Camera Stabilizer Bushing

Heden 19mm To 15mm Reduction Bushing

Product Code: ga52639
Availability: In Stock

$150.00 $187.50

Qty

3 reviews Write a review

Description
Reviews (3)

Use the HEDEN 19mm to 15mm Reduction Bushing to mount lens control motors, which conventionally use 19mm rod clamps, to 15mm rods. This bushing is color coded to prevent confusion with different sized bushings.

Mount 19mm Motor on 15mm Rods Color Coded Grey

Parameters
Outer Diameter	19 mm
Inner Diameter	15 mm
Packaging Info
Package Weight	0.2 lb
Box Dimensions (LxWxH)	5.5 x 4 x 0.2"

Related Questions and Answers

Q: 1. On the arms are there Arri pin mounting points on both the inside and the outside? I can see them on the outside however image is not clear enough to see the reverse side of the arm.

A: Yes, There are ARRI mounting points on the inside and the outside of each extension arm. There are 4 in total.

Q: 2. can I map the lens on this unit?

A: Yes, as per product description: A key feature of the YMER system is HEDEN's LenSaver Calibration, which provides a simple and effective way of calibrating for follow focus.

Q: 3. Is this compatible with the Wooden Camera 15mm LWS Baseplate for RED KOMODO? I think it is, but just want to be sure.

A: The Bright Tangerine KASBAH 15mm LWS/19mm Studio Handle Kit BH #BR15LWS19HKT • MFR #B6000.0001 should work with the Wooden Camera 15mm LWS Baseplate for RED KOMODO. We feel the Bright Tangerine KASBAH Shoulder Pad System may not.

Q: 4. 15mm or 19mm?

A: This is for 15mm rod.

Q: 5. any likelihood of frequency issues in other parts of the world?

A: We are not aware of any issues you may face. However with any wireless device this will be determined on what other signals are being used in the area.

Q: 6. What are the power requirements (amps/watts) to operate this motor?

A: HEDEN offers a D-Tap Power Cable for this motor, B&H # HEAC51. As long as you have this cable and a battery with a D-Tap Accessory Port you will be able to properly power the motor. B&H # HEAC51 - https://bhpho.to/2I4xw7B Battery Option - https://bhpho.to/2mzvEZW

Q: 7. Does anyone know what this piece is for?

A: This is made to fit a truss section in order to hang a light or accessory with a 5/8" baby pin attached to it.

Q: 8. What is the overall weight?

A: The overall weight of the Bright Tangerine KASBAH 15mm LWS/15mm Studio Handle Kit is 2lbs.

Q: 9. Is there any way to change the height? I know several other mid-range swing away matte boxes like this the lens sits a few millimeters above the opening. Especially when using a bigger lens.

A: Yes the height is adjustable.

Q: 10. What Country is this product manufactured ?

A: The Country of Origin for this product is Sweden.

MJP	01/07/2024
Product came and went right to use. excellent eyepiece, well made and heavy. when you hold it and look at it you can feel and see the quality. 82% field of view and clear. I am very pleased with this piece and also have the 7mm, 1.25inch piece which is equally as good. 5

Gerald	13/04/2024
This eyepiece offers a wide field of view which enhances the immersion experience. You are not just only looking at stars you feel surrounded by them. I don't wear eyeglasses but they have good focal relief and retractable eye cups. 5

Jimmie	11/04/2024
I should have taken a picture with it. It is a nice visual eyepiece and I found it excellent when holding my eye with it screwed up just enough where my eyelashes do not touch it. I bought it for wide angle views and in my f/7 102mm triplet the Pleiades fit it at 37x, in my f/5 reflector it catches the whole cluster easily. With no coma corrector the Double Cluster in Perseus came in with barely any star stretching, but I had my primary mirror refigured to a high 1/12th wave of light and .98 Strehl and it was near perfect. I looked at M42 Orion Nebula with the Luminos 2.5x Barlow at 94x and felt like it was all around with a Neodymium Moon and Skyglow filter. Then looked at the 25% waxing Moon and the terminator came in near perfectly at 94x, but for Jupiter I'd need to change eyepieces though I can see the bands and moons I'd need a 4x or a 5x Barlow to zoom in closer, but this isn't a planetary eyepiece. Although in my f/7 102 Sigma Orionis was next to perfect with its multiple stars that at 94x all 4 stars fit in the FOV I tried other multiple stars and got all 3 of Mizar's stars as well. Excellent eyepiece and worked well with the Luminos Barlow as well, it was like they were made for each other (I think they were). 5