Using the 2.4 GHz Godox X wireless radio system, the XProF TTL Wireless Flash Trigger can be used to effectively and reliably trigger flashes from up to 328' away, and when used with compatible flashes and receivers users will have the added benefit of remote power control. This model is compatible with Fujifilm's TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control options along with settings for working with system-specific features. For ensuring maximum reliability and control, users can set up 16 groups on one of 32 channels and can then access 99 wireless ID settings for limiting interference from other nearby systems.

In addition to basic manual and TTL control modes, other settings are available, including stroboscopic flash and second-curtain sync. Users can adjust flash exposure compensation from -3 to +3 EV as well as wirelessly control the modeling light, zoom setting, and more. For using the XProF with other camera systems there is a 2.5mm sync port that supports triggering via a wired connection. Also, a USB Type-C port is present for firmware updates and the devices run on two AA batteries for convenience.

Works with X Wireless Radio System    Compatible with Fujifilm TTL    Frequency: 2.4 GHz    Range: 328'    32 Channels; 16 Groups; Wireless ID    Remote Power Control for Select Flashes    Backlit LCD Panel    High-Speed, 1st & 2nd Curtain Sync    2.5mm Sync Port; USB Type-C Port    Runs on Two AA Batteries

Related Questions and Answers

Q: 1. Does it have a AF assist beam?? I´ll use it on the A7III

A: Yes it has , the off/on switch in front will help with focus assist

Q: 2. Will this trigger non-Godox flashes; for example, an Interfit S1 monolight?

A: No

Q: 3. Will this work with HVL-F45RM unit?

A: You would need to add this receiver, Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony B&H # GOX1RS MFR # X1R-S But unfortunately, it will Not support TTL or HSS, its only a manual trigger.

Q: 4. Will this control Profoto lights? Just like the profoto air?

A: It will, if you pair the Profoto light unit (or any other brand flash unit that has a sync port) with another one of these or another Godox remote attached by a sync cord. But, you'll have to manually walk over to the light and adjust your settings. The Godox remote will not manage the output of the light, other than fire it.

Q: 5. I recently switched from Canon to Sony. I have two Yongnuo 600ex-rtII flashes will they work with this trigger on my Sony a7iii? Thank you

A: The YN600EXRT are designed to work with Canon Proprietary radio signals. They will not work with a Sony/Godox combination unless you buy receivers and use them in manual only.

Q: 6. Will this work with a Canon 580ex?

A: No, you would need a flash with a radio signal built in or you can attach a Godox radio receiver to the flash.

Q: 7. It came to my mind that B&H don't offer AD200/XProS for Sony bundle, just for Nikon and Canon. Will the XProS fully control an AD200 flash? Manual power output and everything else? This is important, otherwise I will stick with the X1T-S.

A: It controls everything on the AD200, and even the modeling lamp. Its a nice upgrade from X1T-S

Q: 8. Hi. Which Godox flashes is the Xpro P compatible with? I have the AD600BM and AD360 MK One

A: Being that both the AD600BM and the AD360 have the Godox X series receiver built in, you may trigger them using the XProP transmitter placed on your Pentax camera.

Q: 9. Will this trigger a TT685C or does it only work with the Sony version?

A: Yes only works for trigger - if this is a Sony model

Q: 10. Will this work with a canon 600 ex rt ii without having to add a receiver to it since it does have wireless built in?

A: No, it will not; Canon and Godox use different wireless radio communication and are not directly compatible with one another. The Godox XProC TTL Wireless Flash Trigger for Canon Cameras will only directly communicate with the radio receiver built into Godox-branded flahes/studio strobes or by using the Godox wireless radio receiver such as the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon, B&H # GOX1RC. The Canon 600EX RT-II Speedlite Flash built-in radio receiver is only compatible for use with the Canon wireless transmitter, the Canon Speedlite Transmitter ST-E3-RT (Ver. 2), B&H # CASTE3RTV2, the Yongnuo YN-E3-RT II Wireless Speedlite Transmitter for Canon, B&H # YOYNE3RTII, or the Westcott FJ-X2m Universal Flash Trigger for FJ400 Strobe, B&H # WEFJX2MUWLFT.