The Touch and Go Receiver/Plate System from Wooden Camera is a quick release system with a receiver and plate that is compatible with OConnor 120mm, Sachtler 35, and Ronford-Baker RBQ. The plate attaches to the camera via the included 3/8"-16 screws, and snaps into locked mode by dropping it into the base. By pushing the lever further, you can clamp the quick release plate in place. By pulling the lever and pushing down on the side release button at the same time, you can remove the plate from the camera.

For Oconnor, Sachtler 35, Ronford-Baker    Receiver    Plate    2 x 3/8"-16 Screws

120mm OConnor Euro

Sachtler 35

Ronford-Baker RBQ

Related Questions and Answers

Q: 1. ¿This plate (1064) works in the Sachtler Panorama 7 +7 head?

A: Not that we are aware of.

Q: 2. Will one of the screws fit Canon 5D. Does the screw in the center come out?

A: Yes, it will fit the Canon 5D and the center does come out.

Q: 3. Is this compatible with the Touch and Go 35 snap-plate that is part of the BPA-6 for the Alexa 35?

A: The SHAPE Touch & Go Receiver Base is compatible with the Touch and Go 35 snap-plate that is part of the BPA-6 for the Alexa 35.

Q: 4. Will this work with an old Sachtler Caddy?

A: yes, it will

Q: 5. Hi! Is there a similar SHAPE quick release (with the same baseplate) but with a 15mm rods system? I want to be able to keep this system in a gimbal and be able to switch to a system with rods on my tripod without having to switch the baseplate. Thanks a lot !

A: Currently, SHAPE does not offer such a system. The main purpose of this Touch and Go plate is to be able to swap from a tripod head to another application and adding a rod system to it would conflict with the baseplate. Since we want this unit to be compatible with as many tripod heads as possible, it would be hard to average a rod system without conflicting with the height of the baseplate

Q: 6. Would this fit the Contour CT-30k head?

A: I would contact Sachtler regarding a replacement plate for the Contour System CT30K Head. You can reach them through phone at +1 (0)203 929 1100 or email at salessupport_USA@vitecgroup.com They are very responsive.

Q: 7. I have a Sachler DV 6 SB Tripod. I need a spare base plate?

A: Yes, this plate will work.

Q: 8. What are the dimensions, specifically the thickness?

A: We bought this for a customer, but returned it since it was too heavy and did not fit his gyro. I took notes on the dimensions and the total thickness was around 1 1/8 inches thick. Outer dimensions are 4.89 x 2.963

Q: 9. Is this the same plate size as the Sachtler DV 2 II?

A: We are not aware of the plate being compatible with the DV 2 II head. This is for a different Sachtler 35 plate.

Q: 10. Will this work on Aktiv10T head?

A: No, the Wooden Camera Micro Touch-and-Go Plate only fits in the Fits Sachtler 8T/FSB 6T/FSB10T, as listed right in the key specs of the listing of the plate.