You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Skb Iseries 1510-9 Waterproof Utility Case With Foam Dividers And Lid Organizer (black)

Skb Iseries 1510-9 Waterproof Utility Case With Foam Dividers And Lid Organizer (black)
  • Product Code: ga53680
  • Availability: In Stock

$749.97 $1,154.95

The black iSeries 1510-9 Waterproof Utility Case with Foam Dividers and Lid Organizer from SKB features an interior with foam dividers and a lid organizer for separating and cushioning the items you are transporting. The injection-molded case is made of polypropylene copolymer resin and is waterproof, gasketed, dust-tight, and submersible (MIL-C-4150J). The case is also resistant to UV, solvents, corrosion, fungus, and impact damage. Molded-in hinges and trigger release latches add to the security of the case. A comfortable rubber overmolded cushion grip handle snaps into vertical/horizontal place for convenient carrying. A built-in automatic ambient pressure equalization valve (MIL-STD-648C) allows for safe air travel.

Waterproof / Gasket-Sealed    ATA 300 Rated    Impact-Resistant / Dust-Tight    UV and Solvent Resistant    Corrosion and Fungus Resistant    Molded-In Hinge    Pressure Equalization Valve    Snap down Cushioned Handle    Trigger Release Latch System    Stainless-Steel Locking Loops

Key Specs
ColorBlack
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeAdjustable Dividers (Hook & Loop), Lid Organizer
Water ResistanceWaterproof
IP67
DimensionsExterior
16.2 x 13 x 9" / 41.15 x 33.02 x 22.86 cm
Interior
15 x 10.5 x 9" / 38.1 x 26.7 x 22.9 cm
1.75" / 4.45 cm (Lid Depth)
7.25" / 18.41 cm (Base Depth)
Parameters
Camera CompatibilityUniversal
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeAdjustable Dividers (Hook & Loop), Lid Organizer
Features
ATA CompliantYes
Pressure/Purge ValveYes
Security LockAccepts Padlock (Not Included)
General
Water ResistanceWaterproof
IP67
Padded InteriorYes
MaterialsExterior: Polypropylene
DimensionsExterior
16.2 x 13 x 9" / 41.15 x 33.02 x 22.86 cm
Interior
15 x 10.5 x 9" / 38.1 x 26.7 x 22.9 cm
1.75" / 4.45 cm (Lid Depth)
7.25" / 18.41 cm (Base Depth)
Packaging Info
Package Weight9.3 lb
Box Dimensions (LxWxH)15.25 x 11 x 9.75"

Stainless-steel locking loops

Waterproof and dust-tight design

Molded-in hinge for added protection

Trigger release latch system

Snap-down rubber overmolded cushion grip handle

Ambient pressure equalization valve

Resistant to UV, solvents, corrosion, fungus

Resistant to impact damage

ATA 300 rated (Airline Transportation Association)

Accepts TSA (Transportation Security Administration) latches

Related Questions and Answers

Q: 1. Does this fit the xa40?

A: Yes it does. This case is for the Canon XA40.

Q: 2. Will this case be tall enough to hold a Nikon D850 with the MB-D18 attached along with a lens?

A: Yes, indeed. No problem at all.

Q: 3. Would this case hold a G50, being that the G50 is basically a XA40 without the handle?

A: The Canon G50 will fit in this case, however, it will not be as effective at protecting the camera. The excess space (for the top handle) gives the camera room to move around inside the case. If you plan to use this for keeping your camcorder organized then this case will work very well. All of the accessories are the same for both camcorders (except audio).

Q: 4. Can this case fit the Canon XA50?

A: No. The XA50 is considerably larger than the other cameras supported with this product.

Q: 5. Is there a laptop pocket in the lid?

A: The lid organizer in the SKB iSeries 1510-9 Waterproof Utility Case features three separate laminated zippered clear mesh pockets for storage of cables, lens caps, or other small accessories. Behind the pockets is a polyester-lined tablet/small laptop top-load pocket

Q: 6. Is the SKB 1510-6 (with lid organizer) deep enough to close easily on a Nikon D7100 with battery grip and an Arca quick-release plate attached? Thanks!

A: Yes, according to the depth of the case and the combined dimensions of the camera and grip, it will fit.

Q: 7. What's the depth from foam base to the foam top? What is the interior width & length with the ThinkTank outer padding?

A: The SKB iSeries 1510-6 Case with Think Tank Photo Dividers & Lid Foam has a 1.75" / 4.45 cm (Lid Depth) and 4.25" / 10.79 cm (Base Depth).

Q: 8. What size laptop will fit in this case?

A: Hi Jay, Up to a 15 Macbook Pro or similar sized 15 laptop will fit into the case. That being said a 15 will be pretty snug and does not provide a lot of protection where the strap holds the laptop into position. An image can be seen on Think Tank's website with a 15 Macbook Pro to give you an idea. If you own a 15 laptop and need it more protected the 3i-2011-7DL would be a much better fit. Thank you,Will

Q: 9. Can this bag hold a Nikon D90 or D7000 with battery drive and 80-200 lens attached?

A: I have the version of this case with the foam cell liner in the lid rather than the lid organizer, I can fit a D500 w/battery drive and 200-500mm f/5.6 attached lens hood reversed.

Q: 10. Is the 1510-6 also a rolling case ?

A: Hi Steven, The 3i-1510-6 case does not have wheels. The smallest case we offer with wheels is our 3i-2011-7DL. For that same sized case we have some other interior options. 3i-2011-7DT, 3i-2011-7DZ, and 3i-2011-7BP.Thank you,Will

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Hprc 4200 Hard Case (black, Cubed Foam)

$687.00 $845.01

Overboard Waterproof Slr Camera Bag

$119.85 $163.00

Lenscoat Bodybag R Camera Cover (blue)

$89.25 $136.55

Tiffen 86mm 85c Color Conversion Filter

$491.85 $752.53

Products You May Like

4ms Flying Bus Cable (male-pins)

$42.00 $54.18