Designed for servers, point-of-sale, routers, switches, hubs, and other network devices, the Smart-UPS Battery Backup & Surge Protector with SmartConnect from APC has a tower form factor and delivers intelligent and efficient network power protection from entry level to scalable runtime. It can provide 587 minutes of use at 50W, 339 minutes of use at 100W, 175 minutes of use at 200W, 113 minutes of use at 300W, 82 minutes of use at 400W, 63 minutes of use at 500W, 51.3 minutes of use at 600W, 42.4 minutes of use at 700W, 35.8 minutes of use at 800W, 30.8 minutes of use at 900W, 28.3 minutes of use at its half load of 960W, 26.8 minutes of use at 1000W, 20.8 minutes of use at 1000W, 16.7 minutes of use at 1400W, 13.6 minutes of use at 1600W, 11.2 minutes of use at 1800W, and 10.1 minutes at its full load of 1920W..

This Smart-UPS features an output of 1920W / 1920 VA, a NEMA 5-20P input connection, an input of 120V @ 50/60 Hz ±3 Hz, eight NEMA 5-15R battery backup outlets, two NEMA 5-20R battery backup outlets, a surge energy rating of 530 joules, line interactive topology, and a sine waveform. Included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems, and also included is an RS-232 cable and a USB cable. Support is provided by a limited 3-year repair or replace warranty that excludes the battery, as well as a limited 2-year battery warranty and a limited lifetime $150,000 equipment protection policy.

APC SmartConnect makes the Smart-UPS more adaptable and easier to deploy, enabling you to view the status of your UPS through a secure web portal. Through this remote management interface, you'll receive automatic notifications, firmware updates, and advanced support.

Open Box Products Have a Limited 3-Day Manufacturer Warranty (UPS Only)    Output: 1920W / 1920 VA    Input: 120 VAC @ 50/60 Hz ±3 Hz    8 x NEMA 5-15R Battery Backup Outlets    2 x NEMA 5-20R Battery Backup Outlets    530-Joule Surge Energy Rating    Recharge Time: up to 3 Hours    Line Interactive Topology    Sine Waveform    Cold-Start Capable    $150,000 Lifetime Equipment Protection

Provides temporary battery power when the utility power is out.

Provides actual kilowatt hours of usage for energy conscious users.

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Reduces utility costs, generates less heat.

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with user-friendly navigation keys.

Dynamically provides the month and year when battery replacement is recommended to aide in long-term maintenance planning.

Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Customize network shutdown and reboot sequences of connected servers and UPSs.

A single outlet group may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off, and non-critical load shedding.

Customize the UPS' capabilities with management cards.

Helps enables centralized management via StruxureWare Data Center Expert.

Related Questions and Answers

Q: 1. does this product come with batteries?

A: Yep

Q: 2. What is the battery connector on the back of the UPS for?

A: The port on the back marked battery is actually a disconnect, not a connector. It is recommended that you disconnect the battery during transportation, and this port provide a convenient way to do so.

Q: 3. how many hours of battery does this provide? when no electricity?

A: It will really depend on what you have plugged in. Please see the overview for a basic look at usage. You will need to calculate how much wattage all items being plugged in will pull for an hour and then calculate it from there.

Q: 4. can i control ports individually ?like scheduling shutdown for a device while keep the other running at different port?

A: The APC Smart-UPS C 1440VA with LCD does not support individually controlling the outlets.

Q: 5. Follow Up question on APC Smart Card "AP9641" & SMT3000C (and also SMT2200C): Do these units *already* have less capable cards that would need to be removed to make room to make room for AP9641 ? If so: What is the best model in this form factor and VA Capacity to buy, with the goal of deploying UPS with AP9641 card?

A: Thank you for your interest in our products. You would not need to remove any card to install the AP9641. The only thing you would need to remove is the blanking panel that covers the slot where the card is installed.

Q: 6. are batteries replaceable?

A: Yes, the battery is replaceable.

Q: 7. Does this condition the power? Would it replace the need for a Furman power conditioner?

A: This unit has a conditioner in it, but it would depend on the overall setup and how you were using the Furman.

Q: 8. What exactly does this unit provide? Power up computers? Phone?

A: Thank you for your interest in our products. This unit would provide a battery backup during a power outage. For example if you had a small power outage your equipment would stay on till the battery depletes. Usually computers are connected to it but you could connect a phone to it. You would just want to stay under 900 watts so the UPS doesn't become overloaded.

Q: 9. I know it depends on how many things are pulling from it, but how many hours would this support a MacPro work station with a cinema display, a RAID 5, a 3-drive JBOD and a cable modem?

A: You can see which UPS is recommended for the load you want and the run time here: https://www.apc.com/shop/us/en/tools/ups_selector

Q: 10. Does this come with built in ethernet or do i need to purchase an ethernet card?

A: This BH #APS3000RM2UC does have a Ethernet(RJ45) port built in.