Capture super-stabilized gimbal shots from your car, ATV, boat, snowmobile, or other vehicle with the Black Arm Complete from FLOWCINE. Purely mechanical, this three-axis dampening and vibration-reduction system hard-mounts your gimbal-and-camera setup to your vehicle, stabilizing roll and tilt as well as vertical motion and vibration. The Black Arm's design incorporates a four-spring arm with fully adjustable actuator hydraulic dampers and a platform that levels the separately available gimbal. In addition, between the arm and the mounted gimbal there is an anti-vibration mount capable of handling loads between 15 and 22 lb. Mounting the Black Arm is as simple as clamping it onto a standard 48-52mm speed rail.

The damping action of all three axes—vertical, tilt, and roll—is brought about by the hydraulic dampers. A 22-step knob enables you to precisely dial in the amount of damping you need for your shot. The Black Arm Complete ships with two dampers for each of the three axes. Also included is an extra-sturdy, wheeled all-black pro case with powder-coated metal corners, butterfly catches, and heavy-duty recessed handles.

Hard-Mounts Gimbal to Vehicle    For Car, ATV, Boat, Snowmobile, and More    Three-Axis Stabilization    Four-Spring Arm    Six Adjustable Hydraulic Dampers    22-Step Damping Knob    15-22 lb Anti-Vibration Mount    15-22 lb Load Capacity    Clamps onto 48-52mm Speed Rail    Pro Flight Case

Related Questions and Answers

Q: 1. Can the 3/8 screw on top be removed?

A: The 3/8 top screw on the DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal is not removable.

Q: 2. With a C-mount to m43 adaptor, can I use this lens on a Lumix g7? Thank you

A: While this lens could be adapted with an adapter it would not cover the sensor of a M4/3 camera and not be a desirable lens choice for a M4/3 camera. It would not really work properly with a M4/3 camera since it is designed for 1/2 inch sensor size cameras.

Q: 3. Can I use the Zhiyun Crane 3?

A: Yes, but you will need to find a cheese plate/screws to mount to the isolator or nose plate.

Q: 4. What is the weight of the plates and cables separately?

A: The Cloud Mount Vibration Isolator Cable Clamp will weigh .2lbs, the RigPlate will weigh 1.60lbs, and the Cable – 1/4″ x 7″ will weigh about .21lbs.

Q: 5. Will this work with the Easyrig 2 400 Support Bar?

A: Yes, this will work.

Q: 6. We are using AIDA Imaging UHD6G-200 4K which recommend a 8mp resolving capability for usable lenses. Will this line work and meet those qualifications?

A: It will not. This lens is designed to work with cameras with up to 1.5 megapixel sensors.

Q: 7. Is this compatible with an Easyrig Minimax?

A: No it is not.

Q: 8. Is the Ronin S4 compatible with this kit?

A: Yes, the DJI RS4 Gimbal Stabilizer is compatible with the Proaim Pro Vibration Isolator for Camera Gimbals (11 to 33 lb Payload).

Q: 9. What is the size of the bag laid out flat?

A: It is 11 x 5" laid flat.

Q: 10. Can this lens be used in conjunction with the aida hd-100a camera body?

A: The AIDA HD-100a is a C/CS Mount camera. It should work well with this lens.