Ethernet Wifi Adapter Dhcp Server

Triplett Camview Ip Pro+ 8073 Camera Tester With Dhcp Server

Product Code: ga52872
Availability: In Stock

$1,910.85 $2,407.67

Qty

0 reviews Write a review

Description
Reviews (0)

Test your network, AHD, and HD-TVI cameras with the CamView IP Pro+ 8073 Camera Tester with DHCP Server from Triplett. This device features a 4" TFT display for seamless navigation. A built-in DHCP server enables this camera tester to work with or without a network connection. Additionally, the DHCP server allows you to set and assign IP addresses to cameras, auto-detect IP settings on networks, and ping, sniff, and list subnets.

This device can perform RS-485 PTZ control tests, as well as power network cameras via PoE, and analog cameras via 12 VDC power. It also performs TDR cable tests, Ethernet link tests, packet loss tests, and Ethernet loop detection. The tester is ONVIF-compliant for version 2.4.1 or higher to improve interoperability across devices and is equipped with 8GB internal flash storage.

4" TFT Screen with 800 x 480 Resolution Tests Network, AHD, and HD-TVI Cameras Built-In DHCP Server Discover, View, and Configure Cameras TDR Cable Testing RS-485 PTZ Control Test RJ45 PoE Injector ONVIF-Compliant, 2.4.1 or Higher 8GB Internal Flash Storage

General Specifications
Compatible Cameras	Network, AHD, HD-TVI, HD-CVI
Signal Format	NTSC/PAL
HD Video Format Options	AHD 2.0, HD-TVI 3.0, and HD-CVI 3.0
Resolutions	Analog: 704 x 480 (D1), 1280 x 720 (720p), 1920 x 1080 (1080p)
Signal Level	1 V p-p
Camera Test	Analog: Real-time video, PTZ control, audio test, full-screen preview, and 8x digital zoom; snapshot, record video
Network Protocols	ONVIF 2.4.1 or higher, RTSP, RTP
Ethernet	Tests: 10M/100M/1G Ethernet link test, loop detect, Ethernet traffic flow monitor, link quality test
IP Configuration	Static IP, DHCP client, DHCP server
IP Camera Test	Discover camera, real-time video, camera configuration, PTZ control, audio test, full screen preview, 8x digital zoom, snapshot, record video (recording original data stream), store ONVIF camera reports
PTZ Protocols	More than 30 protocols including Dahua, Pelco D/P, Samsung, Panasonic, Lilin, Yaan
Baud Rate	150, 300, 600, 1200, 2400, 4800, 9600, 19,200 bps
Detection	TDR Tests: 0-492' / 0-150 m network cable length measurement (resolution 1 m), cable pair status PTZ Test: Data monitor to detect RS-485 communication from control room console to camera PoE Tests: PD test (tester accepts PoE power, displays voltage) PSE test (tester provides PoE power, displays power) Network Analysis: Sniff, list subnet, ping Video Generator: Generate NTSC/PAL and 1080p video signals of various test patterns Record Playback: Support local playback of recorded video and view screenshots
Screen	4" / 102 mm TFT 800 x 480 (WVGA) resolution, 16.7M color, backlight brightness adjustable
Operation	Power key, 12 control keys, QWERTY flip-open keyboard with 45 keys
Auto Power Off	Disable, 5-60 minutes
Keyboard	Enable/Disable tone
Software	Supports online upgrades
Network Ports	2 x 10M/100M/1G RJ45 (blue is PoE out, green is PoE in)
I/O Ports	2 x BNC (video in/out) 1 x RS-485 1 x audio in 1 x USB 1 x reset button
Power Input	PoE source or PoE injector (green RJ45 port)
PoE Power	Input: 100-230 VAC, 50-60 Hz Output: 48 V / 15 W
Power Output	PoE (802.3af, 802.3at) (blue RJ45 port), 12 VDC / 2 A
Battery	Dedicated battery, user replaceable 7.4 V lithium-ion polymer battery Capacity: 22.2 Wh
Battery Charging Time	3-4 hours, max working time 10 hours
Internal Storage	8 GB flash
LED	2 x 35-lumen LED lights
Operating Temperature	14 to 131°F / -10 to 55°C
Operating Humidity	30-90%
Dimensions	7.5 x 4.4 x 1.5" / 190 x 113 x 37 mm
Weight	3.5 lb / 1.6 kg
Digital Specifications
VDC	Range: 2/20/200/600 V Reading Range: ±19999 Minimum Resolution: 0.1 mV Accuracy: ±0.1% +8 Note: For the range of 2 VDC, no load reading should be subtracted
VAC True RMS	Range: 2/200/600 V Reading Range: ±1999 Minimum Resolution: 1 V Accuracy: ±1.2% +3
DC Current	Range: 20/200/2000 mA Reading Range: ±19999 Minimum Resolution: 1 uA Accuracy: ±0.1% +8 Note: For the range of 20 mA, no load reading should be subtracted
AC Current	True RMS Range: 20/200/2000 mA Reading Range: ±1999 Minimum Resolution: 1 uA Accuracy: ±1.2% +3
Resistance	Range: 2/20/200 kOhms, 2/20 MOhms Reading Range: 0-19999 Minimum Resolution: 0.1 Ohms Accuracy: ±0.1% +8 Note: When measuring small resistors, resistance of the probes should be subtracted
Capacitance	Range: 2/20/200 nF, 2/20/200 uF, 2/20 mF Reading Range: 0-1999 Minimum Resolution: 1 pF Accuracy: ±4% +5
Diode Forward Voltage	Range: 2 V Reading Range: 0-1999.9 Minimum Resolution: 0.1 mV Accuracy: ±0.1% +20
Continuity	Range: 2 kOhms Reading Range: 0-1999.9 Minimum Resolution: 0.1 Ohms Accuracy: ±0.1%+20
Voltage Rating	Resistance, Capacitance, Diode Measurement Protection: <400 V Connecting to voltage beyond the range will cause the meter to be damaged permanently
Fuse	2A / 250 V Size: 0.2 x 0.8" / 5 x 20 mm
Electrical Insulation	>1.5 kV mA, COM, V/W are electronic measurement connectors, which are insulated from all other interfaces
Factory Calibration	Temperature: 25 ±5°C
Temperature Stability	<100 ppm per °C, except for large current measurements
Self-Calibration	User Self-Calibration Range: ±1%
Data Rate	5 readings per second (DC voltage, DC current, resistance measurement, diode testing, continuity) 2 readings per second (AC voltage & AC current testing, capacitance testing) 0.1-5 readings per second (AC voltage & AC current testing, capacitance testing)
Refresh Rate	Analog Meter Refresh Rate: 20-40 fps, except for capacitance testing
Data History	Chart X Axis: 1/5/25 seconds per division Automatic adapt
Waveform	Display Mode X Axis: 10 ms per division Refresh Rate: 1 per second No synchronization
AC Measurement	Frequency Range: 0-1000 Hz Harmonics above 1 kHz will induce error
Diode Current Measurement	1 mA ±5%
Threshold	Breakdown Prompt Threshold: 30 mV
Conductivity	Test Current: 1 mA ±5% Beeper Threshold: 30 Ohms Beeper Response Time: <2 ms
Current	Measurement Resistance: 20 mA Grade: 5 W ±5% 200 mA Grade: 1 W ±10% 2000 mA Grade: 0.1-0.2 W
Data	Recording Frequency: 2 records per second Record Length: 0.5 sec to 9999 hours
Packaging Info
Package Weight	3.34 lb
Box Dimensions (LxWxH)	10.9 x 7.85 x 4.55"

Powers both network and analog cameras

Works with most popular network and analog cameras up to 8MP

Built-in DMM (digital multimeter)

More than 30 PTZ protocols including Dahua, Pelco D/P, Samsung, Panasonic, Lilin, and others

Analog NTSC/PAL and HD video generator

Screenshot, video recording, playback & reports

Related Questions and Answers

Q: 1. Will it show Volts Amps and Watts for a Passive POE Injector ?

A: Yes, the Triplett POE2000 PoE Tester Pro displays volts, amps, and watts of PoE signals.

Q: 2. Will this work with URSA Mini Pro?

A: Yes, this camera is compatible with most cameras and lenses. An Ursa Mini Pro should work on it well.

Q: 3. Would two people sitting at a news desk be able to read the screen?

A: That would depend on how far away the people are, but two people at a desk should be able to read from one Telmax PRO-IP-EX Universal Tablet & Smartphone Teleprompter.

Q: 4. how do i get to scroll up and down on my scrips?

A: Functionality will depend on which app is downloaded from the Apple Store as there are a multitude of apps that can be downloaded onto your iPad that are compatible with this teleprompting system.

Q: 5. my camera has a square piece on the end, that I don't know how to take off. This teleprompter says that it has a 4 inch round hole for the camera. Does it stretch over the square piece? My camera looks like it has a 4 inch lens, but it has that square piece on the end of it.

A: The square end of your camera is probably the lens sunshade. Normally they counter clock-wise twist off. The 4 round hole will accommodate most any camera. The black nylon adapter can also accommodate most any camera that could use this teleprompter. If you wish further confirmation, please email us. provideo@bhphoto.com.

Q: 6. hi, i want to know if can work with Sony hdc-1500r and if it needs some adjustments?

A: That teleprompter is too small. We recommend a larger teleprompter such as this one. MagiCue Studio 17 Prompter Package with Pro Software B&H # MAQSTUDIO17.

Q: 7. Will this model handle the new iPad model coming in at 12.9-inch and / or the new 9.7-inch model? What is the largest size tablet can this handle...dimensions please? Is the angle position of the glass hood adjustable?

A: Accroding to Telmax, the PRO-IP-XLP is best suited for the iPad Pro. The angle of the hod is not adjustable.

Q: 8. any software with this product?

A: I use proprompter by bodelin on the ipad and my I phone this way you have a wireless remote to control the software.

Q: 9. Will this work with an Panasonic AG-CX350? I'm using a Dell laptop in Tablet Mode. Will id handel the 15" folded Laptop?

A: Yes, The Telmax PRO-IP-EX Universal Tablet & Smartphone Teleprompter would support the Panasonic CX350. Also this is designed for tablets up to 11.5"

Q: 10. could this be used on a motorized slider?

A: Yes it would. As long as the slider will support the weight of both the camera and the Telmax PRO-IP-EX Universal Tablet & Smartphone Teleprompter. It mounts on normal tripod heads that you would use on sliders for mounting cameras.

There are no reviews for this product.