Capture super-stabilized gimbal shots from your car, ATV, boat, snowmobile, or other vehicle with the Black Arm Standard from FLOWCINE. Purely mechanical, this three-axis dampening and vibration-reduction system hard-mounts your gimbal-and-camera setup to your vehicle, stabilizing roll and tilt as well as vertical motion and vibration. The Black Arm's design incorporates a dual-spring arm with adjustable hydraulic dampers, and a platform that levels the separately available gimbal. In addition, between the arm and the mounted gimbal there is an anti-vibration Tranquilizer mount capable of handling loads between 14.8 and 49.6 lb. Mounting the Black Arm is as simple as clamping it onto a standard 48-52mm speed rail.

The damping action of all three axes—vertical, tilt, and roll— is brought about by fully adjustable actuator hydraulic dampers. A 22-step knob enables you to precisely dial in the amount of damping you need for your shot. The Black Arm Standard ships with one damper for each of the three axes. Also included is an extra-sturdy wheeled all-black pro case with powder-coated metal corners, butterfly catches, and heavy duty-recessed handles.

Hard-Mounts Gimbal to Vehicle    For Car, ATV, Boat, Snowmobile, and More    Three-Axis Stabilization    Dual-Spring Arm    Three Adjustable Hydraulic Dampers    22-Step Damping Knob    Tranquilizer Mount    14.8 - 49.6 lb Load Capacity    Clamps onto 48-52mm Speed Rail    Pro Flight Case

Related Questions and Answers

Q: 1. Can someone share a photo of how they used a clamp instead of drilling holes in to the desk? Would love to see it successfully done and what material used to clamp.

A: The base plate of the 12" riser that is included with the O.C. White ProBroom Deluxe Mic Arm is designed to attach permanently to the desktop using four screws. To give you a better example of a stand with a riser that attaches using a clamp, check out the Auray BAE-2X Two-Section Broadcast Arm with External Springs & Integrated XLR Cable (B&H # AUBAE2X).

Q: 2. Can you send me a list of what all comes in this purchase?

A: Black Complete takes 5-32 kg (11-70 lbs)TranquilizerPro Case

Q: 3. Has anyone tried to use the FLOWCINE Serene with a Flycam Flowline vest?

A: Yes I purchased be and it works great! It's rather difficult to install onto the easy rig though!

Q: 4. Will this fit on an Exovest?

A: We have not been able to test the Flowcine Tool with the Stedicam Exovest. Here is more info about the tool. https://bhpho.to/3Ba5fnQ

Q: 5. Is there any retraclable ceiling mount mic stand? Thanks

A: Yes. Please review the following item K&M Ceiling Mount Microphone Stand BH #KMCMMSB • MFR #22150.500.55 https://www.bhphotovideo.com/c/product/1469401-REG/k_m_22150_500_55_ceiling_mount_microphone_stand.html

Q: 6. Does this come with the top handle grip for dji ronin?

A: Yes, indeed the mount that is specifically for the DJI Ronin is included.

Q: 7. Can it be hanged fron the ceiling so you can pull the mic down to use it?

A: That function would not be possible with the O.C. White Deluxe Microphone Arm and Riser System.

Q: 8. What size screws are needed to thread thru the base? I understand the length would be dictated by the thickness of the desk or wood going thru.

A: The diameter of each screw hole on the base is 1/4". You can use either wood screws or metal screws to secure the base onto your desk and select the appropriate length for the screws depending on the material and thickness of the desktop surface.

Q: 9. I have asked everywhere to find out how to use the lower swivel to extend the arm and not a single person has been able to answer that question. I can extend the top arm but cannot turn the lower swivel to extend the arm. Anyone able to help here?

A: Loosen the lower friction bolt and pull the lower arm towards you.If this does not offer a remedy, please contact O.C. White directly:O.C. White Company4226 Church StreetThorndike, MA 01079Phone: (413) 289-1751Fax: (413) 289-1754They also offer a Live Chat feature on their website: www.ocwhite dot com

Q: 10. Will this work with the Easyrig 2 400 Support Bar?

A: Yes, this will work.