Tvs With Rca Inputs

Rcf Pr 4093 9 Inputs, 3 Outputs Preamplifier

Product Code: ga53499
Availability: In Stock

$1,479.00 $2,055.81

Qty

2 reviews Write a review

Description
Reviews (2)

The PR 4093 9 Inputs, 3 Outputs Preamplifier from RCF is a flexible solution for paging and music applications in a PA system. It offers six balanced inputs mic/line with selectable phantom power—the first of the inputs is priority triggered by a VOX circuit—three stereo inputs on RCA connectors are also available. The outputs offer different functionalities and include tone controls on the front panel to adjust your settings. The PR 4093 provides dedicated mixing for inputs one through six that deliver

connections to recording devices on RCA sockets, mono, balanced 1/4" TRS sockets, and line out stereo sockets to two balanced XLR male connectors.

6 x Balanced XLR Inputs with Mix/Line 3 x Stereo Inputs on RCA Connectors Selectable Phantom Power Signal Presence LED for Each Input Priority Function on Input One VOX Circuit

Mono Input (Channels 1 to 6 Balanced)
Frequency Response	20 Hz to 22 kHz (±2 dB)
Total Harmonic Distortion (THD) + N	≤ 0.03% at 1 kHz
Sensitivity	-40 dBu (mic, XLR) / 0 dBu (line, 1/4" / 6.3 mm TRS jack)
Maximum Input Level	-19 dBu (mic, XLR) / +21 dBu (line, 1/4" / 6.3 mm TRS jack)
Input Impedance	2 kOhms (XLR) / 19.5 kOhms (1/4" / 6.3 mm TRS jack)
Voltage Gain	Maximum: (Mic, XLR): 60 dB to line out (balanced) 50 dB to record out (unbalanced) 60 dB to mic out (balanced) 55 dB to mono out (balanced) Maximum (Line, TRS jack): 20 dB to line out (balanced) 10 dB to record out (unbalanced) 20 dB to mic out (balanced) 15 dB to mono out (balanced)
Phantom Power	Voltage: 18 to 21 V
Stereo Inputs (Channels 7/8, 9/10, 11/12)
Frequency Response	20 Hz to 22 kHz (±2 dB)
Total Harmonic Distortion (THD) + N	≤ 0.03% at 1 kHz
Sensitivity	+10 dBu
Maximum Input Level	+21 dBu
Input Impedance	19.5 kOhms
Maximum Voltage Gain	Line: 10 dB to line out (balanced) 0 dB to record out (unbalanced) 0 dB to mono out (balanced)
Outputs	Line Out Level: 0 dBu (±2 dBu, balanced), max. +21 dBu Mic Out / Mono Out Level: 0 dBu (±2 dBu, balanced), max. +21 dBu Line Out Impedance: 250 Ohms (balanced) Mic Out / Mono Out Impedance: 250 Ohms (balanced)
Equalizer	Low: ±15 dB at 80 Hz Mid: ±12 dB at 2.5 kHz High: ±15 dB at 8 kHz
Crosstalk	Adjacent Stereo Inputs: < -68 dB Input to Output: < -76 dB at 1 kHz (ch. level at max., flat EQ Line Out level and others at min., Mic Out switch set to off)
Operating Voltage	110 to 120 or 220 to 240 VAC (50/60 Hz), 24 VDC
Rack Units	1 RU 19"
Dimensions	19.0 x 1.7 x 7.7" / 48.3 x 4.4 x 19.5 cm
Weight	6.4 lb / 2.9 kg

6 x balanced XLR inputs with mic/line sensibility and selectable phantom power

3 x stereo inputs on RCA connectors

Signal presence LED for each input

Priority function on input 1, activatable through VOX circuit

1 x XLR stereo output with 3-band EQ on front panel

1 x mono output on 1/4" jack connector

1 x mic output on 1/4" jack connector

Connection to recording device on RCA connectors

LED output level indicator

120/230 VAC functioning and 24 VDC emergency power supply

Suitable for rack installation (1 RU, 19")

Related Questions and Answers

Q: 1. What if you surpass the 2gb FAT32 file limitation? Is there a way to recover the audio that was recorded beyond the 2gb?

A: Thank you for your question. once the file limitation is met there is no way to recover the audio past the 2GB mark.

Q: 2. Does this fit into a standard cheese plate?

A: The RCF Eye Bolts are made specifically for attaching to speakers to hang them. 10mm = 0.393701 inches. Most cheese plates are 1/4 20 (6.35mm) or 3/8 (9.525mm). These are not meant for a cheese plate.

Q: 3. I have a Zoom H6 recorder and want to use it with the Senheisser MKE-2 lav mic (which needs 7.5V). Would I need to turn the Phantom power on in the recorder to 48V?

A: Yes, that is exactly correct.

Q: 4. Is the Porta Brace PR-C3B water proof?

A: This case is NOT waterproof or weather treated.

Q: 5. Could this device work with the Sanken COS-11D Omni Lavalier Mic(B&H # SAC11WNSETRB MFR # SAN-11DWNBKTRSE)? Thanks Renzo

A: MZA-900P is listed for compatibility with Sennheiser E 908B, E 908D, HSP 2, HSP 4, ME 2, ME 3, ME 4 and MKE 2 EW Gold microphones. We offer this model for the Sanken COS-11D with the 3.5mm connector for Sennheiser transmitters: B&H # AMEMP3.5

Q: 6. Would this device work with the Countryman b3 Lav Mic mini 1/8 connector for Sennheiser? a href= http://www.bhphotovideo.com/c/product/294555-REG/Countryman_B3W4FF05BSR_B3_Omnidirectional_Lavalier_Microphone.html target= _blank http://www.bhphotovideo.com/c/product/294555-REG/Countryman_B3W4FF05BSR_B3_Omnidirectional_Lavalier_Microphone.html/a

A: This device should work fine with the Countryman B3 (for Sennheiser EW series transmitters).

Q: 7. Will this accept 240V or only 110V? Thanks

A: This will only do 110-125v.

Q: 8. does this have the RIAA equalization built in?

A: No this Pyle Pro phono amp does not have RIAA . try this one instead. Link below copy link and paste on your browser. https://www.bhphotovideo.com/c/product/155434-REG/Rolls_VP29_VP29_Phono_Preamp.html/overview

Q: 9. When an input is set to line does it transmit phantom power? If I use phantom power because I need it for a microphone input will it damage the Denon DN-300ZB that is also plugged into two of the input channels but set to line mode.

A: No, engaging phantom power for microphone input connections on the JBL CSM 28 Eight Inputs/Two Outputs Commercial Series Mixer would not affect a connection from a line level source such as the Denon DN-300ZB Media Player. It should be noted that the phantom power offered from this amplifier is 27VDC as opposed to the more common 48V.

Q: 10. The dimensions listed here and on Porta Brace's website don't match. Will this fit a 15.6x6.2x12.4 projector?

A: Per PortaBrace: Weight: 4.30 lb / 1.95 kg Interior: 17" x 5" x 13.25" / 43.18 x 12.70 x 33.66 cm Exterior: 22" x 8.25" x 14.5" / 55.88 x 20.96 x 36.83 cm Thank you for bringing this to our attention.

Glenn	11/09/2024
It does its's job and looks good doing it. I like the design of Bellari products with their clean , cluttered looks. 5

Spencer	01/06/2024
Impressed. Imported to UK. Far more detail than an ALPS Blue, not as much heft, but has more of everything. Extremely well built for price, high quality thick metalwork. Quirky coloured but I love it. Knobs are an acquired taste, plastic and gold metal effect coloured but do the job. An audiophile bargain unit! 5