Capture super-stabilized gimbal shots from your car, ATV, boat, snowmobile, or other vehicle with the Black Arm Complete from FLOWCINE. Purely mechanical, this three-axis dampening and vibration-reduction system hard-mounts your gimbal-and-camera setup to your vehicle, stabilizing roll and tilt as well as vertical motion and vibration. The Black Arm's design incorporates a four-spring arm with fully adjustable actuator hydraulic dampers and a platform that levels the separately available gimbal. In addition, between the arm and the mounted gimbal there is an anti-vibration mount capable of handling loads between 42 and 57 lb. Mounting the Black Arm is as simple as clamping it onto a standard 48-52mm speed rail.

The damping action of all three axes—vertical, tilt, and roll—is brought about by the hydraulic dampers. A 22-step knob enables you to precisely dial in the amount of damping you need for your shot. The Black Arm Complete ships with two dampers for each of the three axes. Also included is an extra-sturdy, wheeled all-black pro case with powder-coated metal corners, butterfly catches, and heavy-duty recessed handles.

Hard-Mounts Gimbal to Vehicle    For Car, ATV, Boat, Snowmobile, and More    Three-Axis Stabilization    Four-Spring Arm    Six Adjustable Hydraulic Dampers    22-Step Damping Knob    42-57 lb Anti-Vibration Mount    42-57 lb Load Capacity    Clamps onto 48-52mm Speed Rail    Pro Flight Case

Related Questions and Answers

Q: 1. Will this arm work for Magnus Pro XL and Samsung CRG9?

A: The Ergotron HX Desk Monitor Arm for Displays up to 42 lb (Matte Black), BH #ER45475224, will not work with the Samsung C49RG9 49" 32:9 120 Hz Curved FreeSync HDR VA Gaming Monitor (BH #SAC49RG90S). NOTE: Supports Displays up to 42"

Q: 2. Will this work with a Samsung G97T 100mm x100mm vesa pattern?

A: The Ergotron HX Desk Monitor Arm for Displays up to 42 lb (Polished Aluminum) BH #ER45475026 is rated for monitors up to 42".

Q: 3. can you hook up at 49" display to this model? Why does it say up to 42"?

A: To use an HX arm with the ultra-wide, curved Samsung 49" Odyssey G9 Monitor, you would need to also order the accessory HX Heavy-Duty Tilt Pivot (BH #ER98540216 • MFR #98-540-216). This is why it states up to 42" as the product by itself is only up to 42".

Q: 4. Is the tension adjustable?

A: The tension on the DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal can be adjusted by removing or adding the cables.

Q: 5. Can I use the Zhiyun Crane 3?

A: Yes, but you will need to find a cheese plate/screws to mount to the isolator or nose plate.

Q: 6. Any way to connect this to 2 poles instead of just 1?

A: There is not. This is designed to be connected to a single pole.

Q: 7. When extended completely, what's the height of the top of the monitor?

A: It will depend upon the dimensions of the mounted monitor. Height Adjustment 6.3 to 17.8" / 16.0 to 45.2 cm

Q: 8. Hi, I just bought a 49" ultrawide Dell monitor and wondered if this would work as a stand for it. Thanks!

A: As long as your monitors VESA mounting pattern falls between 75 x 75 to 200 x 200mm and weighs between 20 and 42lb it should work.

Q: 9. Can you send me a list of what all comes in this purchase?

A: Black Complete takes 5-32 kg (11-70 lbs)TranquilizerPro Case

Q: 10. Can it support a 300x300 mount?

A: The Ergotron HX Desk Monitor Arm for Displays up to 42 lb (Polished Aluminum) BH #ER45475026 will support 75 x 75 to 200 x 200mm Mount Patterns only.