With built-in 10GBASE-T connectivity, the XS724EM 24-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch from NETGEAR is designed to support devices requiring ultra-fast network connectivity. Each of the 24 Ethernet ports found on this switch supports 100M/1G/2.5G/5G/10G multi-gigabit network connections while the dual SFP+ (shared) ports make it easy to connect additional uplink devices to the switch.

Once installed, the XS724EM Smart Managed Plus Switch offers a variety of L2 and L3 network management features. L2 services include extensive VLAN support with 802.1Q VLAN tagging and port-based VLANs, enhanced broadcast capabilities, and multicast filtering. L3 services include DHCP client support to streamline the addressing needs of connected devices.

Once configured, this NETGEAR switch offers a wealth of software features covering everything from managing bandwidth to IGMP snooping, and much more. Extensive QoS functionality includes port-based or 802.1p-based prioritization, layer 3-based (DSCP) prioritization, and port-based ingress and egress rate limiting. Network administrators can also utilize features including loop detection/auto DoS prevention, port trunking/link aggregation (LAG), 802.3az Energy Efficient Ethernet, port mirroring, and cable testing to ensure connected clients receive optimal network performance.

24 x Gigabit Copper Ports    2 x Shared SFP+ Ports    480 Gb/s Bandwidth    32K MAC Address Table Size    Supports up to 64 VLANs    Supports up to 128 Multicast Groups    802.3az Energy Efficient Ethernet    Extensive L2 & L3 Services Supported    Link Aggregation    Quality of Service (QoS) Functionality

L2 Services - VLANs

• IEEE 802.1Q VLAN tagging

• Port-based VLANs (physical)

L2 Services - Availability

• Broadcast, multicast, unknown unicast storm control

• Static manual LAGs (port trunking)

• IEEE 802.3x (full duplex and flow control)

L2 Services - Multicast Filtering

• IGMP snooping (v1, v2 and v3)

• Block unknown multicast

L3 Services - DHCP

• DHCP client

• Static manual LAGs (port trunking)

• Supports LACP

• Broadcast, multicast, unknown unicast storm control

• DoS attacks prevention

• Port-based rate limiting (ingress and egress)

• Port-based QoS

• IEEE 802.1p COS

• IPv4 DSCP

• IPv4 ToS

• Weighted Round Robin (WRR)

• Password management

• Web browser-based graphical user interface (GUI) for advanced configuration and management

• ProSAFE Plus Configuration Utility (PCU) for multi-switch management (requires Windows PC)

• Firmware upgrade via HTTP (Web GUI) or TFTP (Plus Utility)

• Config file transfers (backup, restore) using web browser-based management GUI or Plus Utility

• Port mirroring; many-to-one port mirroring

• Energy Efficient Ethernet (EEE) IEEE 802.3az (deactivated by default)

• Short cable power reduction

• Auto power-down

Related Questions and Answers

Q: 1. What are the temperature ranges for this device?

A: The operating temperature for this switch is 32 to 104°F / 0 to 40°C.

Q: 2. Since it mention VLANs, I'm assuming it is a managed switch?

A: Yes. The Netgear GS305E 5-Port Gigabit Managed Switch is a managed switch.

Q: 3. Hello. I was wondering if you can clarify why this switch is more costly than the Netgear M4300-52G stackable switch (BH#.NEGSM4352S) aside from this switch having 4 SFP+ 10G ports? Thanks.

A: The Netgear ProSAFE XS748T 48-Port 10-Gigabit Ethernet Smart Managed Switch offers a fast processor as opposed to the M4300-52G which doesn't have a built in processor.

Q: 4. i know that it is a rack mount, but can u set it down on a self or a desk?

A: Sure can. There are backets included to mount in a rack. You can just leave them off. One item to mention is that the power cord attaches onto the opposite side of the network ports. So just know youll have a cord and network cables coming out of both front and back.

Q: 5. Hello. Can you provide some part numbers or links to some SFP+ fiber transceivers compatible to the SFP+ ports of this switch please? I am looking for modules that can do backwards compatible to 1GbE.

A: Here is a list of transceivers currently in stock that are compatible with the Netgear ProSAFE XS748T 48-Port 10-Gigabit Ethernet Smart Managed Switch: https://www.bhphotovideo.com/c/search?q=sfp%20transceiver&filters=fct_a_filter_by%3A03_INSTOCK%2Cfct_category%3Anetwork_transceivers_27012

Q: 6. I need a poe switch to transmit my nvr video feed to several locations. does this switch support hdmi over ethernet?

A: Yes, this Netgear GS308EP 8-Port Gigabit PoE+ Compliant Unmanaged Switch will support the HDMI. The setup usually is that the cameras will connect to the switch, the switch to the NVR, the NVR to HDMI splitter (per monitor), to HDMI over Ethernet extender, to each monitor.

Q: 7. Is the fan always on ? And how loud is it ? Would one be OK working all day with this switch 5ft away ?

A: According to Netgear, the fan as DB rating of 28.8Db which is quite quiet.

Q: 8. Can this be mounted on a wall ?

A: The Netgear GS108T-300NAS does not support wall mounting.

Q: 9. Is it L2/L3 switch or just L2?

A: Yes, this Netgear GS308EP 8-Port Gigabit PoE+ Compliant Managed Switch is possible to work as L3. https://bit.ly/4aVmhYv

Q: 10. can i use ms510txup uplink port to connect cisco CBS350-8XT switch?

A: Yes, the uplink port on the Netgear Ultra60 MS510TXUP 8-Port Multi-Gigabit PoE++ Compliant Managed Switch can be connected to a Cisco CBS350-8XT 8-Port 10G Managed Network Switch.