Extend full-bandwidth HDMI 2.0 with HDR up to 264' over a single Cat 5 or better cable with the 4K Ultra-HD 600 MHz HDBaseT Extender Set from Gefen, supporting 18.2 Gb/s of data throughout and 600 MHz TMDS clock frequency. Featuring HDBaseT technology as well as Gefen's compression algorithms with high peak signal-to-noise ratio, this extender set accommodates resolutions up to 4K Cinema-DCI and 4K Ultra-HD with high dynamic range. HDR delivers greater contrast between light and dark areas of a video image, resulting in enhanced picture quality and color depth.

This extender set supports both HDCP 2.2 and HDCP 1.4 encryption, as well as 1080p full HD, WUXGA 1920 x 1200, 3DTV, and Deep Color at up to 1080p resolution. High-performance multichannel digital audio, including 7.1 channels of LPCM and HBR digital audio formats such as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio, are passed through to the HDMI outputs. The GTB-UHD600-HBT provides RS-232 and two-way IR extension between sender and receiver, facilitating the control of A/V sources placed near the sender and sending automation commands to the display or another device placed near the receiver.

Gefen's bidirectional PoL technology powers the sender or the receiver unit using the same cable that extends the HDMI signal. Only one of the two units needs to be fed by a power supply. This feature simplifies installation when no electrical outlets are available near the source or the display. Small and low-profile, the sender and receiver enclosures can be securely surface-mounted and hidden away from sight. They accommodate locking HDMI cables (included).

4K DCI & Ultra-HD HDMI Signal Extender    HDR for Image Quality & Color Depth    Transmits 4K DCI & Ultra-HD Up to 264'    1080p & WUXGA Up to 300'    PoL: Power Both Units with 1 PSU    Bidirectional IR Control    IR Emitter & Extender Included    HDCP-Compliant    18.2 Gb/s Bandwidth    Supports Dolby TrueHD & DTS-HD Audio

Supports 18.2 Gb/s bandwidth and 600 MHz TMDS clock

Extends HDMI, RS-232 & bidirectional IR over a single Cat 5e or Cat 6a cable

HDMI features supported:

• HDMI 2.0, full bandwidth to 18 Gb/s / 600 MHz
• HDR 10-bit Deep Color at 4K 60 Hz 4:2:0 and 4K 24 Hz 4:4:4
• HDCP 2.2 and 1.4
• 12-bit Deep Color at 1080p
• Uncompressed LPCM digital audio up to 7.1 channels
• HBR (High Bit Rate) digital audio up to 7.1 channels, including Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio
• 3DTV pass-through
• CEC pass-through
• Lip Sync pass-through

Supports the use of DVI sources and DVI displays up to 1080p Full HD and WUXGA (1920 x 1200), with Gefen CAB-DVI2HDMI-LCK DVI-to-HDMI cables (available separately)

RS-232 two-way link between sender and receiver

IR extension from sender to receiver and from receiver to sender

Bidirectional PoL provides power to the sender or the receiver unit over the link cable—only one side needs external power

Uses Gefen's implementation of HDBaseT technology with proprietary algorithms and enhanced features

Advanced EDID management

Firmware updatable via RS-232

Locking power connector

Surface mountable

Plug & play—no configuration or setup required for most applications

Compact sender and receiver enclosures are easy to install and can be hidden away

Related Questions and Answers

Q: 1. Can an output be connected from one unit to an input on a second identical unit?

A: While we are not sure of the application this would used for, that should be possible.

Q: 2. Does this product allow to control video wall? (to show one image splitted on 4 motitors) Or it only shows the same image on al

A: The Gefen UHD 4K 600 MHz 1x4 HDMI Splitter with HDR Support (4K, 60 Hz, 4:4:4) does not have any video wall features at this time.

Q: 3. Does EXT-UHD600-41 support Dolby Vision?

A: According to Gefen it will support Dolby Vision, in Pass Through Mode.

Q: 4. Can it extend the display from any input? For example, a PS5 split across 2 TV's.

A: Yes, you could route from any HDMI input to any of the four HDMI outputs when using the Gefen 4K Ultra HD 600 MHz 4x4 Matrix Switcher with Audio De-Embedder. More info from Gefen: https://bit.ly/3NhipYy

Q: 5. I have a receiver setup of 5.1.4 Atmos. What will happen to the audio signal when passing through this device on a movie that contains atmos. I noticed that the device only supports 7.1.?

A: This supports up to 7.1 channels, which would tend to mean it will support lower options as well. It should work fine with the Atmos you have.

Q: 6. Does it create seamless cuts or is there some delay resulting in lost of signal for a second?

A: There is no visible delay when you cut with this device.

Q: 7. What is the proper signal receiver for this transmitter?

A: The Ocean Matrix 4K HDMI over HDBaseT 2.0 USB KVM Receiver with Two-Way IR, RS-232, CEC & PoC would be a good pick. See: https://www.bhphotovideo.com/c/product/1585354-REG/ocean_matrix_omx_01hmbt0003_r_4k_hdmi_over_hdbaset.html

Q: 8. Would this splitter take a direct signal from a Mackbook pro with USB-C out using the HDMI adapter?

A: Yes, that should be possible. Just as long as you have the adapter to convert the signal to HDMI, B&H # APMJ1K2AMA. https://bhpho.to/2AfUvaV

Q: 9. How clean is the switching on this unit?

A: It will not be clean when switching between inputs and outputs on this Matrix Switcher. For that you would need to look in to seamless switcher. We offer B&H # GEHDSL444, which is a 4x4 Seamless Matrix for HDMI from Gefen.https://bhpho.to/2vhS6I4

Q: 10. Do all the inputs need to have the same resolution?

A: No. Each input can be different