Capture super-stabilized gimbal shots from your car, ATV, boat, snowmobile, or other vehicle with the Black Arm Complete from FLOWCINE. Purely mechanical, this three-axis dampening and vibration-reduction system hard-mounts your gimbal-and-camera setup to your vehicle, stabilizing roll and tilt as well as vertical motion and vibration. The Black Arm's design incorporates a four-spring arm with fully adjustable actuator hydraulic dampers and a platform that levels the separately available gimbal. In addition, between the arm and the mounted gimbal there is an anti-vibration mount capable of handling loads between 22 and 31 lb. Mounting the Black Arm is as simple as clamping it onto a standard 48-52mm speed rail.

The damping action of all three axes—vertical, tilt, and roll—is brought about by the hydraulic dampers. A 22-step knob enables you to precisely dial in the amount of damping you need for your shot. The Black Arm Complete ships with two dampers for each of the three axes. Also included is an extra-sturdy, wheeled all-black pro case with powder-coated metal corners, butterfly catches, and heavy-duty recessed handles.

Hard-Mounts Gimbal to Vehicle    For Car, ATV, Boat, Snowmobile, and More    Three-Axis Stabilization    Four-Spring Arm    Six Adjustable Hydraulic Dampers    22-Step Damping Knob    22-31 lb Anti-Vibration Mount    22-31 lb Load Capacity    Clamps onto 48-52mm Speed Rail    Pro Flight Case

Related Questions and Answers

Q: 1. The load capacity is 132 lbs. and the Sony camera mounted to it weighs under 2 lbs. Is that correct?

A: The DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal is made of Aluminum alloy. The weight is 1.8lbs, and the weight support is 132lbs.

Q: 2. We are using AIDA Imaging UHD6G-200 4K which recommend a 8mp resolving capability for usable lenses. Will this line work and meet those qualifications?

A: It will not. This lens is designed to work with cameras with up to 1.5 megapixel sensors.

Q: 3. What is the weight of the plates and cables separately?

A: The Cloud Mount Vibration Isolator Cable Clamp will weigh .2lbs, the RigPlate will weigh 1.60lbs, and the Cable – 1/4″ x 7″ will weigh about .21lbs.

Q: 4. Is the tension adjustable?

A: The tension on the DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal can be adjusted by removing or adding the cables.

Q: 5. I need a C-mount lens for Super 8 - requiring flange depth of 17.52mm - will these senses serve?

A: The flange depth for the Fujinon 1.5MP 9mm C Mount Lens with Anti-Shock & Anti-Vibration Technology for 2/3" Sensors is 17.52mm.

Q: 6. Can you send me a list of what all comes in this purchase?

A: Black Complete takes 5-32 kg (11-70 lbs)TranquilizerPro Case

Q: 7. With a C-mount to m43 adaptor, can I use this lens on a Lumix g7? Thank you

A: While this lens could be adapted with an adapter it would not cover the sensor of a M4/3 camera and not be a desirable lens choice for a M4/3 camera. It would not really work properly with a M4/3 camera since it is designed for 1/2 inch sensor size cameras.

Q: 8. extra locking screws part number?

A: We don't currently sell additional locking screws. You would need to contact Fujinon directly to order more. They can be contacted at 973-633-5600.

Q: 9. Any way to connect this to 2 poles instead of just 1?

A: There is not. This is designed to be connected to a single pole.

Q: 10. Is this compatible with an Easyrig Minimax?

A: No it is not.