exposure setting of f/4 1/125 sec ISO 100 or f/11 1/60 sec ISO 400 at 20 inches (just under 2 feet), if you doubled the distance (40 inches, or just over 3 feet), equivalent settings for proper exposure would be f/4 1/30 sec ISO 100, f/11 1/8 sec ISO 400, or if you wanted the same aperture/shutter setting and instead changed the ISO, you may use f/4 1/125 sec ISO 400 or f/11 1/60 sec ISO 1600. At 80 inches (or just over 6.5 feet), you may use f/4 1/8 sec ISO 100 or f/11 sec ISO 400. If you wanted the same aperture/shutter setting and instead changed the ISO, you may use f/4 1/125 sec ISO 1600 or f/11 1/60 sec ISO 6400.

Q: 4. DOES THIS LIGHTS COME WITH THE BARN DOORS SHOWN IN THE PICTURE?

A: yes it does. they work fine

Q: 5. Does this kit come with the bags shown?

A: The lights did not come with individual bag but it did come with a nice case that holds everything well and securely. The lights work great.

Q: 6. Can this unit run off of AC power?

A: Yes. They come with everything you need. I'll also add that the two batteries on each unit run well past 2.5 hours. I did a recent time test and stopped at 2.5, because my upcoming interviews would not run longer than that. Probably another hour or two on top of that I'll bet.

Q: 7. Can you attach umbrella's to these lights?

A: Phil, typical umbrella's aren't going to fit the iLED312-v2, if you really want to try and use them with this light, you will need an aftermarket clamp.

Q: 8. How many lumens?

A: For the Varsa v2 Delux bi color 13,000 lux measured at 1 meter covering a 3 meter circle is what Nila publishes on their site.

Q: 9. What are the dimensions of this folded?

A: The softbox when collapsed and not put together is about 23 x 14 x 4.2 inches.

Q: 10. D tap to run off a Battery ?

A: Yes, for your DC power needs please review the following item. Nila Battery Adapter Plate (V-Mount) BH #NINBTVM • MFR #NBTVM https://www.bhphotovideo.com/c/product/1247162-REG/nila_nbtvm_v_mount_battery_adapter_plate.html