Connect two BNC cables to extend their length with the Canare BCJ-JK BNC Coupler. It features gold-plated contacts for enhanced connectivity and supports 12G-SDI.

Supports 12G-SDI    Gold-Plated Contacts    Connects Two Male BNC Cables

• Compatible with 12G-SDI

• Gold-plated beryllium-copper center contact for enhanced spring characteristics

• Return loss of ≥26 dB at 3 GHz and ≥15 dB at 12 GHz

Related Questions and Answers

Q: 1. Are these adapters directional? Or does signal get converted both ways?

A: The Canare BCJ-XP-TRC Digital Audio Impedance Transformer is used to passively convert 75 ohm BNC coaxial cable to 110 ohm/XLR3 standard AES/EBU digital audio signal. The input is a BNC female receptacle (75 ohm) and the output is an XLR 3-pin male connector (110 ohm). It is a directional adapter.

Q: 2. Do you have this in a longer cord? Or is there an extension cord that could be used with this?

A: There are several extension cords which will do this. I recommend using a 1/4 TRS cable such as the ones found at https://a href= http://www.bhphotovideo.com/c/search?Ntt=1%2F4%22%20TRS%20extension%20cable&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search= target= _blank www.bhphotovideo.com/c/search?Ntt=1%2F4%22%20TRS%20extension%20cable&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search=/a .

Q: 3. I have a handful of couplers from before the days of SDI video. Could I expect those to work with SDI cables or would I need to purchase this product? Thanks.

A: Regarding your question about needing to purchase the Canare BCJ-JK BNC Coupler, current SDI signals have higher bandwidth, and new couplers are recommended to ensure proper signal strength.

Q: 4. How many dB signal loss would be expected through a BNC coupler at 3G SDI frequencies?

A: there isn't a stated about of signal loss, Canare states that it is negligible

Q: 5. can i use this rig with an Apple iPhone XS to then connect a phone call through a mixing board for an audio podcast?

A: The JK Audio AutoHybrid is a telephone audio interface, specifically for an old-fashioned landline, and will not work with a smartphone. I would recommend the JK Audio Daptor Three Bluetooth Cell Phone Audio Interface, B&H # JKDAP3, which can be connected to your iPhone through a 3,5mm cable or Bluetooth wireless, and can be inputted into your mixer. There is also a LINE IN on the unit, so you can send the signal back to the caller. You would require a mixer with and AUX Out feature.

Q: 6. I am experience a clicking noise when I feed an audio signal through the THAT2 unit. Any recommendations on how to resolve that noise? or suggestion on different equipment.

A: Clicking is often from telephone line. Try using the line input, as a test to see if its clean, then you know its the phone line.

Q: 7. Is this electrically the same as the Canare BCJ-XJ-TRC 110 only with the xlr-m connector? Could this be used with an xlr f-f gender reverser to go from xlr 110 ohms to coax 75 ohms?

A: My first guess would be yes. Have never tried it and I'm not in a position to test it at the moment.

Q: 8. I am trying this device with an Olympus digital recorder, connected via RCA cable. How do I reduce static noise? It seems that the noise level is amplified when connected. Not sure if the issue is THAT-2 or my battery-powered digital recorder...

A: I have not yet put into use this device

Q: 9. how many ohms?

A: 75 ohms

Q: 10. Do these come with screws and nuts to mount them?

A: The Canare BCJ-JRUK BNC to BNC Flush-Mount Receptacle for 12G-SDI Installations does not come with mounting hardware.