Travel to your fishing destination confident that your valuable fly rods are safe with the iSeries Fly Fishing Case from SKB. This gasket-sealed, polypropylene copolymer resin case is waterproof, dustproof and impact resistant to military standards and is fitted with wheels for easy transport through airports and hotel lobbies. It holds four fly rod tubes up to 36" and two reels, all protected in a layered foam-rubber interior. There's also a 25.5 x 14 x 2.75" space where you can store stockingfoot waders, a net, a rain jacket, etc.

The case has stainless-steel padlock-protecting holes and SKB's patented Trigger Release latch system. It's fitted with an ambient pressure equalization valve and is resistant to UV radiation, solvents, corrosion, and fungus.

Holds Four Rod Tubes up to 36"    Space for Two Reels    Layered Foam Padding    In-Line Skate-Style Wheels    Stainless-Steel Padlock Holes    O-Ring Watertight & Dustproof    Impact & Corrosion Resistant    25.5 x 14 x 2.75" Storage Space    Trigger Release Latch System    Cushion Grip Handle

• Gasket-sealed waterproof & dustproof
• Layered foam interior
• Room for four 36" fly rod tubes & two reels
• Storage space for folded stockingfoot waders, rain jacket, net, etcFour SBG Trigger Release latches
• Latches can be retrofitted with TSA-accepted key locking latches
• Padlock holes with stainless-steel padlock protector clips
• Molded-in hinge for added protection

• Waterproof and dustproof to MIL-C-4150J

• Impact resistant to MIL-STD-810F

• Resistant to UV, solvents, corrosion & fungus to MIL-STD-810F

• Ambient pressure valve meets MIL-STD-648C

Related Questions and Answers

Q: 1. Would the Tokina Cinema Vistas fit in this case?

A: No, the Tokina Cinema Vistas exceed the maximum length of 155mm per lens slot.

Q: 2. Do you have a hard case for lenses of 95mm diameter? Thank you

A: We do not have any lens cases taht specifically say that they accommodate 95mm diameter lenses. This fits lenses up to 125mm in diameter. if you have lenses that are 95mm they will fit. If you want a case with a more snug fit then you may want to check if there are customized case solutions for your particular lens set.

Q: 3. Anyone use this case with the Rokinon Cine DS Lenses? Especially the 135mm?

A: I have the Rokinon Cine DS lenses up thru 85mm and they fit great in this case. I also have the Canon 24-70 which measures almost 5.5 inches long with the caps on, and it fits fine, too. I would not go much longer than that. You might get away with 6 to 6.5 inches long but it would be tight.

Q: 4. Will this fit the PL mount Sumire primes from Canon?

A: Yes, the SKB iSeries Watertight Lens Case can house the Canon Sumire Prime Lenses. The case can fit lenses that are up to 125mm in diameter and a base depth of 120mm. The Canon Sumire Prime Lenses fit these requirements.

Q: 5. Will it fit the Zeiss CP.3 135 and 100mm cine lenses?

A: SKB iSeries Watertight Lens Case is made for Cine lenses with an outer diameter of 125mm. Zeiss CP.3 XD 135mm T2.1 and 100mm T2.1 Compact Prime have a smaller outer diameter, therefore the lens won't be safely snuggle in the precut foam. I would recommend getting the case with a customizable cube foam.

Q: 6. Is the rack part available for purchase seperately, and if so, what is the SKU?

A: Unfortunately not, the inner rack chassis is not available separately.

Q: 7. Will this fit a Cranborne 500R8 with its rubber feet?

A: Yes, the SKB iSeries Injection-Molded 9" Fly Rack (4 RU) will fit a Cranborne 500R8 with rubber feet.

Q: 8. Some of the pictures show these racks with the sides pieces off and some on. The plastic side panels appear to be sitting in a groove, what's the best way to remove the side panels without damaging them?

A: The side panels on the SKB iSeries Injection-Molded Fly Rack - 6 RU, 13" Rack Depth (B&H # SK3I2317M146) are not removable - and doing so will void your limited lifetime warranty. SKB does offer different configurations of their fly rack and some models do have open front, back, and sides, such as the SKB iSeries Injection-Molded Fly Rack - 6 RU, 20" Rack Depth (B&H # SK3I2424M146). If you look at the actual frame of the rack, you can see that there are differences in construction.

Q: 9. Does this fit the blackmagic atem switchers? They are 19" across. New to this so don't know what the standard size(s) and this doesn't show any indication it will work for standard rack mounted blackmagic hardware.

A: Hello Armando Yes, it will fit for the standard BlackMagic hardware.

Q: 10. How well does thius fit the Mackie DL-1608? Looks like it will work fine...

A: The case has Custom-cut PE foam to fit the QSC TouchMix-8. It has a removable foam section to fit the TouchMix-16. I would advise getting a case that was designed for the Mackie as well.